Professional Documents
Culture Documents
Design of Water Tank - PPT
Design of Water Tank - PPT
L.ADITYA VARMA(08241A0103)
G.GOPINATH(08241A0115)
MD.MAHEMOOD(08241A0120)
K.NAVEEN KUMAR(08241A0126)
K.J.N. SAI NITESH(08241A0136)
K.SRIKANTH(08241A0147)
1. Introduction
2. Classification of tanks
3. Materials required
4. Design data
5. Hydraulic features and member sizes
6. Loads
7. Results
8. References
9. Conclusions
1)Tank resting on ground.
2)Elevated tanks.
3)Underground tanks.
--Deals with the structural analysis and design of an
water tank.
--The analysis is done by the software system STAAD
Pro for staging portion.
--The design of container is done manually.
1)Circular.
2)Rectangular.
3)Intze.
4) Spherical tanks.
5) conical bottom tanks.
6) PSC Tanks.
1)Concrete.
2)Steel.
3)Minimum reinforcement.
4)Water proofing materials.
--M 30 and M 20.
--High Quality.
--Strength.
--Should be leak proof.
--Should not crack.
--Permissible stress should not exceed
the limit.
--Permissible stress in direct
tension=1000kg/cm^2.
--Tensile stress in bending=1000-1250
kg/cm^2.
--0.3% of gross cross sectional area up
to 100mm thickness.
--0.2% of gross cross sectional area for
100-450 mm thickness.
--0.2% of gross cross sectional area for
>450 mm thickness in each direction.
-The object of using them is to fill the pores of the
concrete and to obtain a dense and less
permeable concrete.
-Commonly used is HYDRATED LIME.
-Other agents like powdered chalk or talc,
Sodium silicate Zinc sulphate, Calcium
chloride etc., used.
Parameters:
-Concrete for container portion M30.
-Concrete for staging portion M20.
-Steel HYSD 415N/mm^2.
-Capacity 150000L.
-Staging 12m.
-Seismic zone-3.
-Staging to be designed with M20 and executed
with M30.
-Ground Level = 340.75m.
-Lowest water level = 352.725m.
-Maximum water level = 355.725m.
-Dead storage = .15m.
-Free board = .3m.
-Effective water depth = 3m
-Number of columns supporting the ESR = 5
-Number of columns inside container =1
-Number of braces =3
-Size of container(diameter) =8m.
-Size of column supporting ESR(diameter) = 0.4m.
-Size of column inside container(diameter) =0.2m.
-Braces =250*350mm.
-Roof beam =200*300mm.
-Floor beam =300*600mm.
-Floor ring beam =300*300mm.
Types of loads :
--Dead loads
--Imposed loads
--Wind loads
--Earthquake loads
Involves self-weight of
--Container
--Columns
--Braces
--Railing
--MS ladder
--Imposed also known live loads.