Professional Documents
Culture Documents
DGMFN-3-41
Model Code
1 2 3 4 5 6 7 8
1 Direction of flow control (with 3 Type of control needle/orifice 6 Type of control needle/orifice
respect to machine actuator) (single model or first line of dual (second line of dual models)
X – Meter-in control, applicable to lines model) Options as in 3
A and B 1 – Fine control Omit for single models
Y – Meter-out control, applicable to 2 – Standard control
lines A and B
Z – Meter-in control, line P only and 7 Adjuster type (second line of dual
meter-out control, line T only. 4 Adjuster type (single model or models)
first line of dual model) Options as in 4
H – Handknob Omit for single models
2 Location of control function W – Screw/locknut
(single model or first line of
dual model) 8 Design number, 41 series
P – Line P (single model only) 5 Control in second line Subject to change. Installation
T – Line T (single model only) B – Line B (use for dual models with dimensions unaltered for design
A – Line A (single model or first line of “A” specified at 2 ) numbers 40 to 49 inclusive.
dual model) Omit for single models
B – Line B (single model only) M
DGMFN-3-X-A**-B** DGMFN-3-Y-A**-B**
P T B A P T B A
DGMFN-3-X-A**-B** DGMFN-3-Y-A**-B**
P T B A P T B A
DGMFN-3-Z-P** DGMFN-3-Z-T**
P T B A P T B A
DGMFN-3-Z-P** DGMFN-3-Z-T**
P T B A P T B A
Operational Data
Maximum flow rate 60 L/min (16 USgpm)
Maximum operating pressure 315 bar (4500 psi)
Pressure drops See graphs
Mounting position Optional
Mass approximate 1.1 kg (2.2 lb)
Performance Characteristics
Pressure Drop
Typical performance with mineral oil at 21 cSt (102 SUS) and at 50º C(122º F)
Type “1” needle (see model codes 3 and 6 ) Type “2” needle (see model codes 3 and 6 )
psi bar Number of turns of adjuster psi bar Number of turns of adjuster
60 60
800 1 2 3 4 5 6 800 1 2 3 4
50 50
600 40 600 40
Pressure drop
Pressure drop
30 30
400 400 5
20 20
6
200 200
10 10
0 0
0 10 20 30 40 50 60 L/min
M 0 10 20 30 40 50 60 L/min
0 4 8 12 16 USgpm 0 4 8 12 16 USgpm
Flow rate Flow rate
8
100
6
50 4
2
0
0 10 20 30 40 50 60 L/min
0 4 8 12 16 USgpm
For other viscosities see “Further Information”.
Flow rate
DGMFN-3-X-***(-***)-41
DGMFN-3-Y-***(-***)-41
DGMFN-3-Z-***-41
Models with type W adjuster
To adjust valve setting, slacken off locknut and turn screw
Re-tighten locknut after completing adjustment.
T T
A A
B B
P 4 ( 5 /32 ) A/F hex. socket P
A max. D max.
47 (1.85)
B max.
max.
40
(1.57)
E max. E max.
Ø3 (0.12 dia)
3,5 (0.14)
4 holes through: Ø5,3 (0.21 dia) 4 off “0” seals supplied for this interface
P
47,6 46 B
(1.87) (1.8)
A
T
39 (1.54)
45 (1.8) 76 (3)
max.
C max.