Professional Documents
Culture Documents
Md Firdous
E-mail: mfirdous85@gmail.com
Mobile : + 91-9082642474
+91-9905624599
BRIEF SUMMARY
Four (4) year's experience in the field of Execution, Qa/Qc, supervision and erection of
Piping and Inspection of static equipment at Shop & plant .Having experience handling the
manpower, material welding, NDT, PWHT, PMI, , hydro test / pneumatic test, familiar with
ASME codes.
EDUCATIONAL QUALIFICTION:
Bachelor of Technology in Mechanical Engineering, with First class from JNTU, Hyderabad,
India.
PROFESSIONAL QUALIFICATION:-
Reviewing of project related drawings, Scope of work, inspection & test plan (ITP),
checking the materials, Planning & scheduling of inspections as per approved ITP.
Inspection of incoming materials – check dimensions, heat number, ovality, color
code etc.
Handle the manpower and co-ordinate with departmentle staff.
Directly Conduct with project team.
Monitoring materials and completely focous on progress with Best Quality and Safety
As per plane basis try to get target with before.
Coordinate with as given gang and work plane out with given target period.
To observe and monitor the implementation of inspection and test plan (ITP) with
regard to welding related activities in Fabrication Shop and at site.
Check-up of Material test certificate (MTC’S) of all received materials and welding
consumables at site.
Responsible for QA/QC Site implementation, inspection & testing of
equipment A/G (Above ground) piping utilities.
Conduct stage wise inspection as per ITP and prepare the stage wise inspection
reports to get clearance from TPI.
Review the preliminary WPS as per applicable test code and to carry out the PQR.
Inspecting joint fit up, includes root face, root gap, bevel angle, weld visual &
dimension accuracy as per ASME codes.
Monitoring pre heating, post heating, post weld heat treatment (PWHT), PMI
verification, Hardness testing as per isometric.
Review of NDT reports and sign off by client.
Perform inspection of piping for leveling & alignment (Verticality & Horizontality) .
Monitoring of Fabrication the piping spool as per Isometric drawing.
Utilization of material as per specification and standards (Pipe, fitting, bolts, gasket)
Monitor and control of the piping spool dimension and orientation as per Isometric.
Inspection of spool fabrication – alignment, dimension check, material as per drawing,
joint fit up etc.
Inspection of fabricated pipe spool dimension & orientation as per isometric.
Inspection of fabricated spool prior to NDE.
Monitoring the testing (PT/UT/RT/MT) of completeness of spool.
Responsible to review & check the Test Pack, ITP, RFI.
Inspection of static equipments, piping and structures etc.
Witness of hydro test and pneumatic (Air) bubble test at different pressure.
Inspection of pressure test (hydro test, pneumatic) according to piping class, their test
limit and required pressure along with P & ID and LDT Review the pressure test
package and procedure documents of test conduct.
Mechanical clearance loop as per P&ID and isometric, punch point.
Preparing punch list installation check and assure that all joints are exposed for
examination during pressure test.
Ensure that the exceptional punch list items for Mechanical completion certification
are complete.
Conduct surveillance of on- going construction activities of NDE task.
Conduct daily TBT, weekly quality reports.
Control all the quality and billing documents.( FWV, Spool Erection, Alignment, valve,
Supports, NDT, WQC, Parameters, Measurement sheet , Abstract, TI)
To prepare Measurement RA-Bill & review.
Certify the RA-Bill from clients and take the clearance as per required departments
(Mechanical, HSE, HR, Costing, Civil & Electrical).
PERSONAL PROFILE: