Professional Documents
Culture Documents
ELECTROCHEMISTRY
COMPILED BY :
HAZWANEE BINTI OSMAN
TS. NAJWA RAWAIDA BINTI AHMAD @ AHMAD FAUZI
CONTENT
LEARNING OBJECTIVES
Redox Reactions
Chemical Electrical
Energy Energy
4.1 REDOX REACTIONS
Redox reactions are involved the transfer of one or more electrons from
one chemical species to another called reduction-oxidation
Oxidation is loss of electron
Reduction is the gain of electron
OILRIG
Oxidation is Loss
Reduction is Gain
4.1 REDOX REACTIONS
Rule (1):
The oxidation number of any free element is 0.
Na = 0 and Cl2 = 0 [ 2Na(s) + Cl2(g) → 2NaCl(s) ]
Rule (2):
The oxidation number for any simple, monoatomic ion is equal to the charge.
Na+ = +1 and Cl- = −1 [ NaCl ]
4.1 REDOX REACTIONS
Rule (3):
a) The sum of all oxidation numbers of the atoms in a neutral molecule must
equal to zero.
Na+ = +1 and Cl- = −1 [ NaCl, (+1) + (−1) = 0 ]
b) The sum of all the oxidation numbers in a polyatomic ion must equal to the
charge on the ion.
N = +5 and O = −2 [ NO3–, (+5) + 3(−2) = −1 ]
Rule (4):
Group I metals have an oxidation state of +1 in all their compounds.
Na+ = +1 [ NaCl ]
4.1 REDOX REACTIONS
Rule (5):
Group II metals have an oxidation state of +2 in all their compounds
Mg2+ = +2 [ MgCl2 ]
Rule (6):
For hydrogen, assign the oxidation number as follows:
a) Hydrogen + non-metal covalent hydride
The oxidation number of hydrogen in these covalent
hydride is +1
Examples: HCl, H2O, NH3, H2SO3, OH– and NH4+
4.1 REDOX REACTIONS
Rule (7):
For oxygen, assign the oxidation number as follows:
a) The oxidation number of O in oxides is –2.
Examples: Na2O, BaO, H2O, Al2O3, CO2, SO3, CO32–, SO42–
b) The oxidation number of O in peroxides (O22-), superoxides
(O2-) is –1.
Example: Na2O2, BaO2, H2O2.
4.1 REDOX REACTIONS
Rule(8):
For Group VII elements, assign the oxidation number as follows:
a) Fluorine has an oxidation number of –1 in all its compounds.
b) Other halogens (Cl, Br, and I) have oxidation numbers -1 when they occur as
halide ions in their compounds.
c) When combined with oxygen, for example in oxyanions:
HClO4, ClO3–, BrO3–, ClO2– and IO3–,
the oxidation number of the halogen is positive.
EXAMPLE
What is the oxidation number for each kind of atom in the following ions and
compounds?
a) Na2SO4
b) (NH4)2S
SOLUTION
Identify the relevant concepts. Use the set of rules you just learned to assign
and calculate oxidation numbers.
a) Na2SO4
The oxidation number of each sodium ion, Na+, is the same as its ionic
charge, +1 (Rule 2).
The sum of the oxidation numbers in the neutral compound to be 0 (Rule
3a),
There are four oxygen atoms, and the oxidation number of each oxygen is
–2 (Rule 7a).
2(1) + S + 4(-2) = 0
S+2–8=0
S = +6
Therefore, the oxidation number of sulfur must be +6, because (2 × (+1)) +
(+6) + (4 × (–2)) = 0.
+1 ? –2 +1 +6 –2
Na2SO4 Na2SO4
b) (NH4)2S
Ammonium ions, NH4+, have an ionic charge of +1 (Rule 3b), so the sum of
the oxidation numbers of the atoms in the ammonium ion must be +1. Two
ammonium ions have a total charge of +2.
The oxidation number of hydrogen is +1 in this ion (Rule 6a). So, the
oxidation number of nitrogen must be –3.
N + 4(+1) = +1
N = +1 – 4
= -3
Since the compound (NH4)2S is neutral, the sum of the oxidation numbers in
the neutral compound to be 0 (Rule 3a)
2 ( -3 + 4(+1)) + S = 0
2 ( +1) + S = 0
S = -2
Therefore, sulfur must have a balancing oxidation number of –2, because
((2 ×(4× (+1)) + (–3 )) + (–2)) = 0 ? +1 –3 +1 –2
NH4 + (NH4)2S
? + 4(+1) = +1
–3 + 4(+1) = +1
CHECKPOINT 1
QUESTION 1
Consider the equation below:-
SOLUTION
Then balance the number of electrons in the two half-equations and add them
together to obtain a balanced overall equation.
Sn2+ → Sn4+ + 2e- oxidation
2Fe3+ + 2e- → 2Fe2+ reduction
Sn2+ (aq) + 2Fe3+ (aq) → Sn4+(aq) + 2Fe2+ (aq)
Step 1:
Determine oxidation number for each atoms in the substance
0 +5 +2 –3
Zn(s ) + NO3 − (aq ) → Zn2+ (aq ) + NH4+ (aq )
4.1 REDOX REACTIONS
Step 2:
0 +5 +2 –3
Zn(s ) + NO3 − (aq ) → Zn2+ (aq ) + NH4+ (aq )
Separate equation into two half-equation. Note that zinc is oxidized, and
nitrogen is reduced
Step 3:
Reduction half-equation
NO3-(aq) NH4+ (aq)
Step 4:
Balance the charge by adding electrons (e-) to the more positive side of the
equation
NO3-(aq) + 10 H+ (aq) NH4+ (aq) + 3H2O (l)
-1 + 10 = +1 + 0
+9 = +1
So, the left-hand side should add 8 electrons to make it balance with the right-
hand side
NO3-(aq) + 10 H+ (aq) + 8e- NH4+ (aq) + 3H2O (l)
.
4.1 REDOX REACTIONS
Step 5:
Combine the two half-equations.
Zn (s) Zn2+ (aq) + 2e- oxidation
NO3-(aq) + 10 H+ (aq) + 8e- NH4+ (aq) + 3H2O (l) reduction
b. Add the two half-equation (the electrons should cancel each other).
c. Simplify the overall reaction by canceling species that occur on both
sides and reducing the coefficients to the smallest whole numbers.
d. Check that the equation is balanced
NO3-(aq) + 4Zn (s) + 10 H+ (aq) NH4+ (aq) + 4Zn2+ (aq) + 3H2O (l)
Use the same steps as in acidic solution; from Step 1 to Step 3c.
4.1 REDOX REACTIONS
Step 3:
c. To balance H atoms, add H+ to other side of equation that needs
Hydrogen
d. Note the number of H+ ions in the equation. Add this number of OH−
ions to both sides of the equation.
10H2O (l)
4.1 REDOX REACTIONS
e. Simplify the equation by noting that H+ and OH− react to form H2O.
Cancel water molecules that occur on both sides.
NO3-(aq)+ 10H+(aq) + 10OH- (aq) NH4+ (aq) + 3H2O (l) + 10OH- (aq)
10H2O (l)
= 7H2O (l)
4.1 REDOX REACTIONS
Step 5:
Combine the two half-equations.
Zn (s) Zn2+ (aq) + 2e- oxidation
NO3-(aq) + 7H2O (l) + 8e- NH4+ (aq) + 10OH- (aq) reduction
b. Add the two half-equations (the electrons should cancel each other).
c. Simplify the overall reaction by canceling species that occur on both
sides and reducing the coefficients to the smallest whole numbers.
d. Check that the equation is balanced.
OR,
To simplify the steps for basic solution, follow Step 1 until Step 5 for acidic
solution,
4Zn (s) 4Zn2+ (aq) + 8e- oxidation
NO3-(aq) + 10 H+ (aq) + 8e- NH4+ (aq) + 3H2O (l) reduction
NO3-(aq) + 4Zn (s) + 10 H+ (aq) NH4+ (aq) + 4Zn2+ (aq) + 3H2O (l)
Simplify the equation by noting that H+ and OH− react to form H2O. Cancel
water molecules that occur on both sides.
NO3-(aq) + 7H2O (l) + 4Zn (s) NH4+ (aq) + 4Zn2+ (aq) + 10OH- (aq)
Write a balanced net ionic equation showing the oxidation of Fe2+ ions by
dichromate ions (Cr2O72-) in a basic medium.
LEARNING OBJECTIVES
a) Half Cell
A half cell is made by filling a vessel with solution of ion and electrode.
Example: one half cell consist of a zinc electrode immersed in zinc sulfate
solution and the other half cell consist of copper electrode immersed in
copper sulfate solution.
The two-half cell are connected by a salt-bridge.
b) Salt Bridge
The salt bridge completes the electrical circuit and allows ions to flow
through both half-cells.
The flow of ions within the salt bridge neutralizes this charge buildup,
allowing reaction to continue.
A salt bridge contains non-reacting cations and anions, often K+ and NO3-,
dissolved in a gel.
4.2 GALVANIC CELL
As Cu is oxidized at the anode, Cu2+ ions are formed and enter the solution.
Ag+ ions leave solution to be reduced at the cathode.
The anion NO3- , neutral the excess positive charge from the anode, and K+
neutral the excess negative charge from the cathode.
4.2 GALVANIC CELL
c) Electrode
Commonly, the anode is made of the metal that is oxidized and the cathode
is made of the same metal as is produced by the reduction.
However, if the redox reaction involved the oxidation or reduction of an ion
to a different oxidation state, or oxidation or reduction of a gas, inert
electrode is used.
Inert electrode such as Platinum (Pt) or Graphite (C).
From the given figure, since the half-reaction involves reducing the Mn
oxidation state from +7 to +2, thus, we use an electrode that will provide a
surface for the electron transfer without reacting with the MnO4−.
Platinum works
well because it is
extremely
nonreactive and
conducts
electricity.
Salt
Anode Bridge Cathode ABC
Sketch and label a galvanic/voltaic cell in which one half-cell has Ag(s)
immersed in 1 M AgNO3, and the other half-cell has a Pt electrode immersed in
1 M Cr(NO3)2 . Write the two half-equations and cell notation.
SOLUTION
e− → e− →
e− →
e− →
salt
bridge
anode = Pt cathode = Ag
Cr2+,Cr3+ Ag+
Write redox equations from cell notation then sketch the galvanic cell diagram.
SOLUTION
e− →
salt
Cr- bridge Ag+
anode = Zn cathode = Cu
Zn2+ Cu2+
ox: Zn(s) Zn2+ (aq) + 2e- red: Cu2+ (aq) + 2e- Cu(s)
Sketch the galvanic/voltaic cell represented by the following notation and write
the overall balanced equation for the reaction.
e− → e− →
e− →
e− →
H2
salt
bridge
anode = Pt cathode = Cu
H+ Cu2+
Write redox equation from the galvanic cell diagram and write the cell notation.
4.3 STANDARD ELECTRODE POTENTIAL AND CELL
POTENTIAL
LEARNING OBJECTIVES
The reverse reaction, where Mg2+ remove electrons from the atoms of the
metal and get deposited as neutral atoms. This make the metal positively
charged
Mg2+(aq) + 2e- → Mg(s)
Photo source: https://www.chemguide.co.uk/physical/redoxeqia/introduction.html
4.3 STANDARD ELECTRODE POTENTIAL AND CELL
POTENTIAL
• Dynamic equilibrium will be established when the rate at which ions are
leaving the surface is exactly equal to the rate at which they are joining it
again.
• When the half-cells are connected, the electrons flow from the electrode
with more negative charge (greater potential energy) to the electrode
with more positive charge (less potential energy)
4.3 STANDARD ELECTRODE POTENTIAL AND CELL
POTENTIAL
4.3.1 Standard Electrode Potential
Photo source: Chemistry: A Molecular Approach by Tro, Nivaldo J.2008 Pearson education
4.3 STANDARD ELECTRODE POTENTIAL AND CELL
POTENTIAL
4.3.2 Standard Hydrogen Electrode (SHE)
2e-
Eo cell = Eocathode – Eo anode
Eo anode = - 0.76 V
2e-
Eo cell = Eocathode – Eo anode
• Cell potential results from the difference in the electrical potentials for each
electrode.
4.3 STANDARD ELECTRODE POTENTIAL AND CELL
POTENTIAL
4.3.3 Standard Reduction Potential
Standard Electrode (Reduction) Potentials in Aqueous Solution at 25°C
Cathode (Reduction)
Reduction potential is Half-Reaction
Standard Potential,E° (volts)
Table source: General Chemistry 9th Edition. Darrell D.Ebbing and Steven D. Gammon. 2009 Cengage Learning.
4.3 STANDARD ELECTRODE POTENTIAL AND CELL
POTENTIAL
The more positive the E° value, the stronger the oxidizing agent
The more negative E° value , the stronger the reducing agent
The strength of Zn as reducing agent is -0.76 V and the strength of Zn2+ as
oxidizing agent is -0.76 V.* Note that the value used is similar as we are using
reduction potential based on SRP Table – without reversing to the oxidation
equation.
Therefore Zn is a strong reducing agent while Zn2+ is a weak oxidizing agent
EXAMPLE
SOLUTION
Cu2+ is a stronger oxidizing agent because it has more positive potential
value
4.3 STANDARD ELECTRODE POTENTIAL AND CELL
POTENTIAL
4.3.4 Strengths Of Oxidizing And Reducing Agents
Standard Electrode (Reduction) Potentials in Aqueous Solution at 25°C
Cathode (Reduction)
Standard Potential,E° (volts)
Half-Reaction
Li+(aq) + e- ⇋ Li(s) -3.04
K+(aq) + e- ⇋ K(s) -2.92
Ca2+(aq) + 2e- ⇋ Ca(s) -2.76
Weaker oxidizing Stronger
Na+(aq) + e- ⇋ Na(s) -2.71
agent Mg2+(aq) + 2e- ⇋ Mg(s) -2.38
reducing
Al3+(aq) + 3e- ⇋ Al(s) -1.66 agent/ Higher
2H2O(l) + 2e- ⇋ H2(g) + 2OH-(aq) -0.83 tendency to
Zn2+(aq) + 2e- ⇋ Zn(s) -0.76 oxidised
Cr3+(aq) + 3e- ⇋ Cr(s) -0.74
Fe2+(aq) + 2e- ⇋ Fe(s) -0.41
Cd2+(aq) + 2e- ⇋ Cd(s) -0.40
Ni2+(aq) + 2e- ⇋ Ni(s) -0.23
Sn2+(aq) + 2e- ⇋ Sn(s) -0.14
Pb2+(aq) + 2e- ⇋ Pb(s) -0.13
Fe3+(aq) + 3e- ⇋ Fe(s) -0.04
2H+(aq) + 2e- ⇋ H2(g) 0.00
Sn4+(aq) + 2e- ⇋ Sn2+(aq) 0.15
Cu2+(aq) + e- ⇋ Cu+(aq) 0.16
ClO4-(aq) + H2O(l) + 2e- ⇋ ClO3-(aq) + 2OH-(aq) 0.17
AgCl(s) + e- ⇋ Ag(s) + Cl-(aq) 0.22
Cu2+(aq) + 2e- ⇋ Cu(s) 0.34
ClO3-(aq) + H2O(l) + 2e- -> ClO2-(aq) + 2OH-(aq) 0.35
Table source: General Chemistry 9th Edition. Darrell D.Ebbing and Steven D. Gammon. 2009 Cengage Learning.
4.3 STANDARD ELECTRODE POTENTIAL AND CELL
POTENTIAL
4.3.4 Strengths Of Oxidizing And Reducing Agents
Standard Electrode (Reduction) Potentials in Aqueous Solution at 25°C
Cathode (Reduction)
Standard Potential,E° (volts)
Half-Reaction
IO-(aq) + H2O(l) + 2e- ⇋ I-(aq) + 2OH-(aq) 0.49
Cu+(aq) + e- ⇋ Cu(s) 0.52
I2(s) + 2e- ⇋ 2I-(aq) 0.54
ClO2-(aq) + H2O(l) + 2e- ⇋ ClO-(aq) + 2OH-(aq) 0.59
Fe3+(aq) + e- ⇋ Fe2+(aq) 0.77
Hg22+(aq) + 2e- -> 2Hg(l) 0.80
Ag+(aq) + e- ⇋ Ag(s) 0.80
Hg2+(aq) + 2e- -> Hg(l) 0.85
ClO-(aq) + H2O(l) + 2e- ⇋ Cl-(aq) + 2OH-(aq) 0.90
2Hg2+(aq) + 2e- ⇋ Hg22+(aq) 0.90
NO3-(aq) + 4H+(aq) + 3e- ⇋ NO(g) + 2H2O(l) 0.96
Br2(l) + 2e- ⇋ 2Br-(aq) 1.07
O2(g) + 4H+(aq) + 4e- ⇋ 2H2O(l) 1.23
Cr2O72-(aq) + 14H+(aq) + 6e- ⇋ 2Cr3+(aq) + 7H2O(l) 1.33
Cl2(g) + 2e- ⇋ 2Cl-(aq) 1.36
Stronger Ce4+(aq) + e- ⇋ Ce3+(aq) 1.44
MnO4-(aq) + 8H+(aq) + 5e- ⇋ Mn2+(aq) + 4H2O(l) 1.49
oxidizing agent/ Weaker
H2O2(aq) + 2H+(aq) + 2e- ⇋ 2H2O(l) 1.78
Higher tendency reducing
Co3+(aq) + e- ⇋ Co2+(aq) 1.82
to reduced S2O82-(aq) + 2e- ⇋ 2SO42-(aq) 2.01
agent
O3(g) + 2H+(aq) + 2e- ⇋ O2(g) + H2O(l) 2.07
F2(g) + 2e- ⇋ 2F-(aq) 2.87
Table source: General Chemistry 9th Edition. Darrell D.Ebbing and Steven D. Gammon. 2009 Cengage Learning.
CHECKPOINT 6
Arrange the following species in order of increasing oxidizing AGENT strength and
reducing AGENT strength
Calculate the standard cell potential of the following voltaic cell at 25°C using
standard electrode potentials.
SOLUTION
°
Ecell = Ecathode
° °
− Eanode
°
Ecell = EFe
°
− E Al°
= − 0.41 V − ( − 1.66 V )
= 1.25 V
4.3 STANDARD ELECTRODE POTENTIAL AND CELL
POTENTIAL
SOLUTION
In this reaction, Zn2+ is the oxidizing agent on the left side; Fe3+ is the oxidizing
agent on the right side.
The corresponding standard electrode potentials are:
The stronger oxidizing agent is the one involved in the half-reaction with more
positive standard electrode potential, so Fe3+ is the stronger oxidizing agent.
SOLUTION
Ni2+(aq) + 2e- Ni(s)
Fe(s) Fe2+(aq) + 2e-
Ni2+(aq) + Fe(s) Ni(s) + Fe2+(aq)
°
Ecell = Ecathode
° °
− Eanode
= EºNi - EºFe
= -0.25 V – (-0.44 V)
= + 0.19 V
Positive value indicates a spontaneous reaction.
CHECKPOINT 7
LEARNING OBJECTIVES
Photo source: Chemistry: A Molecular Approach by Tro, Nivaldo J.2008 Pearson education
4.4 NON-STANDARD CELL POTENTIAL
Photo source: Chemistry: A Molecular Approach by Tro, Nivaldo J.2008 Pearson education
4.4 NON-STANDARD CELL POTENTIAL
0.0592
Ecell = E0cell - log Q
n
Where:
n = no. of moles of electrons
When Q < 1 and thus [reactant] > [product], log Q < 0, so Ecell > E°cell
When Q = 1 and thus [reactant] = [product], log Q = 0, so Ecell = E°cell
When Q >1 and thus [reactant] < [product], log Q > 0, so Ecell < E°cell
Note: In heterogeneous systems, which involve solids, do not include solid in Nernst Equation ( for Q)
EXAMPLE
Consider a galvanic cell involving the following half-reactions:
SOLUTION
Because -0.74 V < -0.25 V, the Cr3+/Cr pair will undergo oxidation.
Ni2+(aq) + 2e- Ni(s)
Cr(s) Cr3+(aq) + 3e-
Then balance the number of electrons and add them together:
3Ni2+(aq) + 6e- 3Ni(s)
2Cr(s) 2Cr3+ (aq) + 6e-
3Ni2+ (aq) + 2Cr(s) 3Ni(s) + 2Cr3+ (aq)
Cont. SOLUTION
Then the E°cell of the reaction
3Ni2+ (aq) + 2Cr(s) 3Ni(s) + 2Cr3+ (aq)
can be determined as:
°
Ecell = Ecathode
° °
− Eanode
= EºNi - EºCr
= -0.25 V – (-0.74 V)
= + 0.49 V
We next write down the Nernst equation:
o 0.0592
Ecell = Ecell - log Q
n
=E o
-
[ ]
0.0592
log
Cr 3+
2
cell
6 [ ] Ni2+
3
= 0.49 V -
0.0592
log
[2.0 ×10 ] -3 2
6 [1.0 ×10 ] -4 3
= 0.49 V - 0.0651 V
= 0.42 V
CHECKPOINT 8
Consider the cell below
Pt(s)| H2(g)| H+(aq) ΙΙ Fe3+(aq), Fe2+(aq) | Pt(s)
LEARNING OBJECTIVES
Electrolysis of molten
sodium chloride
Photo source: General Chemistry 9th Edition. Darrell D.Ebbing and Steven D. Gammon. 2009 Cengage Learning.
4.5 ELECTROLYTIC CELL AND ITS APPLICATIONS
When there are more than one cation is present, the cation that is easiest to
reduce will be reduced first at the cathode.
The reduction half-reaction with the most positive E°red will be
reduced at the cathode
When more than one anion is present, the anion that is easiest to oxidize will be
oxidized first at the anode.
The reduction half-reaction with the most negative E°red will be
oxidized at the anode
EXAMPLE
Predict the half-reaction occurring at the anode and cathode for the
electrolysis of a mixture of molten AlBr3 (l) and MgBr2(l).
ox: 2 Br−(l) → Br2(g) + 2 e−
because the reduction of Al3+ has a more positive (less negative) E°, it is
easiest and will occur.
Thus,
anode: 2 Br−(l) → Br2(g) + 2 e−
cathode: Al3+(aq) + 3 e− → Al(s)
4.5 ELECTROLYTIC CELL AND ITS APPLICATIONS
Electrolysis of water
2 H2O(l) → 2 H2(g) + O2(g)
Oxidation (Anode)
2H2O(l) → O2(g) + 4H+(aq) +4e- Eo = -1.23V
(standard conditions)
Reduction (Cathode)
2H2O(l) + 2e- →H2(g) + 2OH-(aq) Eo = -0.83V
(standard conditions)
Photo source: Chemistry: A Molecular Approach by Tro, Nivaldo J.2008 Pearson education
4.5 ELECTROLYTIC CELL AND ITS APPLICATIONS
EXAMPLE
Photo source: Chemistry 3rd Edition. Blackman,Bottle, Schmid, Mocerino & Wille.2016. John Wiley & Sons Australia.
4.5 ELECTROLYTIC CELL AND ITS APPLICATIONS
Below is a set of rules that can be used to predict the outcomes of electrolysis
reactions in aqueous solution (using inert electrode)
1. Identify all cations and anions in the system. In aqueos solution, we also
have H+ and OH-.
2. The product of electrolysis at the anode is always O2 except if the
electrolytes contains high concentrate ions of Cl-, Br- and I- ions.
3. During electrolysis of aqueous solutions, reactive metals, such as Na or K
are never produced at the cathode. If the cations come from a metal that
has a less positive reduction potential than water, H2 will be liberated at the
cathode. If the cations come from a metal that has a more positive reduction
potential than water, then the metal will be deposited at cathode.
4. Identify the cations and anions that remain in the solution after electrolysis.
5. Summarise all reactions in 1-4 to obtain the full reaction.
4.5 ELECTROLYTIC CELL AND ITS APPLICATIONS
To summarize the best way to choose redox reaction that occur at each
electrode respectively:
CATHODE
The half-reaction with the bigger (more positive) reduction potential occurs
more easily as an reduction.
ANODE
The half-reaction with the smaller (less positive) reduction potential
occurs more easily as an oxidation.
Or
the half-reaction with the larger (less negative) oxidation potential occurs
more easily as an oxidation.
EXAMPLE
SOLUTIONS
At the cathode
Ni2+(aq) + 2e- →Ni(s) E0 Ni2+/Ni=-0.25 V
Zn2+(aq) + 2e- → Zn(s) E0 Zn2+/Zn=-0.76 V
2H2O(l) + 2e- → H2(g) + 2OH-(aq) Eº = -0.83 V
At the anode
S2O82-(aq) + 2e- → 2SO42-(aq) Eº = +2.01 V
4H+(aq) + O2(g) +4e- → 2H2O(l) Eº = +1.23 V
This answer is based on the more positive reduction potential (Eº value )
will have tendency to undergo reduction and the less positive reduction
potential (Eº value ) will have tendency to undergo oxidation.
CHECKPOINT 10
+ +
Steel case
- Al2O3 Al2O3
-
Al2O3
Al2O3 Al2O3
(Negative
anodes)graphite
-
When the battery is turned on and electricity flows, the aluminium forms at the
negative cathode and sinks to the bottom of the tank where is tapped off as a
pure liquid metal. Oxygen forms at the positive anodes. The oxygen reacts
with the carbon of the graphite, forming carbon dioxide. The positive anode
therefore burns away, and needs replacing regularly.
4.5 ELECTROLYTIC CELL AND ITS APPLICATIONS
Cathode Anode
• The aluminium ions from molten • The oxygen react with carbon to
aluminium oxide- cryolite solution make carbon dioxide, CO2
are reduced • The oxygen ions are oxidised
Al3+(l) + 3e- → Al(l) 2O2-(l) → O2 (g) + 4e-