Professional Documents
Culture Documents
SURFACE PREPARATION • Ensure that the surface is structurally sound and free of dust, dirt, oil, laitance, paint, algae and mildew.
• Scrape off cement residue, loose material, and sand away rough edges for a smooth surface.
• Surface must be cured 5-7 days before application.
PRODUCT PREPARATION Mix 10 parts of DAVIES® MONDO™ SKIMCOAT 1K to 3.5 - 4 parts of clean tap water. A 20-KG bag of
DAVIES® MONDO™ SKIMCOAT 1K needs approximately 7.5 - 8 liters of water. Use a plastic pail, add the
water by increments to DAVIES® MONDO™ SKIMCOAT 1K and mix thoroughly for a homogenous, lump-free
mixture.
It is recommended to use a hand drill or electric mixer for 2 minutes to attain a smooth, consistent and creamy
paste.
Allow the mixture to stand for 3-5 minutes and stir again prior to application.
It is best to mix only a sufficient amount that can be applied within 1 - 2 hours. Warm, exterior conditions will
shorten pot life.
Do not add water to extend pot life as excess water will affect the final performance.
Page 1 of 2
DAVIES MONDO SKIMCOAT 1K
APPLICATION 1 Light water misting on the concrete surface is recommended before applying the DAVIES® MONDO™
SKIMCOAT 1K mixture.
2 Use a clean stainless steel cement trowel.
3 Recommended thickness is 0.50mm - 2.00mm. For thick application requirements, apply 2 coats with a 30-
minute interval between coats.
4 Light sanding may be done to correct application unevenness.
5 Ensure that dust and dirt are completely wiped off.
6 Allow the surface to cure for 24 hours then finish with the recommended painting system for skimcoat-
applied masonry surfaces.
SAFETY AND STORAGE DAVIES MONDO SKIMCOAT 1K is a cementitious product. Avoid prolonged exposure to skin.
Store in a cool, dry place to prevent premature cement curing brought about by moisture.
Page 2 of 2