Professional Documents
Culture Documents
JDVP | Section E
Trainer: Mr. Rodolfo C. Idio Jr.
Date Answered: March 10, 2021
Institutional Assessment
A. Give the meaning of the following acronyms:
1. BIOS – Basic Input/Output System
2. LAN – Local Area Network
3. MAN – Metropolitan Area Network
4. WAN- Wide Area Network
5. OS- Operating System
6. RJ- Registered Jack
7. UTP- Unshielded Twisted Pair
8. STP - Shielded Twisted-pair
9. ADDS- Active Directory Domain Services
10. DNS - Domain name system
11. DHCP- Dynamic Host Configuration Protocol
12. OU - Organizational Unit
13. GPO – Group Policy Objects
• IP addressing server pc
• Change computer name to server
• Install and configure ADDS
• Configure DNS
• Install and configure DHCP
• Install and configure File Server
• Create Students folder to D:\
• Share Students folder to domain users
• Create File Screen
• Create Organizational Unit
• Create Group Policy Object
• Set-up folder redirection
• Create user accounts
• Join client pc to server
C. Create your own step by step guide in setting-up computer server.
Write down below the list of instructions on how will you perform
every tasks in installing and configuration of windows server
2008.
1. IP addressing server pc
a) Open Network and Sharing Center
b) Open Local Area Connection Properties
c) Disable IPv6 Address
e)
f) Click OK and close all windows
2. Change computer name to server
a.) Access the Computer Properties
b.) Click the Change Settings and then click the computer name tab then click change
c.) Change the computer name to LOYOLAFAM
D.) Then it will pop out said “You may restart your computer to apply
changes”
c.) Right click on the reverse look up zone> then click the new zone
h.) The next double click the new reverse lookup zone
j.) Edit the correct Host IP Address and Host Name of the DNS Server
k.) Click ok
l.) Then check the DNS LOOKUP
m.) Right click the LOYOLA FAM then launch nslookup
n.) You should see this results or repeat the whole process or if not valid
you are going to return to task 1
o.) The close all windows to finish
- Click Next until IPV4 DNS Settings and Validate DNS server/ if not valid
return to task 2. If it is valid you may click next and proceed.
- You will click next and finish then the DHCP server will be
installed it should be look like this
-
- Check the address pool, in order to work pool must exist
-
- Finish
-
7. Create Students folder to D:\
-
- Create a folder into Users named Loyola.
7.
8. Click OK and create
9. Don’t let the computer create a template
10.Create Organizational Unit
a. Click Start> Administration Tools> Active Directory Users and
Computers
b. Create new organizational unit from the current domain networking.local
c. Then name the new organizational unit as Loyola and protect it from
deletion.
Then click ok
d. Minimize the active directory and you will open the group policy
management
f. You will click start administrative tools group policy management
b. Name the new GPO as ( you can name it according to what you want)
c. Click the new gpo to activate its console
d. Edit the new gpo
1.
2. Expand your domain (networking.local) then right click on students to create
new user
3. Set the name of the users and provide their username also their password
13. Join client pc to server
- On window 7 client pc access computer properties then change settings
- click change button on computer name tab to access domain and workgroups
settings
- and you can join your existing domain by entering your domain in domain section
- LOGON maybe or will required to continue joining to this new domain then your
computer will ask you to restart to apply the several changes
-Then after the restarting you may click switch user that you have created in the
server
-Then finally check the redirected folders. Finish