Professional Documents
Culture Documents
Multi
Sentry
TRANSPORT EMERGENCY
10-20 kVA
6
VFI
TYPE
ONLINE Tower
USB SmartGrid
plug ready
HIGHLIGHTS The Multi Sentry series is ideal for by a DSP (Digital Signal Processor)
protecting data centres and microprocessor, to provide maximum
telecommunications systems, IT networks protection to the powered loads with no
• Large power size and critical systems in general, where the impact on downstream systems, and
selection 10, 12, 15, risks connected with poor energy supply can optimised energy savings.
20 kVA compromise the continuity of activities and
services. The Multi Sentry series is available Zero impact source
• Small footprint in 10-12-15-20 kVA models with three- Multi Sentry solves installation problems in
phase/single-phase input and single-phase systems where the power supply has limited
• Zero impact source output, and 10-12-15-20 kVA models with power available, where the UPS is supported
three-phase input and output and on-line by a generator or where there are
• Flexibility of use double conversion technology in accordance compatibility problems with loads that
with VFI-SS-111 classification (as set out in generate harmonic currents; Multi Sentry
• Advanced standard IEC EN 62040-3). Multi Sentry is has a zero impact on its power source,
communications designed and built using state-of-the-art whether this is the mains power supply or a
technology and components. It is controlled generator:
• input current distortion < 3% the main causes of reduced reliability and Q (kVAr) %
• input power factor 0.99 battery life. Using a high frequency battery
• power walk-in function that ensures charger, Multi Sentry reduces this value to
progressive rectifier start up negligible levels, prolonging battery life and 100 CAPACITIVE
• start-up delay function, to restart the maintaining high performance over a long
rectifiers when mains power is restored if period of time. Wide voltage range: the 80
there are several UPS in the system. rectifier is designed to operate within a wide
In addition, Multi Sentry plays a filtering and input voltage range (up to - 40% at half 60 cosfi 0.9
e.g.: 10 kVA UPS
power factor correction role in the power load), reducing the need for battery supplies
40 9 kW load
network upstream of the UPS, as it discharge and thus helping to extend
eliminates harmonic components and battery life. cosfi 1
20 e.g.: 10 kVA UPS
reactive power generated by the power supplies
utilities. Maximum reliability and %S0
9 kW load
Dimensions
(mm) BB
2000
1600
1320
BB
BB
40 5 86
0 81 65 0 0
0 75 80
0
DETAILS
CONNECTORS
SLOTS FOR REPO - AS400
ACCESSORY USB - RS232
COMMUNICATION
CARDS PARALLEL
ENERGYSHARE SLOTS
SOCKETS (10A
MAX. TOTAL PARALLEL PCB
ON THE TWO (OPTIONAL)
SOCKETS) COMMUNICATION
AND RELATIVE PORTS (AS400,
PROTECTION USB, RS232)
BATTERY START
BUTTON SWBATT
(COLD START)
VENTILATION
MANUAL BY- FANS SWBYP
PASS SWITCH
BATTERY FUSE
HOLDER
ISOLATOR
OUTPUT SWITCH SWMB
TERMINAL
COVER PANEL
ENERGYSHARE
SOCKETS
BRAKE ROD
OPTIONS
DATMSTB2T18CREN The information in this document is subject to change without notice. Riello UPS assumes no responsibility for any errors that may appear in this document.
OUTPUT
Nominal power (kVA) 10 12 15 20 10 12 15 20
Active power (kW) 9 10.8 13.5 18 9 10.8 13.5 18
Power factor 0.9
Number of phases 1 3+N
Nominal voltage (V) 220-230-240 Vac single-phase + N (selectable) 380-400-415 Vac three-phase + N (selectable)
Static variation ± 1%
Dynamic variation ± 3%
Crest factor 3 : 1 Ipeak/Irms
Voltage distortion ≤ 1% with linear load / ≤ 3% with non-linear load
Frequency 50/60 Hz
Frequency stability during
0.01%
battery operation
BATTERIES
Type VRLA AGM/GEL/NiCd/Li-ion/Supercaps
Recharge time 6 hours
INFO FOR INSTALLATION
Weight without batteries (kg)
80/105 82/110 90/115 95/120 80/105 82/110 90/115 95/120
(MCM/MSM)
Dimensions (WxDxH) (mm) 320 x 840 x 930 (MCM/MCT version) / 440 x 850 x 1320 (MSM/MST version)
Communications 3 slots for communications interface / USB / RS232
Operating temperature 0 °C / +40 °C
Relative humidity 90% non-condensing
Colour Dark grey RAL 7016
Noise level at 1 m [dBA ±2]
< 40 dBA
Smart Active
IP rating IP20
Smart Active efficiency up to 98% up to 99%
European Directives: L V 2014/35/EU low voltage Directive
EMC 2014/30/EU electromagnetic compatibility Directive
Standards
Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2
Classification in accordance with IEC 62040-3 (Voltage Frequency Independent) VFI - SS - 111
Moving the UPS castors / Pallet Jack (10 - 20 kVA)
BAT
Also available with internal batteries