This document specifies the properties and requirements for a type of cationic rapid-setting bitumen emulsion called CRS-2 according to ASTM standards. CRS-2 must have a viscosity between 100-400 Saybolt Furol seconds, storage stability of less than 1% change after 24 hours, demulsibility of at least 40%, and a positive particle charge. Upon distillation, CRS-2 residue must be between 65-100% and have a penetration of 100-250, ductility over 40 cm, and solubility over 97.5% in trichloroethylene.
This document specifies the properties and requirements for a type of cationic rapid-setting bitumen emulsion called CRS-2 according to ASTM standards. CRS-2 must have a viscosity between 100-400 Saybolt Furol seconds, storage stability of less than 1% change after 24 hours, demulsibility of at least 40%, and a positive particle charge. Upon distillation, CRS-2 residue must be between 65-100% and have a penetration of 100-250, ductility over 40 cm, and solubility over 97.5% in trichloroethylene.
This document specifies the properties and requirements for a type of cationic rapid-setting bitumen emulsion called CRS-2 according to ASTM standards. CRS-2 must have a viscosity between 100-400 Saybolt Furol seconds, storage stability of less than 1% change after 24 hours, demulsibility of at least 40%, and a positive particle charge. Upon distillation, CRS-2 residue must be between 65-100% and have a penetration of 100-250, ductility over 40 cm, and solubility over 97.5% in trichloroethylene.