Professional Documents
Culture Documents
Date of lssue
I 1 3-FP 01 KS-0007A1 -0033
20 I
Nov., 23, 2020
25x2500x6000 PP00737006 2,943 su56875 T 425 539 33 1:285 Good L 0.1446 0.1 94 1.551 0.0094 0.0020 0.014 0.009 0.013 0.002 41 0.025 0.0127
2:295 P 0.1446 0,1 85 1.535 0.0093 0.0022 0.013 0.008 0.012 0.002 35 0.023 0.0'125
3:287
A:289
25x2500x6000 : PP00737002 2,943 su56875 T 425 539 33 Good L 0.1446 0.1 94 1.55í 0.0094 0.0020 0.014 0.009 0.013 0.002 41 0.025 0.0127
2:295 P 0.1446 0.185 1.535 0.0093 0.0022 0.013 0.008 0.012 0.002 0.023 0.0125
3:287
A:289
25x2500x6000 : PP00737008 2,943 su56875 T 425 s39 33 1:285 Good L 0.1446 0.1 94 1.551 0.0094 0.0020 0.014 0.009 0.013 0.002 41 0.025 0.0127
2:295 P 0.1446 0.185 1.535 0.0093 0.0022 0.013 0.008 0.012 0.002 0.023 0.0 1 25
3:287
A:289
25x2500x6000 3 8,829 su5687s T 442 537 31 1:271 Good L 0.1446 0.194 1.551 0-0094 0.0020 0.014 0.009 0.013 0.002 41 0.025 0.0127
2:265 P 0.1446 0.1 85 1.535 0.0093 0.0022 0.013 0.008 0.012 0.002 0.023 0.0í25
3:277
A:271
25x2500x6000 2 5,886 su56875 T 442 537 31 1:271 Good L 0.1446 0.1 94 1.551 0.0094 0.0020 0.014 0.009 0.0'13 0.002 41 0.025 0.0127
2:265 P 0.1446 0.185 1.535 0.0093 0.0022 0.013 0.008 0.012 0.002 0.023 0.0125
3:277
A:271
25x2500x6000 3 8,829 su56875 T 1:271 Good L 0.1446 0.194 1.551 0.0094 0.0020 0.014 0.009 0.013 0.002 41 0.025 0.0127
2:265 P 0.1446 0.1 85 1.535 0.0093 0.0022 0.013 0.008 0.o12 0.002 0.023 0.0125
3:277
A:271
25x2500x6000 23,544 su56876 T 430 537 1:284 Good L 0.1 493 0.1 95 1.548 0.0090 0.0024 0.018 0.007 0.011 0.002 0.024 0.o129
2: 300 P 0.1 403 0.185 1.542 0.0088 0.0022 0.017 0.007 0.011 0.002 22 0.023 0.o123
3: 303
A: 296
* Position - T : Top, M : Middle, B :
Bottom We hereby certify that the material herein has been made in accordance with the order and above specification.
* Tensile Test. Direction : Transversal,
Gauge Length : 5.65 JA. (Rectangular), This material has been fully killed and made by basic oxygen process. This material is fine grained steel.
YP Method : Upper Point This material has been made by vacuum degassing process.
* lmpact Test. Direction : Surface Longitudinal, Full-Size :
10mmX1Omm No repairwelding was performed to the products. Test Certificate is issued according to ISO í0474lEN 10204 3.1
" U.S.T : Ultrasonic Test.
"* Division - L : Ladle Analysis, P : ProductsAnalysis
Supply Condition : As-Rolled unless otherwise Heat Treated.
Legal sanction can be imposed on forging. lmproper use of product can cause safety issues.
( { oorr,"rR/MUM/121'''3/surveYor
ïo 1., Jote Qam
Kn
.
POSCO Gwangyang Works, 20-26, Pokposarang-gil, Gwangyang-si, Jeollanam-do, 57802, Korea Chief of material testing section KO JAE GON
pssco Milt -est Certificate CertiÍicate No.
Date of lssue
201 1 13-FP 01 KS-O007A1 -0033
Nov., 23, 2020
I
Product No. g. Sol-Al CEO
o
= (%) (%) (%l
hereby certify that the material herein has been made in accordance with the order and above speciÍicatio n-
This material has been fully killed and made by basic oxygen process. ïhis material ís fine grained steel.
ïhis material has been made by vacuum degassing process.
No repair welding was performed to the products. Test Certificate is issued according tolSO 104741EN '10204 3.1
Legal sanction can be imposed on forging. lmproper use of product can cause safety issues.
( {
POSCO
oorr,"rR/MUM/12.íooo3/surveYor
To
Gwangyang Works, 20-26, Pokposarang-gil, Gwangyang-si, Jeollanam-do, 57807, Korea Chief of material testing section
b t*' &u*
KO JAE GON
p0s*0 Ultra' lnic Test Report Certificate No. : 201 1 '13-FP01 KS-0007A1-0033
Date of lssue : Nov., 23, 2020
Ultrasonic Test
Product No Remarks
Examination Frequency
Method
Apparatus Transducer Sensitivity Test Result
(MHz)
PP00737006 2 H
PPOOT3ZOOZ 2 4 H 1. Application Spec.
PP00732008 2 5 H : EN10160(1999) s1/E1
PP00736801-6803 2 H
2. We hereby certity that the material
PP00736804-6805 2 5 H described herein has been examined in
PP00736806-6808 5 H accoÍdance with above ultrasonic
PP00736501-6508 2 H specification and fully conformed thereto.
* Couplant :Water
* Examínation method('1:Direct straighl Beam, 2:Direct double beam, We hereby certify that the material herein has been made in accordance with the order and above specification.
3:Others) This material has been fully killed and made by basic oxygen process. This material is fine grained steel.
- Apparatus(1 : Digital Flaw Detector, 2: Others)
*Transducer(1:1,20nn,2:(24nn,3:É25mnor2smttlsquare,4:130mm,5:8-12.5mm,9:others) This material has been made by vacuum degassing process.
No repair welding was performed to the products. Test Certificate is issued accordíng to ISO 10474lEN 10204 3.1
" Sensitivity(A:RB-D-10=50%+10D8, B:STB-N1=50%, C:STB-N1=70%, D:STB-G.V1.5a.s=50%,
E:STB-G.V1.5-a.o=80%, F:STB-G.V 1.5-2.s=50yo, G:BG=7515%, H: É s.OtlnDAC, l: I 1 I .0mmDAC,
J: é 8.0mmDAC, K:GB-T2970 Sensitivity, L:86=1667o, M: l5.0mmFBH=60%, N:Soviet 75ATM Sens.,
O:855996-93 Sens, P: l6.0mmDAC, X:Others)
" Test Result ( 1: Good, 2: Acceptable )
Legal sanction can be imposed on forging. lmproper use of product can cause safety issues.
{ €
POSCO
3fl'""tR/MUM/121ooogurveYor To