Professional Documents
Culture Documents
This clear-coated wood toy play set can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum
clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray 3 light final coats of clear, sanding with 400 sandpaper
after drying. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry.
2 ToymakingPlans.com © 2021
Warning: Read before copying. Red Bull Air Racer
The unauthorized reproduction or
distribution of this copyrighted work is
FULL-SIZE WOOD TO PLAN SET
illegal. Criminal copyright infringement
including infringement without
monetary gain, is investigated by the
FBI and is punishable by up to 5 years
in federal prison and a fine of $250,000.
ToymakingPlans.com © 2021 3
Red Bull
Air Racer
This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-
Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray 3 light final coats of clear, sanding
with 400 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry.
4 ToymakingPlans.com © 2021
Red Bull
Air Racer
This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-
Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray 3 light final coats of clear, sanding
with 400 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry.
ToymakingPlans.com © 2021 5
Red Bull
Air Racer
This color painted wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-
Oleum. Spray 2 coats of primer sanding each coat with 220 sandpaper when dry. Then spray 3 coats of color sanding with 400
sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry.
6 ToymakingPlans.com © 2021
Red Bull
Air Racer
This color painted wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-
Oleum. Spray 2 coats of primer sanding each coat with 220 sandpaper when dry. Then spray 3 coats of color sanding with 400
sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry.
ToymakingPlans.com © 2021 7
Red Bull
Air Racer
TOP VIEW
ACTUAL SIZE
SIDE VIEW
8 ToymakingPlans.com © 2021
Red Bull
Air Racer
REAR VIEW
ACTUAL SIZE
FRONT VIEW
ToymakingPlans.com © 2021 9
RED BULL AIR RACER PATTERNS INDEX
RED BULL AIR RACER PARTS LIST
1
1. 1/4” x 3-7/8” x 10-3/16” make 1
2. 1/4” x 2-15/16” x 3-5/8” make 1
3. 1/4” x 2-3/8” x 2-7/16” make 2
4. 1/4” x 13/16” x 2-1/2” make 2
page 18
5. 3/4” diameter x 1/8” buy 2*
6. 1-1/2” dia. x 1/2” buy 2*
5
11. 7/8” x 7/8” x 1-3/4” make 1
6 page 19 12. 1/4” diameter x 1” make 1
7
*See page 11 for Parts 5 and 6 buying info.
ATTENTION:
FULL-SIZE PLAN VIEWS ARE ON PAGE 14-17.
8
page 20
9
10
11
12
page 21
10 ToymakingPlans.com © 2021
RED BULL AIR RACER Red Bull
EXPLODED VIEW Air Racer
5
1
6 11
4 8
8
1
11
3
2
Step 1
Assembly
Step 2
3
Assembly
Step 3
Assembly
4
6
10
Step 4 7
Assembly
4
12 Step 5 6 5
Assembly
9
ToymakingPlans.com © 2021
13
Red Bull Plan Views
Air Racer 0 printer scale 1 2 3
ACTUAL SIZE
B
Finished Wood Toy Size
4” H x 10-1/8” W x 10-5/8” L
3
5
6 4
11
2
A 7
6 4
TOP
PLAN VIEW
5
3
1
ATTENTION:
THESE FULL-SIZE PLAN
VIEWS ARE FOR ASSEMBLY
REFERENCE. INDIVIDUAL
PATTERNS ON PAGES 18-21.
TIP:
To print paper plan views and patterns
from your computer only print pages 14-21
landscape mode. Pages are printed in black
to conserve ink. Check printer printed size
accuracy by measuring the printer scale on
each pattern with a ruler. If printed size is not
100% adjust printer settings.
14 ToymakingPlans.com © 2021
Plan Views Red Bull
0 printer scale 1 2 3 Air Racer
ACTUAL SIZE
12
10
TOP
PLAN VIEW
ATTENTION:
THESE FULL-SIZE
PLAN VIEWS ARE FOR
ASSEMBLY REFERENCE.
INDIVIDUAL PATTERNS
ON PAGES 18-21.
TIP:
To print paper plan views and patterns from your computer
only print pages 14-21 landscape mode. Pages are printed in
black to conserve ink. Check printer printed size accuracy
by measuring the printer scale on each pattern with a ruler. If
printed size is not 100% adjust printer settings.
ToymakingPlans.com © 2021 15
Red Bull Plan Views
Air Racer 0 printer scale 1 2 3
ACTUAL SIZE
TIP:
To print paper plan views and patterns from your computer
only print pages 14-21 landscape mode. Pages are printed in
black to conserve ink. Check printer printed size accuracy
by measuring the printer scale on each pattern with a ruler. If ATTENTION:
printed size is not 100% adjust printer settings.
THESE FULL-SIZE PLAN
VIEWS ARE FOR ASSEMBLY
REFERENCE. INDIVIDUAL
PATTERNS ON PAGES 18-21.
2
11
8
4
C
D
7
5
SIDE
PLAN VIEW 6
16 ToymakingPlans.com © 2021
Plan Views Red Bull
0 printer scale 1 2 3 2
Air Racer
ACTUAL SIZE
ATTENTION:
10 11
THESE FULL-SIZE
PLAN VIEWS ARE FOR
9 ASSEMBLY REFERENCE.
INDIVIDUAL PATTERNS
4 4 ON PAGES 18-21.
12
3 3
10
5 5
7 FRONT
PLAN VIEW
9
6 8 6
12
TIP:
D
To print paper plan views and patterns from your computer
only print pages 14-21 landscape mode. Pages are printed in
black to conserve ink. Check printer printed size accuracy
by measuring the printer scale on each pattern with a ruler. If
printed size is not 100% adjust printer settings.
ToymakingPlans.com © 2021 17
Red Bull Patterns
Air Racer 0 printer scale 1 2 3
ACTUAL SIZE
TIP:
To print paper plan views and patterns from your computer
only print pages 14-21 landscape mode. Pages are printed in
black to conserve ink. Check printer printed size accuracy
by measuring the printer scale on each pattern with a ruler. If
printed size is not 100% adjust printer settings.
18 ToymakingPlans.com © 2021
Patterns Red Bull
0 printer scale 1 2 3 Air Racer
ACTUAL SIZE
3 3
4
TIP:
To print paper plan views and patterns
from your computer only print pages 14-21
landscape mode. Pages are printed in black
PART 5 HUBCAPS: Make or buy to conserve ink. Check printer printed size
the hubcaps. The hubcaps are cut accuracy by measuring the printer scale on
from a 3/4” diameter dowel. Or buy each pattern with a ruler. If printed size is
hubcaps from www.craftparts.com: PART 6 WHEELS: Make or buy
6 not 100% adjust printer settings.
1/4” dia. the wheels. The wheels are cut
WOOD CIRCLE / DISC #JC5712
hole thru with a 1-3/4” hole saw. Drill a 1/4”
3/4” x 1/8” thick Wood Circle / Disc
dia. axle hole. Or buy wheels from
BUY 2
5 www.craftparts.com:
FLAT SLAB WHEELS #TWF150
2. 1/4” x 2-15/16” x 3-5/8” make 1
www.craftparts.com
1-1/2” diameter x 1/2” thick 3. 1/4” x 2-3/8” x 2-7/16” make 2
Hole size 1/4” BUY 2
4. 1/4” x 13/16” x 2-1/2” make 2
5. 3/4” diameter x 1/8” buy 2
6. 1-1/2” dia. x 1/2” buy 2
7 7. 1/4” diameter x 2-1/2” make 1
ToymakingPlans.com © 2021 19
Red Bull Patterns
Air Racer 0 printer scale 1 2 3
ACTUAL SIZE
TIP:
To print paper plan views and patterns from your computer only print pages 14-21 landscape mode. Pages are printed in black to conserve ink.
Check printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size is not 100% adjust printer settings.
WING SLOT
TIP:
To print paper plan views and patterns from your computer only print pages
14-21 landscape mode. Pages are printed in black to conserve ink. Check
printer printed size accuracy by measuring the printer scale on each
pattern with a ruler. If printed size is not 100% adjust printer settings.
10
1/4” dia. x
3/16” deep
5/16” dia.
hole thru
11
Windshield
ToymakingPlans.com © 2021 21