Professional Documents
Culture Documents
Content
1 ODN Overview
3 Key Features
1
ODN Architecture
ODN is the optical distribution network between OLT and ONT, it is the part of FTTx network
ONT
OLT
Central Office Feeder Section Distribution Section Drop Section
Splicing connection
splitting
Straight-through
Branching (splicing)
Closure Branching (distribution)
3
Network Location of Closure
FDT: User
Support Aerial cable Closure in pole
splitting
ODF
The user access point is also a level-two splitting point. The closure should have the function of
splitting, distribution, and outputting the drop cables.
Branching point in a community: Optical cables are distributed to each building or area.
Therefore, branching holes in the closure must be sufficient.
4
FDT Overview
Overview
The fiber distribution terminal (FDT) is a device for connecting feeder cables and distribution cables,
to protect optical fiber splicing points, distribute and schedule optical fiber routings. FDT are often
outdoor type.
FDT is called fiber distribution hub (FDH) in North America, street cabinet in Europe, and optical
distribution cabinet (ODC) in Middle East.
5
Huawei FDT
Splicing and distribution tray
Modular design. The splicing tray and splicing
and distribution tray are installed in modules.
Optical splitter
Parking Zone
Effectively manage unused optical fibers, protect connectors of
unused optical fibers, and reduce accidental damage rates of optical fibers
Splicing tray
Can be installed with the
The top of the FDT sunshade to prevent operators
uses gradient design from sunlight.
and is waterproof.
Huawei
FDT Provides operation
platform`, which
facilitates splicing.
Fiber access terminal (FAT) is normally located at the user access point to connect distribution
cables and drop cables. In FTTx network, FAT work with the optical splitter to split optical fibers.
FAT is called fiber distribution hub (FDH) in North America, floor box in Europe, floor distributor (FD)
in the Asia Pacific zone, and optical distribution box (ODP) in Middle East.
7
Full Series of Product meet different scenarios
Scenario Installation
•Installed on a pole
• High buildings
• Middle and •Installed on a wall
low buildings
FAT
Capacity Function
• 6 core • Optical splitting
• 12 core • Direct splicing
• 18 core • Distribution
• 24 core • Straight-through
• 36 core
8
ATB Overview
Overview
The access terminal box (ATB). Its major functions are terminated drop cables and providing optical ports.
ATB is the home equipment of FTTH, despite having the functions of the optical fiber panel, ATB also
should be beautiful,
9
Huawei State-of-the-art Designed ATB
State of the art design
Rotatable plate make sure the patch cord
cannot be pulled out by accident
The Red Dot Award, which is origined in
Germany, is known as the Oscar Award in
the industry design.
ONT port
Innovative design:
Compact box with ONT integration
Layered design makes operation easier.
Wall mounted and without visible ventilation
holes
10
Content
1 ODN Overview
3 Key Features
11
The Biggest Challenges in building cabling
Slow Deployment Home Wiring is Difficult
On site install Vertical cabling Limited space Hard for home cabling Splicing at home
Low efficiency in fiber splicing and equipment Home wiring takes half of ODN investment. (50%×56%
installation on site. (STC: 10 persons/day for one of FTTH)
FDT(576 core) ) Difficult to get the permission to enter the home.
Hard to do cabling inside buildings. (Old buildings, Several times to finish the indoor engineering. (6 hours
congested ducts) .(TdE) needed in Malaysia Maxis).
Low efficiency in service provisioning.(TdE: Need Dirt and long interruption in user’s house for splicing.(2
10 days/per user) hours in Telefonica)
12
Different Scenarios
14
Pre-connected Indoor FDB -- Deployed with Subscriber growing
Compact design with full
Splicing Tray For 1 subscriber only Splitter module Cover functionality: splicing, splitting and
distribution
Small size (142x145x56mm) which
allows installation within small
spaces
Absolutely modular design allows
PAYG deployment
15
Scenario 2 : Old Residential Building
Outside solution
Technical
needed(IP65,IP68)
requirements
Drop cable should be strong
FAT enough
All scenarios needed(pole , wall
Big capacity to cover as many as
subscribers
Closure in Beautiful, state of the art box
manhole
16
Pre-connected outdoor FAT
Design
Small Size (360x240x120mm)
Multi Function design (Splice, splitting, drop
distribution)
Splitting 1:4/1:8 //1:16 inside
Sealing Rate: IP65
Plug & Play with SC/APC outdoor Connectors
17
Pre-connected Drop Cable for Easy and Fast Connection
dust cap for connector
SC connector
(from splitter)
18
Scenario 3 : Villa or Residential Building
Scenario description
Technical requirements
Outside solution needed(IP65,IP68)
Drop cable should be strong enough
All scenarios needed(pole , wall ,
manhole)
Better to use aerial solution
Full series of boxes, small in size
Beautiful, state of the art box
19
Aerial Solutions For Houses & Small Buildings
FAT
Pole-mounted Distribution
Box Cable
SPL 1:8 Pole-mounted
Box
Drop Cable
External
Study Room Bed Room
drop cable
Pole-mounted
Box
Drop Cable
Closure
SPL 1:8
T ATB ONT
B
Distribution
Living Room
Cable
Indoor
drop cable
Closures
20
Pre-connected Closure - SSC2133T
Pole/wire mounted , easy installation
Mechanical sealed, easy O&M
Special strain-relief design for drop cable
protection
Support flat drop cable(2x3mm,2x5mm) or
common optical cable(Φ7.0mm~Φ20mm)
Composite PP+GF material with longer
service life
Comply with ROHS and UL94–HB
SSC2133T-Product Specifications
Dimension(HxWxD) 337 x 208 x 120 mm Color black
Split Ratio 1:4/1:8/1:16 Working temperature –40℃~+60℃
Max. Quantity of Splitter 2 Storage temperature –40℃~+70℃
No. of subscriber ports 16 Humidity (RH) ≤93%(+40℃)
Splicing Capacity 24 Messenger Wire diameter (mm) Φ5~Φ10
Common cable hole
Φ7.0mm~Φ20mm Air pressure (Kappa) 70~106
diameter
Drop cable 2x3mm Fireproof level UL94 HB
Installation Aerial Protection class IP54
21
Content
1 ODN Overview
3 Key Features
22
Huawei ODN Product Design
Stable & Reliable Economic and Cost effective
35 min 6 min
Splicing Pre-connectorized TCO Saving
Expertise decline
Splicing Pre-connected
24
End-to-End Products
ODF Closure FDT FAT FDB CTB/ATB
CTB2101
Pre-connected FAT FDB for splicing
SSC2101-FM
FDT2106D-288/576
ODF2115
ATB3201
FDT2103D-144/72
25
Global FTTx-ODN Applications
Telefonica,FT,TI,BT, Turkmen telecom, SOL, China Telecom, China
ME STC, ET,Q.NBN, ITPC,
EU SFR,DT CIS Rostelecom China Unicom, China Mobile
NA DU, Qtel
Selected by 60 Operators(Telefonica,
BT, FT, Etisalat, STC etc).
National band Network project in
Qatar, New Zealand,Malaysia and
Cameroon.
26
HUAWEI ENTERPRISE ICT SOLUTIONS A BETTER WAY