Professional Documents
Culture Documents
Name : _________________________
Group : _________________________
Date : _________________________
Image 1
1. Before you try this, make a prediction. How bright will the lamps be? Will they both be
equally bright, or will one be brighter than the other?
Try to give an explanation for your prediction. Discuss your ideas with a partner, and
then present them to the mainroom.
Prediction :
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
2. Build the circuit and test your ideas. Do you need to change your ideas?
____________________________________________________________________________
____________________________________________________________________________
____________________________________________________________________________
3. Predict what you will observe if you make a circuit with three lamps, all in a row. Test
your prediction and result.
PAGE 1
Image 2
Prediction : _______________________________________________________________
Result : _______________________________________________________________
4. Take a screenshoot your circuit like diagram above from phet simulation here (as proof
that you have done a simulation)!
PAGE 2
B. Measuring Electric current
1. Set up a circuit with a cell and two lamps, as before. You should find that the two lamps are
equally bright.
2. Connect an ammeter as shown at position 1 in a circuit. Note the value of the current.
3. Repeat with the ammeter at position 2, and then position 3
Ammeter
Current of Electricity (A)
Position
Position 1
Position 2
Position 3
4. Discuss whether your results agree with what you found when you used lamps instead of
ammeter.
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
5. Take a screenshoot your circuit like diagram above from phet simulation here (as proof that
you have done a simulation)!
PAGE 3