Professional Documents
Culture Documents
Connected Version
Installation Guide
SL7000 Transformer Connected Version
Installation Guide
SL7000 TC Installation Guide
Mounting:
The meter is intended to be mounted on a metering panel.
180 85
SL7000
150
Connection:
Safety warning: switch off network supply before connecting the meter.
Unscrew the terminal cover and connect the wires according to the following drawing.
Main connections:
The terminals permit the connection of solid or stranded wires (terminal diameter 9.4mm, 2 x M6 screws
per terminal. For aluminium cables (multi-strand), the use of a tin-plated copper sheath on each conductor
is compulsory to avoid corrosion and terminal.
The configurable parameter of the meter is able to define if it is connected to a three-wire system or a four-
wire system.
1
SL7000 TC Installation Guide
OFF
BAT
ON
RS485
RJ45
RS232
RJ45
option : APS*
S
S S
P
L1 P P
L2
L3
2
SL7000 TC Installation Guide
RJ45 RJ45
Customer Utility
port port
1 2 3 4 5 1 2
1 2 3 4 5 6
Control Outputs Control
(1 to 4) Inputs Pulse Outputs
(1 to 2) (1 to 6) 1 2 3 4
Pulse Inputs
(1 to 4)
RJ45 RJ45
Customer Utility
port port
1 2 3 4 5 1 2
1 2 3 4 5 6
Control Outputs Control
(1 to 2) Inputs Pulse Outputs
(1) (1 to 2) 1 2 3 4
Pulse Inputs
(1 to 2)
Press the reset button to allow programming, digit by digit, with the display button (the digit to be modified
will blink), move to the next digit by pressing the reset button.
When all the digits are set, press the reset button twice to activate the new date or time.
3
EL-0041.0-GB-02.03 - © Copyright 2002, Actaris. All Rights Reserved. - Actaris reserves the right to change these specifications without prior notice.
Actaris SAS
ZI de Chasseneuil - Avenue des Temps Modernes
86361 Chasseneuil du Poitou cedex - France t e l +33 5 49 62 70 00
For more information, see www.actaris.com fax +33 5 49 62 70 89