Professional Documents
Culture Documents
ID
Marks 1
Unit A2
ID
Question While calculating the shear force, the upward forces to the left of the section
are considered ___________.
A positive
B negative
C zero
D none of theabove
Answer A
Marks 1
Unit A2
ID
Question The bending moment produced by upward forces to the left of a section
is___________.
A upward
B downward
C sagging
D hogging
Answer C
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Question If there is an upward point load acting on the beam, there will be a downward step
on ___________.
A load diagram
B S.F.D
C B.M.D
D none of the above
Answer D
Marks 1
Unit A2
ID
Question If there is a downward point load acting on the beam, there will be a downward
step on ___________.
A load diagram
B S.F.D
C B.M.D
D none of the above
Answer B
Marks 1
Unit A2
ID
Question If there is an anticlockwise couple moment acting on the beam, there will be a
downward step on ___________.
A load diagram
B S.F.D
C B.M.D
D none of the above
Answer C
Marks 1
Unit A2
ID
Question If there is a point load acting on the beam, there will be ___________ on S.F.D.
A step
B horizontal straight line
C inclined straight line
D parabola
Answer A
Marks 1
Unit A2
ID
Question If there is no load acting on the beam between two points, there will
be___________ on S.F.D.
A step
B horizontal straight line
C inclined straight line
D parabola
Answer B
Marks 1
Unit A2
ID
Question If there is a uniformly varying load acting on the beam, there will be ___________
on S.F.D.
A step
B horizontal straight line
C inclined straight line
D parabola
Answer D
Marks 1
Unit A2
ID
Question If there is no load acting on the beam between two points, there will be
___________ on B.M.D.
A horizontal straight line
B inclined straight line
C parabola
D either A) or B)
Answer D
Marks 1
Unit A2
ID
Question If there is a uniformly distributed load acting on the beam, there will be
___________ on B.M.D.
A horizontal straight line
B inclined straight line
C parabola
D third degree curve
Answer C
Marks 1
Unit A2
ID
Question If there is a uniformly varying load acting on the beam, there will be___________
on B.M.D.
A horizontal straight line
B inclined straight line
C parabola
D third degree curve
Answer D
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
A maximum
B minimum
C zero
D none of the above
Answer C
Marks 1
Unit A2
ID
Question If there is inclined straight line on S.F.D., there will be ___________ acting on the
beam.
A point load
B u.d.l
C u.v.l
D couple moment
Answer B
Marks 1
Unit A2
ID
Question If there is parabola on S.F.D., there will be ___________ acting on the beam.
A point load
B u.d.l
C u.v.l
D couple moment
Answer C
Marks 1
Unit A2
ID
Question If there is vertical step on B.M.D., there will be ___________ acting on the beam.
A point load
B u.d.l
C u.v.l
D couple moment
Answer D
Marks 1
Unit A2
ID
Question If there is a parabola on B.M.D., there will be ___________ acting on the beam.
A point load
B u.d.l
C u.v.l
D couple moment
Answer B
Marks 1
Unit A2
ID
Question If there is a cubic curve on B.M.D., there will be ___________ acting on the beam.
A point load
B u.d.l
C u.v.l
D couple moment
Answer C
Marks 1
Unit A2
ID
Question From S.F.D we cannot locate the position of ___________ acting on the beam.
A point load
B u.d.l
C u.v.l
D couple moment
Answer D
Marks 1
Unit A2
ID
Question From B.M.D we cannot locate the position of ___________ acting on the beam.
A point load
B u.d.l
C u.v.l
D couple moment
Answer A
Marks 1
Unit A2
ID
Question A simply supported beam AB of length L carries a point load P at the centre C. The
shear force just to the left of C is ___________.
A P
B P/2
C –P/2
D 0
Answer B
Marks 1
Unit A2
ID
Question A simply supported beam AB of length L carries a point load P at the centre C. The
S.F.D. between A and C is ___________.
A horizontal straight line
B inclined straight line
C parabola
D third degree curve
Answer A
Marks 1
Unit A2
ID
Question A simply supported beam AB of length L carries a point load P at the centre C. The
B.M.D. between A and C is ___________.
A horizontal straight line
B inclined straight line with positive
slope
C inclined straight line with negative
slope
D parabola
Answer B
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
D 2M/L
Answer A
Marks 1
Unit A2
ID
D 2M
Answer B
Marks 1
Unit A2
ID
Marks 1
Unit A2
ID
Marks 1
Unit A2