Professional Documents
Culture Documents
Schaefer VVD Flyer Arkel Arcode en
Schaefer VVD Flyer Arkel Arcode en
WIRING
Easy plug&play installation on
site
Arkel components are available
Components and wiring from a single source at SCHAEFER ex stock
Simple combination option of
We deliver ready-to-connect fixtures that are fully tested for your Arkel ARL-500 lift controller. They can be put
into service on site via plug&play. Many Arkel PCBs and indicators are available directly ex stock. SCHAEFER
SCHAEFER and Arkel compo-
buttons, indicators, displays and luminous arrows can be easily integrated in the Arkel infrastructure. nents
Landing Operating Panel - LOP Landing Indicator Panel - LIP Car Operating Panel - COP
BCLCD-A
TFT-800
BCLCD-A
with 2x LP 8080
BC-D3
ARCODE
IO-0210
LCD-240X128A
CPC
BC-D2
BCBUT
ARCODE Lift controller
BCBUT
LCD indicator with a resolution of 128x64 pixels. Horizontal installation in lift car and indicator fixtu-
res/vertical installation in landing fixtures. Two call buttons can be connected. AQ call and Gong mo-
dule from SCHAEFER can be optionally connected. Direction arrow indicator, floor-dependent graphics,
‘out-of-operation’ and overload symbols.
LCD-240X128A
LCD indicator with a resolution of 240x128 pixels (114x64 mm display area). Floor-dependent graphics,
dynamic and static direction arrows, ‘out-of-operation’ and overload symbols, date and time option. LCD
contrast can be adjusted.
CPC
Car fixture node (Car Call Control Unit / Car Command Controller) for connecting buttons, indicators,
emergency light, alarm, etc.
ARCODE IO-0210
Arkel Bus to Gray/Binary Code converter for wiring SCHAEFER displays such as DMD, TFT, etc.
SCHAEFER components
DMD - Dot Matrix Displays
DMD 27, DMD 30, DMD 35 and the dot matrix displays of series DMD 50 can be connected in the car
fixture using the IO-0210 (Arkel Bus to Gray/Binary code converter).
via IO-0210
TFT
SCHAEFER TFT displays can be connected using the IO-0210 (Arkel Bus to Gray/Binary Code converter).
An up-to-date overview of all TFTs can be found in our online catalogue at: products.ws-schaefer.com
via IO-0210 via IO-0210
Arkel | V1.0 | 03/2018 | SCHAEFER GmbH
Luminous arrows
Luminous and prism arrows such as LP 4848 LED, PP 4848 LED, LP 8080 and the EPSILON arrow EA 6644
can be connected via BC-D2, BC-D3 oder BCLCD-A.
via BC-D2, BC-
D3 or BCLCD-A
Additionally, further SCHAEFER components can be wired to ARKEL controllers. Further information is available upon request.
www.ws-schaefer.com
For further information on our
products, please refer to our
SCHAEFER GmbH online catalogue.: