Professional Documents
Culture Documents
PEDASINGU
Phone:+971 55 331 5982 LinkedIn: Pedasinu Trimurtulu
E-Mail: murthy.mech330@gmail.com Skype: murthycool1
Acknowledged for strengthening companies to lead in highly competitive situations, targeting assignments in Quality
Assurance & Control with an organisation of high repute in Oil & Gas industry
PROFILE SUMMARY
Qualitative experience of over 6 years in QA/QC and Operational Excellence in Oil & Gas, Piping, Marine and
Industrial Projects; certified Welding and Coating Inspector, QMS Lead Auditor 9001:2015
PDO (Petroleum Development Oman) Approved QC Inspector
Expertise at identifying the areas of obstruction and taking proactive measurement to rectify and implement
corrective measures for process enhancement
Exhibited a strong and firm approach in ensuring statutory compliances under ISO, ITP, SSPC, ASME and NACE
standards; liaised with manufacturers to conduct successful inspections
Proven skills in sustaining and encouraging safe work environments; capabilities to streamline operations;
applied continuous improvement principles to increase process & maintenance efficiency
Resourceful in conducting inspection for various processes and checking the quality standards to ensure the
processes are in accordance with guidelines and regulations
Formulated "Quality Assurance Plan", "Inspection & Test Plan" to ensure the products are manufactured with
lowest possible failure rate
Skilled in Non-Destructive Testing, Welding Engineering, Painting/Coating Department; expertise in conducting,
Welding Inspection, Dimension & Visual Inspection, Dimensional Check of completed Weldment, Blasting Inspection
and Adhesion Test
Attended project quality & safety audit and made close-out reports; experienced in preparing Hydrostatic Test
Package
Successfully performed inspection and verification of both in-process and completed work activities, including
witnessing construction/performance testing performed by construction or contractors; performed internal and
external inspections to determine if a weldment meets the acceptance
Conducted NDT activities, performed/witnessed MPT, DPT and UT
Insightful knowledge of testing quality of welding consumables (electrodes, filler wires, consumable inserts, gases and
fluxes), Dimensions, Fit-up & Weld preparations and inspection of Painting & Coating consumables
Acknowledged with ‘Best Employee of the Month’ award in August 2017 for at par expectation performance in QC
operations at BERG Engineering, Ras-Al-Khaima, UAE
Spearheaded a team of 10 members; delivered to training new joiners in BERG Engineering, Ras-Al-Khaima, UAE
CORE COMPETENCIES
Quality Assurance & Control Resource & Cost Optimization Audit & Compliances
Process Improvement Client Relationship Management Risk Mitigation & Management
EHS Operations Non Destructive Testing Welding and Painting Inspections
Review EPC Contractors and subcontractors Project Quality Assurance Plan / Specification requirements.
To carry out inspection and report to QA/QC manager.
Application of the requirements of codes and standards.
Parent material identity
Verification against documentation and markings of correctness of parent material.
Welding consumables identity.
Verification of correctness of welding consumables (electrodes, filler wires, consumable inert gases, fluxes etc.).
Verification that dimensions, fit-up and weld preparations are in accordance with the engineering drawings.
Preheating, Verification that pre-heat (where required) is in accordance with specified procedures.
Post welds visual inspection.
Visual inspection and dimensional check of completed weldment against specification requirements and drawings.
Welder approvals, Verification that adequate and valid welder approvals are available, and that only approved welders
as required are used in production.
Verification that post weld heat treatment has been conducted in accordance with specification requirements.
In-process welding surveillance, Surveillance during welding to verify compliance with specified procedure including
any preheat, inter pass temperature control and post heat requirements.
Witnessing of welder and procedure approval tests.
Performing Inspection of raw materials correlated with Test Certificates as per ITP.
Coordinating the NDT activities.
Interpretation of radiography films in accordance with the codes.
Performing MPT, DPT and UT.
Preparing weld summary as per the approved drawings.
Hydrostatic test package, witness and monitoring.
Pickling & passivation for stainless steel monitoring accordance standard codes.
Performing Positive Material Identification.
Inspection of Rubber lining as per approved procedure.
During rubber ling inspection, performing spark test, rubber hardness in shore A and D, rubber thickness & pull off test
on sample specimen.
During painting inspection, performing pull off test for three coating system & less than 250 microns x-cut method (as
per client requirements), salt test, profile test, dust test, rub test for inorganic paint systems, low and high voltages
holiday test. All test conducting as per required specifications.
Inspection of Galvanizing as per approved procedure.
Galvanizing inspection as per ISO & ASTM standards.
Inspection of Painting as per approved procedure.
Performing Painting inspection as SSPC, NACE & ISO standards.
Calibrating internal measuring & inspection instruments as per Quality Assurance Procedure Periodically
Preparing Final Dossier as per the client’s requirement (Piping systems, structures and field erected tanks).
Pre-Dispatch inspection with Clients.
Anchoring on-site project activities and overseeing the performance of sub-contractors,
Ensuring compliance with quality assurance plans.
ORGANISATIONAL EXPERIENCE
Dec’20 – till date: Interface technical inspection services,UAE as QA/QC Inspector (coating/welding)
Key Result Areas:
Managing painting/coating inspection of steel structural works, pipeline, pressure vessels; performing stage wise and
finish painting/coating inspection
Analyzing and monitoring weather condition for surface preparation and painting/coating application as per ISO;
prepared “Inspection & Test Plan” (ITP) for specific requirements
Ensuring all final products are in accordance with company procedure, client requirement and international codes
Performing incoming coating/painting material inspection; ensuring that these materials suit to meet the requirements
of project specifications
Acquiring inspection report of paint as per PO and approved painting guidelines; checking mixing ration, expiry dates of
the Paint Batch Certificates
Executing dimension & visual inspection tests and procedures for construction drawings; performing welding
inspections pertaining to approved WPS and Weld Map
Conducting blasting inspections & adhesion test as per approved ITP and international standards
Conducting the inspections as third-party
Review WPS, PQR and Welding performance report
Monitoring and Maintains Welder Continuity Log
Supervise fabrication shop and field welding quality
Coordinates and supervises site NDE and PWHT activities
Interprete welding query compliance with ASME, & AWS Codes/Specification
In process inspection/verification (Welding parameter, welder qualification, consumable, equipment’s calibration)
PREVIOUS EXPERIENCE
Feb’20 – May’20: Gulf Centre Engineering Equipment’s LLC, Kuwait as QC Inspector (Coating)
Sep’18 – Dec’19: Zawawi Powertech Engineering LLC, Oman as QC Inspector (Coating/Welding)
Onsite Location: Lekhwair Combine Cycle Power Station Project(EPC)
Feb’18– Aug’18: Paramount Enterprises,India as QA/QC Inspector (Coating/Welding)
Nov’16 – Dec’17: BERG Engineering, Ras-Al-Khaima, UAE as QA/QC Inspector (Coating/Welding)
Aug’15 – Sep’16: Alshabia Engineering Co.Ltd., Sharjah, UAE as QA/QC Inspector (Coating/Welding)
Jun’14– Jul’15: Tarini Steel Co. Ltd., India as QA/QC Inspector
CERTIFICATIONS
Certified Welding Inspector CSWIP 3.1 from TWI, UK in 2018
Certified Coating Inspector BGAS Grade 2 from TWI, UK in 2015
Received certification in LA 9001:2015 Quality management system from TVE CERT(IRCA) in 2019
Certified ASNT Level II Inspector from SIS, Vishakhapatnam, Andhra Pradesh in 2014 in
o Liquid Penetrant Test (PT)
o Magnetic Particle Testing (MPT)
o Ultrasonic Testing (UT)
o Radiographic Testing (RT)
ACADEMIC DETAILS
2014: Bachelor of Technology in Mechanical Engineering from JNT University, Andhra Pradesh, India with 61%
2010: 12th from Narayana Junior College, Andhra Pradesh, India with 75%
TECHNICAL SKILLS
PERSONAL DETAILS
Annexure
Organization: Zawawi Powertech Engineering LLC, Oman