Professional Documents
Culture Documents
Resume of MR - Sontaya P.
Resume of MR - Sontaya P.
SONTAYA POJID
PERSONAL INFORMATION
Experience Summary
More than 12 years for verification/review of material receiving inspection comply
certificate, Qualification of welding procedures, Qualification/certified of welder and welding
operator for construction project, ensuring for fabrication, erection, dimensional are conform
with DWG. Welding sequence control such as joint configuration before weld, maintain
quality during weld, ensure visually after welded. Monitor PWHT/ Hardness test. PMI for
material identification and consumable. Maintain for NDE and preparation percentage.
Radiographic interpretation with reference code. By reject result supervise for repair until
acceptable. Preparation of test package and release for inspection, punch clearing and
hydrostatic/pressure test. Present for final and packing list until material release for shipping.
The last step review for MDR and handover to owner
Professional Qualification Certificates
- Certified Welding Inspector (CWI) examination process
- CSWIP Welding Inspector - Level 2 (CSWIP 3.1 Cert. No. 77175/2) Expiry 9 June
2023
- Radiographic Testing Level II (Cert. No. 813-15-1056) Expiry 16 May 2020
- Magnetic Particle Testing Level II (Cert. No. DP-MT-12064) Expiry 14 April 2017
- Liquid Penetrant Testing Level II (Cert. No. DP-PT-12066) Expiry 14 April 2017
- Visual Testing Level II (Cert. No. DP-VT-12016) Expiry 4 June 2017
- ISO 9001:2008 Internal Quality Audit (Cert No. QIS/ISO-2880)
- Occupational safety in confined areas for authorized entrant
EDUCATION HISTORY
From2004 – 2008 University of Naresuan, Phitsanulok THAILAND
Bachelor of Physics – Electronic.
From1998 – 2004 Prachasongkroe High School, Phitsanulok THAILAND
High School Certificate
SKILL
- Good command of Written and Spoken English
- Proficient in Microsoft Word, Internet, Email
- Can use for Auto CAD program for use make dimension report
- Typing skills: Thai, 28 words per minute | English, 28 words per minute
WORK EXPEREINCE
Jan 2021 to Present
Position : Welding Inspector
Company : QMTS (Quality Management Technical Services)
Project : K80-Gudai-Darri (Koodaideri) Project phase 1
Job Description and responsibility
- Coordinate with Sub-contractor and owner’s representative.
- Material inspection (quantity, visual, dimension verification) together with review
certificate and endorse as per project specification and Australia standard code.
- Witness and review Welding procedure specification (WPS), Procedure qualification
record (PQR) and mechanical test
- Witness for the welder qualification test and review card test and certification before
sent to owner approve.
- Witness / Review of Fabrication (Fit-up, Visual), dimensional, NDE, before release to
paint.
- Monitor welder and welding parameter activity as per WPS.
- Review and verified completeness of structural packages (welding history, percent NDE,
other report) prior sent to owner review.
- Fit up inspection, control welding process and control heat input (record volt, amp,
travel speed and Temp.) as per welding procedure specification.
- Visual inspection after weld, control NDE (UT and MT) as per project specification.
- Preparation and review document before summit to Client approve.
- Inspection for fit up, visual, dimension include prepare report and issue RFI to owner
inspection and review.
- Monitor welder and welding parameter activity as per WPS.
- Coordinate team of nondestructive testing company for test NDE.