Professional Documents
Culture Documents
Personal Protective Equipment Required Hardhat, Safety Glasses, Hand Gloves, , Ear muffs/plugs, Full Body Harness,
Safety Shoes
Project Title :
Revised JSA Review
Check One New JSA
Revision# Date
Use of step ladder Uninspected, poor, damage step ladder Ensure that ladder is inspected, good condition
& all components are in place.
Ensure the stiles are not bent or damaged.
Ensure that rungs should not be bent, missing,
loose.
Ensure the locking bars are engaged.
Do not use aluminum step ladder for inside
sub-stations or high voltages rooms & for live
electrical work.
Persons may fall from ladder Ladder must be placed on firm level ground,
and ensure that ladder legs are fully extended.
Maintain three point contact system.
One person is allowed in one time.
Do not use top two rungs.
Always grip the ladder and face the ladder
rungs while climbing or descending—don’t slide
down the stiles.
Avoid holding tools or other object while
climbing.
Avoid over-reaching.
Ladder feet should be fitted with rubber for
strong grip with ground.
One person should hold the ladder while
working on ladder.
Do not lean ladder with wall or any other
object.
Do not place ladder on any object.
Persons must be trained in order to work on
step ladder.
Use of scaffolding for work at height Uninspected, poor erected, missing Scaffold must be inspected by authorized
components scaffold Scaffold Supervisor/Inspector.
Always check inspection tag before use of
scaffold, ensure that inspection is valid.
Ensure that all components are in placed & well
tight.
Persons may fall while work at height Maintain three point contact system while
cause serious injury or death using ladder.
Wear inspected, color coded & good
conditioned full body harness.
Full body harness’s snap hooks must be tied
with anchor point all the times.
Do not climb on toe board & guard rails.
Stay only within platform. Do not climb on
structure or any other object.
Ensuring that information, instruction, training
and supervision of all personnel is provided to
enable them to safely perform their work at
height.
Scaffold platform must be clear from
obstruction, do not keep unnecessary
tools/material on platform & all tools/material
must be well arranged in a side.
Improper method of getting material Use canvas basket & nylon rope for transfer
tools & light material.
Use pulley system.
Do not throw any tools/material from ground
to height and from height to ground.
Personnel injury Use all mandatory PPEs all the time along with
full body harness.
Peoples must use chip strap while work at
height.
Scaffold may collapse Provide barricade with warning signs around
scaffold.
Before every use, ensure that scaffold is in
stable condition & all components are in place.
Scaffold must be re-inspect after hit by any
moving equipment, alteration, or heavy winds.
Unauthorized modification or removal of Erection, dismantling & modification is only
scaffold component allowed to certified scaffolders under the
supervision of certified supervisor.
Unauthorized persons are strictly not allowed
to modify any component of scaffold.
Use of scissor lift for work at height Unauthorized use Scissor lift must be operated by certified
operator; he must hold valid TUV for the
specific equipment.
Remove Ignition key (if fitted).Lock all
cabinets/covers when leaving the machine.
Poor working environment Scissor lift must be use in well ventilated area.
Do not operate scissor lift in bad weather e.g.
heavy winds, heavy Rain, thunder and lightning
etc.
Must be operated on firm level ground.
Provide barricade with warning signs around
working area.
Fire & explosion Gas test results must be satisfactory.
Remove all combustible/flammable material
from area, or cover with fire blanket.
Never refuel the machine whilst it is being
operated or the engine is running.
Always refuel the machine in a well ventilated
area.
Ensure there are NO naked flames or ignition
sources.
NEVER smoke during refueling.
Avoid spilling fuel and immediately clean up
any spilled fuel.
Collision with pedestrians, other vehicles A trained flag man must be used while
or fixed objects while movement movement of scissor lift.
Ensure all safety devices such as audible and
visual alarms are operating when the scissor lift
is in motion.
Operator must follow flag man instructions.
Overturn Speed limit must not be exceeded.
Do not take sharp turn.
Avoid over loading.
Do not use on uneven ground.
Ensure the load is evenly distributed on the
platform and within the manufacturer’s SWL
for that machine.
Crushing hazard (Someone may crushed Clear all personnel from the area before raising,
when slewing, raising or lowering lowering or slewing the Platform.
platform
Persons in Platform may crushed Beware of over head utilities. Do not go very
between the Platform & overhead close to the overhead utilities.
structure
Electrocution from Overhead Power lines Maintain mandatory minimum clearances from
overhead power lines.
Look Up and Live(before and during operation).
Falling from Platform. Remain within the confines of Platform. Never
sit, stand or climb on handrails.
Wear full body harness & always ensure it is
attached to the specified anchor point.
Never use ladders or scaffolding on the
Platform
Never enter or exit the platform when
elevated.
Tools & material may fall from platform Scissor lift platform must be fitted with suitable
toe board.
Barricade working area & place warning signs.
Always maintain tools & material on platform.
Slipping on Platform Floor Ensure floor is kept clean, good condition and
intact.
Avoid oil, grease and mud on boots on
platform.
As practicable, maintain work platform/basket
clear of rubbish and tools.
Always maintain a good foot and hand hold
when entering or exiting the platform.
Entanglement between moving parts Keep personnel clear.
Barricade off/designate work area.
Never wear loose fitting clothing etc.
Electric shock from damaged extension Inspect cords & plugs for, cuts & damage.
cords if electrical work will performed Ensure cords are protected from falling objects,
pinch points, or pedestrians or other traffic. Do
not pull cord around sharp edges or corners.
Use of manlift for work at height Unauthorized use Man lift must be operated by certified
operator; he must hold valid TUV for the
specific equipment.
Remove Ignition key (if fitted).Lock all
cabinets/covers when leaving the machine.
Poor working environment Man lift must be use in well ventilated area.
Do not operate man lift in bad weather e.g.
heavy winds, heavy Rain, thunder and lightning
etc.
Must be operated on firm level ground.
Provide barricade with warning signs around
working area.
Fire & explosion Gas test results must be satisfactory.
Remove all combustible/flammable material
from area, or cover with fire blanket.
Never refuel the machine whilst it is being
operated or the engine is running.
Always refuel the machine in a well ventilated
area.
Ensure there are NO naked flames or ignition
sources.
NEVER smoke during refueling.
Avoid spilling fuel and immediately clean up
any spilled fuel.
Collision with pedestrians, other vehicles A trained flag man must be used while
or fixed objects while movement movement of man lift.
Ensure all safety devices such as audible and
visual alarms are operating when the man lift is
in motion.
Operator must follow flag man instructions.
Shearing or cutting of body or limbs Never put any part of your body through or
under a raised hydraulics.