Professional Documents
Culture Documents
This catalogue pooling the products of the brands We have done our outmost to make sure that responsibility for any misprints and any consequences
Glamox, aqua signal and Luxo. illustrations and technical specifications are correct at such errors might lead to the users of this catalogue.
Final editing closed 29.06.2012 the date of publication.
Glamox ®, aqua signal ® and Luxo ® are internationally
Published by Glamox ASA, We reserve the right to make technical changes or registered and copyright protected trademarks.
Birger Hatlebakks veg 15 adjustments involving products and/or production
NO-6405 Molde/Norway processes without further notice. Glamox disclaims
2
Table of contents
Following catalogues are available:
Introduction GMO-Group............................ 4
Introduction
Page 4
E80-R(M) E85-S 1927 Exit Sign 0631 Illum. Sign GEF 1303/04/06
Page 110 Page 116 Page 119 Page 120 Page 121 Page 122
IP OptiWin ®
67 Alphabetic index....................................213
Protection degrees Norms & Regulations Types of protection Light definitions OptiWin®
Lamp data
Page 187 Page 192 Page 193 Page 196 Page 197 Page 205
3
Premium product brands:
TL TX FL FX SL NL NX DL AL HL TH EL
Technical light Ex Technical Floodlight Ex Floodlight Searchlight Navigation Ex Navigation Downlight Architectural Helideck light Technical Emergency light
light light light light heating
4
Global Marine & Offshore
Total lighting solutions
The Glamox group aims to be the first choice when quality, compe-
tence and reliability counts. The company supplies a complete range
of lighting equipment for marine and offshore vessels.
The group has a market model that enables it to serve the important
sales and distribution channels aimed at shipyards, oil companies,
FPSO and drilling companies, engineering consultants and installa-
tion contractors.
5
Marine and Offshore Lighting
for the future
Emergency light
Our aim is to be a solution-orientated
partner for our customers. We make
emergency light fixtures according to
the rules of maritime classification
societies and standards with modern
design.
© Scarabeo 8
6
Technical Lighting
INDOOR IP20-44
DLT RS (M) DL............................ 12
DLT RS (M) FR............................ 14
DLT RT (M) DL............................ 16
DLT RT (M) FR............................. 18
TL11-R250...................................20
DLT RS (M) DL DLT RS (M) FR DLT RT (M) DL DLT RT (M) FR TL11-R250 0667 0667 QUADRATIC
Page 12 Page 14 Page 16 Page 18 Page 20 Page 22 Page 25 0667...................................... 22
0667 QUADRATIC..................... 25
0666...................................... 26
0666 QUADRATIC.................... 29
1282/1402.............................. 30
TINA (M).................................. 32
TL10-S T8 DL...............................34
TL10-S T8 FR.............................. 36
0666 0666 QUADRATIC 1282/1402 TINA (M) TL10-S T8 DL TL10-S T8 FR SKA (M)
Page 26 Page 29 Page 30 Page 32 Page 34 Page 36 Page 38 SKA (M)................................... 38
C10-W (M)............................... 40
TL12-W 137.............................. 42
TL14-W58................................44
1354/1355/1854.....................46
1156/1856.............................. 48
GFBT....................................... 51
C10-W TL12-W 137 TL14-W58 1354/1355/1854 1156/1856 GFBT 1984 Steplight 1984 Steplight........................... 52
Page 40 Page 42 Page 44 Page 46 Page 48 Page 51 Page 52 VISION.................................... 54
VERIT....................................... 55
L-1.......................................... 57
OVELO.................................... 59
TEREA......................................60
NINETY................................... 61
AIR LED.................................... 62
VISION VERIT L-1 OVELO TEREA NINETY AIR LED LFM........................................ 63
Page 54 Page 55 Page 57 Page 59 Page 60 Page 61 Page 62 CIRCUS................................... 65
LHH LED...................................66
HS CHART LAMP....................... 67
Outdoor/Indoor IP54-68
Watertight product overview......... 71
MIR T8 IP66/67........................ 72
MIR T8 IP54.............................. 74
1044...................................... 76
1444......................................... 78
Watertight product MIR T8 IP66/67 MIR T8 IP54 1044 1444 1445 1448
overview Page 72 Page 74 Page 76 Page 78 Page 80 Page 82 1445.........................................80
Page 71 1448...................................... 82
0044...................................... 84
1888/1889.............................. 86
GRMB..................................... 88
0673 . ......................................90
1961....................................... 92
1997...................................... 94
0044 1888/1889 GRMB 0673 1961 1997 1986
Page 84 Page 86 Page 88 Page 90 Page 92 Page 94 Page 96 1986...................................... 96
1771...................................... 98
225
Ø10.5
1891..................................... 100
200
MIL....................................... 102
15.5
9
Technical Lighting
Indoor IP20-44
INDOOR IP20-44
DLT RS (M) DL............................ 12
DLT RS (M) FR............................ 14
DLT RT (M) DL............................ 16
DLT RT (M) FR............................. 18
TL11-R250...................................20
DLT RS (M) DL DLT RS (M) FR DLT RT (M) DL DLT RT (M) FR TL11-R250 0667 0667 QUADRATIC
Page 12 Page 14 Page 16 Page 18 Page 20 Page 22 Page 25 0667...................................... 22
0667 QUADRATIC..................... 25
0666...................................... 26
0666 QUADRATIC.................... 29
1282/1402.............................. 30
TINA (M).................................. 32
TL10-S T8 DL...............................34
TL10-S T8 FR.............................. 36
0666 0666 QUADRATIC 1282/1402 TINA (M) TL10-S T8 DL TL10-S T8 FR SKA (M)
Page 26 Page 29 Page 30 Page 32 Page 34 Page 36 Page 38 SKA (M)................................... 38
C10-W (M)............................... 40
TL12-W 137.............................. 42
TL14-W58................................44
1354/1355/1854.....................46
1156/1856.............................. 48
GFBT....................................... 51
C10-W TL12-W 137 TL14-W58 1354/1355/1854 1156/1856 GFBT 1984
1984 Steplight........................... 52
Page 40 Page 42 Page 44 Page 46 Page 48 Page 51 Page 52 VISION.................................... 54
VERIT....................................... 55
L-1.......................................... 57
OVELO.................................... 59
TEREA......................................60
NINETY................................... 61
AIR LED.................................... 62
VISION VERIT L-1 OVELO TEREA NINETY AIR LED LFM........................................ 63
Page 54 Page 55 Page 57 Page 59 Page 60 Page 61 Page 62 CIRCUS................................... 65
LHH LED...................................66
HS CHART LAMP....................... 67
11
DLT RS(M) DL Ta IP B0 B15
Lighting fixture for panel ceilings 40° 20
Application
For recessed installation in panel ceilings.
Design
According to maritime requirements.
Housing
Steel housing and variants of side
rails or frames for adaption to
most type of panel ceilings.
Finish
Powder coated white RAL9016.
12
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Spare Parts/
Spare Accessories
Parts/ Accessories
Grommet Gear tray Standard Mounting
Bracket 223000000
Optional Mounting Bracket 201000000
Ballast
Lampholder
Sidlframe
DLT sidl Cable clip
DLT sidl
Tube
DL
Terminal block
L1
L
34
L2
102
260
246
96
218
B1
Cut outxmeasure
L1 for solid ceiling
218 = 264 x 639 (W x L)
236 = 264 x 1249 (W x L) 273
For Damp/Dan M300 = only length
Measurements are in mm
www.glamox.com/gmo
13
DLT RS(M) FR Ta IP B0 B15
Lighting fixture for panel ceilings 40° 20
Housing
Steel housing and variants of side
rails or frames for adaption to
most type of panel ceilings.
Finish
Powder coated white RAL9016. DLT RS(M) FR
14
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Ballast
Lampholder
Sidlframe
DLT sidl Cable clip
DLT sidl
Tube
Frame
Terminal block
L1
L
34
L2
102
260
246
96
218
B1
Cut outxmeasure
L1 for solid ceiling
218 = 264 x 639 (W x L)
236 = 264 x 1249 (W x L) 273
For Damp/Dan M300 = only length
Measurements are in mm
www.glamox.com/gmo
15
DLT RT(M) DL Ta IP
Lighting fixture for T-profile ceilings 40° 20
• Easy installation
• High quality light distribution
• Easy maintenance
Application
For recessed installation in T-profile ceilings.
Design
Designed according to
maritime requirements.
Housing
Steel housing with plastic end cap
box for lamp holder in one end.
Finish
Powder coated white RAL9016.
16
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable clip
Lampholder
Ballast
DL
480 (1080)
57 E
11
96
6
B2
L1
39
B1
L
B
20 (220)
40
Measurements are in mm
www.glamox.com/gmo
17
DLT RT(M) FR Ta IP
Lighting fixture for T-profile ceilings 40° 20
• Easy installation
• High quality light distribution
• Easy maintenance
Application
For recessed installation in T-profile ceilings. FR2
Design
Designed according to
maritime requirements. FR3
Housing
Steel housing with plastic end cap
box for lamp holder in one end.
Finish
Powder coated white RAL9016.
18
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable clip
Lampholder
Ballast
Frame
480 (1080)
57 E
11
96
6
B2
L1
39
B1
L
B
20 (220)
40
Measurements are in mm
www.glamox.com/gmo
19
TL11-R250 Ta IP IP
Luminaire for recessed installation 45° 20 44 GL B15 B0
Application
For recessed installation in solid
ceilings where IP44-rating is
required (DP and OP variants).
Design
According to maritime requirements.
Housing
Steel housing and steel frame
fits to housing with screws.
Finish
Powder coated white RAL9016.
Light source
Diffuser Two tubes T26 (T8), 18 or 36W.
Double prismatic (DP) or Opalic (OP)
plastic sheet in steel frame (IP44) or white Mounting
grid (WG) plastic in frame (IP20). To be installed in ceiling cut out with
adjustable suspension brackets.
Reflector Suspension brackets (MNT-S TL11-R250)
No reflector Emergency kit E14 Emergency kit B15
to be ordered separately.
Accessories Part-No
20
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
L
A
L1
B
B1
90
Measurements are in mm
www.glamox.com/gmo
21
0667 IP
Ceiling luminaire recessed 30 GL
• Smooth design
• Especially flat
• Easy to mount
Application
For accommodation and public ares etc.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet.
Finish
Powder coated white RAL9016 and
enamelled up to 70 - 80 µm thickness.
Diffuser Mounting
Opal polycarbonate. To be mounted with 8/12 holes, Ø4.5 m.
Lamp base
G13
Light source
Designed for T26 fluorescent lamp
18W, 36W (not included).
22
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840010600
(5 pcs)
9840010700
(5 pcs)
2x 18/20W 9840041000
2x 36/40W 9840041100
45
200
200 45
A
Ø4
257
330
245
330
273
257
245
,5
520 30
1040
Ø4
550 30
,5
649 1259
665 1275
1275
200
200
200
665
1247
637
Measurements are in mm
www.glamox.com/gmo
23
0667 QUADRATIC IP GLOBAL MARINE & OFFSHORE
Ceiling luminaire recessed 30 LIGHTING SOLUTIONS
• Smooth design
• Especially flat
• Easy to mount
Application
For accommodation and public ares etc.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet.
Finish
Powder coated white RAL 9016 and
enamelled up to 70 - 80 µm thickness.
Diffuser 245
Opal polycarbonate.
75
30
Electric
273
With magnetic ballast, low or high
230
power factor, as standard; electronic
ballast available. Flexible wiring
heat resistant up to 105°C.
330
Light source
273
Designed for TC/TC-D fluorescent
257
230
Mounting
To be mounted with 4 holes, Ø4.5 mm. 330 203
Cable entry
2 grommets for max. cable Ø12.7 mm.
Termination
Terminal 3-pole/6 mm².
www.glamox.com/gmo
25
0666 IP
Ceiling luminaire surface 30 GL
• Smooth design
• Especially flat
• Easy to clean
Application
For accommodation and public areas etc.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet.
Finish
Powder coated white RAL9016 and
enamelled up to 70 - 80 µm thickness.
Diffuser Mounting
Opal polycarbonate. To be mounted with 4/6 holes, Ø5 mm.
Light source
Designed for T26 fluorescent lamp
18W, 36W (not included).
26
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840041200
(10 pcs.)
9840010600
(5 pcs.)
9840010700
(5 pcs.)
2x 18/20W 9840041000
2x 36/40W 9840041100
18/20W 36/40W
206
206
400 1010
665 230
230
665 1275
230
330
273
275
666,5 1276,5
60
Measurements are in mm
www.glamox.com/gmo
27
0666 QUADRATIC IP GLOBAL MARINE & OFFSHORE
Ceiling luminaire surface 30 LIGHTING SOLUTIONS
• Smooth design
• Especially flat
• Easy to clean
Application
For accommodation and public areas etc.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet.
Finish
Powder coated white RAL9016 and
enamelled up to 70 - 80 µm thickness.
Diffuser
275
Opal polycarbonate.
Electric
54
230
With magnetic ballast, low or high
power factor, as standard; electronic
ballast available. Flexible wiring 4xØ
5
330
heat resistant up to 105°C.
275
Lamp base
G23/G24d-1
54
206
230
Light source
Designed for TC/TC-D fluorescent
lamp 9W/13W (not included). 5
4xØ
330
224
Mounting
To be mounted with 4 holes, Ø5 mm.
Cable entry
2 grommets for max. cable Ø11 mm.
Termination
Terminal 3-pole/6mm².
www.glamox.com/gmo
29
1282/1402 IP
Ceiling luminaire recessed 44 GL
• Flat size
• Frames in brass, chrome
plated or stainless steel
• Easy to clean
Application
For accommodation areas, shower
rooms, wash rooms and toilets.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel.
Finish
Powder coated white RAL9016 and
enamelled up to 70-80 µm thickness.
Mounting
Diffuser To be mounted with 4 holes, Ø4 mm.
Opal polycarbonate.
Cable entry
Electric Opening/2 grommets
With magnetic ballast low power factor,
flexible wiring heat resistant up to 105°C. Termination
Terminal 3-pole/6 mm²
Lamp base
E27/B22/G23
Light source
Incandescent lamp 60W (type 1402)/
TC tubular compact fluorescent lamp.
9W (type 1282) (not included).
30
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Spare Parts
Type 1282
G23 9840052500 (2 pcs)
Type 1402
E27 9840034500 (5 pcs)
B22 9840084800 (5 pcs)
9840068000
Measurements are in mm
www.glamox.com/gmo
31
TINA(M) Ta IP
Splash-proof universal luminaire 25° 44
• Functional design
• Easy to install
• Available with emergency light on request
Application
For wardrobes and areas
where IP44 is required.
Design
According to maritime requirements.
Housing
Housing in Aluzink with UV-resistant
plastic end caps.
Finish
Powder coated white RAL9016
End caps in white plastic.
Light source
Diffuser Two tubes T26 (T8), 18 or 36W.
Diffuser in extruded opalic (OP)
or clear (CL) acrylic plastic. Mounting
To be mounted on the ceiling
Reflector (Optic) surface, or semi-recessed where
Aluminium reflector (REFL) can low height of fixture is required.
be ordered as accessory. Reflector
Cable entry
Electric One double hole (2 x Ø19 mm) with
With magnetic ballast and capacitor rubber grommet in center on top of fixture.
(F) or electronic ballast (HF). One knockout Ø19 mm in each end.
Emergency versions with integral battery
(Ta=25ºC) available on request. Termination
One 5-way push in terminal
Lamp base 2.5 mm² in center.
G13 Through wiring (TW) 5 x 2.5 mm²
available on request.
32
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Grommet
End cap
Gear tray
Terminal block
Ballast Reflector
Lamp holder
Light tube
Diffuser
L
C
165
31
138
93
Measurements are in mm
www.glamox.com/gmo
33
TL10-S T8 DL IP
Ta
Lighting fixture for surface mounting 40° 20
Application
For surface mounting.
Design
According to maritime requirements.
Housing
Solid housing made from steel plates.
Finish
Powder coated white RAL9016.
Reflector (Optic)
Darklight optic type DL, designed
for high quality light distribution. Mounting
To be mounted on ceiling
Electric surface by 4 screws.
With magnetic ballast (F) or electronic
ballast (HF). Also available with analogue Cable entry
dimmable (HFDa) or digital dimmable (HFDd) One double hole 20.5 x 41 mm with
ballasts. Digital addressable dimmable rubber grommet on top, and one centered
(DALI) ballast are also available. Variants knock out Ø20.5 mm in each end.
with internal emergency battery backup.
Termination
Lamp base One 5-way push in terminal
G13 block, 2 x 2.5 mm².
Light source
Two tubes T26 (T8), 18 or 36W.
34
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Gear tray
Cable clip
Lamp holder
Light tube
DL
200
E
C
L
98
306
Measurements are in mm
www.glamox.com/gmo
35
TL10-S T8 FR IP
Ta
Lighting fixture for surface mounting 40° 20
Application
For surface mounting. FR2
Design
According to maritime requirements. FR3
Housing
Solid housing made from steel plates.
Finish
Powder coated white RAL9016.
Diffuser
Frame with options of plastic sheet
or grid available as accessory. Mounting
FR1 = Double prismatic acrylic plastic To be mounted on ceiling
FR2 = Opal acrylic plastic surface by 4 screws.
Frame to be ordered separately.
Cable entry
Electric One double hole 20.5 x 41 mm with
With magnetic ballast (F) or electronic rubber grommet on top, and one
ballast (HF). Also available with analogue knock out Ø20.5 mm in each end.
dimmable (HFDa) or digital dimmable
(HFDd) ballasts. Digital addressable Termination
dimmable (DALI) ballast are also available. One 5-way push in terminal
Variants with internal battery backup. block, 2 x 2.5 mm².
Lamp base
G13
Light source
Two tubes T26 (T8), 18 or 36W.
36
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Gear tray
Cable clip
Lamp holder
Light tube
Frame
C1
E
C
L
98
Measurements are in mm
www.glamox.com/gmo
37
SKA(M) IP
Ta
Universal batten fixture 40° 20
• Slim design
• Continuous mounting
• Reflectors available
Application
For lighting in channels and other
applications where slim design is important.
Design
Design for easy access in narrow areas.
Possible to install end to end
for continuous “light line”.
Housing
Steel housing with plastic end caps.
Finish
Powder coated white RAL9016.
Mounting
Diffuser To be installed directly to ceiling or wall.
Open fixture without any front cover.
Cable entry
Reflector (Optic) One hole Ø20 mm at the back, and
Reflector for symmetric (refl. A) or one knockout Ø13 mm at each end.
blackboard asymmetric (refl. T). Light
distribution is available on request. Termination 2 tube version
One 3-way push in terminal block,
Electric 2 x 2.5 mm². Through wiring (TW) with
Available and magnetic (F) with electronic 5-way push in terminal blocks.
ballast (HF). Also Digital (HFDd) or Analogue 2 x 2.5 mm² is available on request.
(HFDa) dimmable versions available.
Lamp base
G13
Light source
T26 (T8)
38
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Terminal block
Starter
L
C
49
65 130
53
90
Measurements are in mm
www.glamox.com/gmo
39
C10-W (M) IP
Ta
Wall fixture 40° 20
Application
For lighting in corridors or spaces where
fixture has to be mounted to wall or corner.
Design
Minimalistic classic design for
modern light sources.
Housing
Steel housing with V0-classified
plastic end caps.
Finish
Powder coated white RAL9016.
Mounting
Diffuser To be mounted directly to wall or in corners.
Opalic plastic diffuser.
Cable entry
Reflector (Optic) Two holes Ø20 mm at the back, and
No reflector available. Variant with two knockouts Ø20 mm at upper side.
uplight available on request.
Termination
Electric One 3-way push in terminal
Electronic ballast block, 2 x 2.5 mm².
Emergency as an option (E3/S)
Lamp base
G5
Light source
T16 (T5)
40
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Grommet
Terminal block
Ballast
Cable clip
End cap
Cover plate
Light tube
Diffuser
Lamp holder
L
20
88
40
C10W
C10WU
Measurements are in mm
www.glamox.com/gmo
41
TL12-W137 IP
Ta
Corridor fixture for cornice installation 45° 32 GL
Application
Corridor lighting for mounting in
corner on wall or ceiling.
Design
Rectangular design.
Housing
Steel housing with screw
fixing steel end caps.
Finish
Powder coated white RAL9016.
Diffuser Mounting
Opal polycarbonate diffuser in V0 quality. To be installed directly to wall or ceiling.
Accessories
42
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Lampholder
6003111301 (5 pcs)
6003131301 (5 pcs)
End cap
6001210835 (2 pcs)
Terminal block
3P 6003510000 (2 pcs)
5P 6003510005 (2 pcs)
636
A 488
448
58 52
137
4-forming 63
hole Ø5
TL12-W 137 118
1248
1100
1060
26
B 864
58
137
7
63
7-forming
hole Ø5
TL12-W 137 136
Measurements are in mm
www.glamox.com/gmo
43
TL14-W58 IP
Ta
Functional mirror lamp 40° 44 GL
Application
Mirror lamp for wall mounting above or on
side of mirror. Also available as berth lamp.
Design
Classic design.
Easy refitting of lamp without tool.
Housing
Steel housing with spring
operated plastic end caps.
Finish
Powder coated white RAL9016.
Light source
Diffuser T16 (T5) for 8W
Opal polycarbonate diffuser in V0 quality. T26 (T8) for 15, 18 and 36W
Electric Mounting
With electronic ballast. Variants with To be installed directly to wall or ceiling.
magnetic ballasts available on request.
Variants with two-pole switch (S), Cable entry Switch with
with universal shaver socket and One hole Ø19 mm with grommet in rubber cover
transformer for 110/220V (U) or with back. One knock-out Ø19 at top.
Schuko socket (SC) are available.
Termination
Lamp base One 3-way push in terminal
G5 for 8W block, 2 x 2.5 mm².
G13 for 15, 18 and 36W
S=switch, U=universial razor socket with transformer and selector 230/110, SU=switch/universial razor socket with
transformer and selector 230/110, SC=Schuko socket, SSC=switch and Schuko socket
Part-No. L C B Weight Lamp Lamp
Product
HF mm mm mm kg Code Base
TL14-W58 108 TL14000753 316 212 164 0.85 T16(T5) G5
TL14-W58 108 S TL14000760 316 212 164 0.85 T16(T5) G5
TL14-W58 108 SSC TL14000777 316 212 164 0.9 T16(T5) G5
TL14-W58 115 TL14000814 486 370 259 1.8 T26(T8) G13
TL14-W58 115 S TL14000845 486 370 259 1.8 T26(T8) G13
TL14-W58 115 U TL14000821 486 370 259 2.3 T26(T8) G13
TL14-W58 115 SU TL14000852 486 370 259 2.3 T26(T8) G13
TL14-W58 118 TL14000913 637 521 319 2,1 T26(T8) G13
TL14-W58 118 S TL14000944 637 521 319 2.1 T26(T8) G13
TL14-W58 118 U TL14000920 637 521 319 2.6 T26(T8) G13
TL14-W58 118 SU TL14000951 637 521 319 2.6 T26(T8) G13
TL14-W58 136 TL14001019 1247 1131 624 2.8 T26(T8) G13
HF = 230-240V/50-60Hz
44
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Spare Parts/ Accessories
107
58
65
C
Measurements are in mm
www.glamox.com/gmo
45
1354/1355/1854 IP
Berth light 20
Application
For accomodation areas.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Polycarbonate dark brown, reflector matt,
deep drawn.
Finish
Inside reflector enamelled white RAL9016.
For 1854 all parts also in white
RAL9016 available. Mounting
To be mounted with 4 holes, Ø5 mm.
Electric
With magnetic ballast low power Cable entry
factor for 1854. Flexible wiring silicone Opening on rear side, dia. 12 x 30 mm.
insulated and heat resitant up to
180°C, 1-way 2 pole switch; connector Termination
between wall plate and light. Plug connection 2/5 pole 2.5 mm².
Lamp base
E14/B15/E27/B22 or G23
Light source
Incandescent all purpose lamp max
40W (Type 1355)/incandescant
tubular lamp max 40W (type 1354).
TC tubular compact fluorescent lamp
7W (type 1854) (not included).
46
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840071900 (5 pcs)
9840008500 (5 pcs)
9840096600 (2 pcs)
1355
1354/1854
Measurements are in mm
www.glamox.com/gmo
47
1156/1856 IP
Berth light surface 30
• Slim design
• Aluminium housing
• Ideal for pullman coach berth
Application
For accommodation areas and lounges.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Aluminium brushed/zinc coated steel sheet.
Finish
Anodized brown, end caps
polycarbonate brown, powder
coated white, end caps white.
Mounting
Diffuser To be mounted with 4 holes, Ø5 mm.
Polycarbonate
Cable entry
Electric Opening on rear side.
With magnetic ballast low power
factor. Flexible wiring heat resistant up Termination
to 105°C; 1-way 2-pole switch. Terminal 3-pole/2.5 mm².
Lamp base
G5 (type 1156); G23 (type 1856)
Light source
T16 fluorescent lamp 8W (type 1156),
tubular compact fluorescent lamp 7/9/
11W (type 1856) (not included).
48
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Brown 9840082200
White 9840096700 9840078200
9840053200 (5 pcs)
9840044100 (5 pcs)
9840049000 (2 pcs)
120
Ø5 38
72
72
38
11 200
17
35
240 38
230
38 Ø5
41
72
72
42
17
200
330 35
38
Measurements are in mm
www.glamox.com/gmo
49
GFBT Ta IP GLOBAL MARINE & OFFSHORE
Decorative berth lamp 25° 20 LIGHTING SOLUTIONS
Application
Bed side light for wall mounting
Up lighting through perforated housing.
Design
Half circular design with light
adjustable by moving the lid.
Housing
Steel housing with plastic end caps.
Finish
Powder coated white RAL9016.
Diffuser
Plastic cover when lid is open.
84
Reflector (Optic) 297 83
No reflector.
Perforated area on top of housing
makes soft up light.
Electric
Available with magnetic ballast
(Low power factor -L).
Lamp base
G23 Lamp holder.
Light source
TC-S compact light source.
Mounting
To be installed directly to wall.
Cable entry
Open for cable entering on back.
Termination
One 3-way push in terminal
block, 2 x 2.5 mm².
www.glamox.com/gmo
51
1984/1986 1984 IP
Step light 20
• Timeless design
• With red shade available
• Non-glare
Application
For steps and low location illumination.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet.
Finish
Powder coated white RAL9016 and
enamelled up to 70-80 µm thickness,
fascia pre painted for custom made
finishing after installation. Mounting
To be mounted with 4 holes, Ø4.0 mm.
Pane
Clear polycarbonate Cable entry
Pane in red available 3 grommets for max. cable diameter 11 mm.
Electric Termination
With magnetic ballast. Flexible wiring Terminal 3-pole/6 mm².
heat resistant up to 105°C.
Lamp base
G23
Light source
TC tubular compact fluorescent
lamp 5/7W. (not included).
52
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840053100 (5 pcs)
220
200 70 65
54
80
Hole 4
7
130
55 ±0.5
65
213 ±0.5
Measurements are in mm
www.glamox.com/gmo
53
VISION IP GLOBAL MARINE & OFFSHORE
Ergonomic task light 20 LIGHTING SOLUTIONS
Application
Task light with spring balanced
800 mm arm.
Design
Designed for maximum flexibility.
Housing
Plastic housing and spring balanced arm.
Finish
White or black colour.
Reflector (Optic)
Reflector in mirror finished aluminium. Lux
1600
1000
400
Mounting
Table clamp (included).
Alternative bases and brackets
available on request.
Cable entry
Cable and plug delivered with fixture.
Termination
For connection to standard socket outlet.
Accessories
54
VERIT IP GLOBAL MARINE & OFFSHORE
A versatile and flexible task light 20 LIGHTING SOLUTIONS
Application
Task light with spring balanced arm.
Design
Versatile and flexible task light.
Housing
Plastic housing and steel
spring balanced arm.
Finish
White or black colour.
Reflector (Optic)
Symmetric reflector in aluminum. Mounting 762
293
Table clamp (included).
Electric Alternative bases and brackets
Inbuilt HF-ballast. available on request.
269
Light source Termination 86
TC-DEL compact fluorescent lamp, 13W. For connection to standard socket outlet.
Accessories
www.glamox.com/gmo
55
L-1 IP GLOBAL MARINE & OFFSHORE
The world’s original architect lamp 20 LIGHTING SOLUTIONS
• Unique design
• Spring balanced arm
• Ingenious lighting properties
Application
Task light with spring balanced
arm 1000 mm.
Design
Versatile and flexible task light.
Housing
Housing in aluminium.
Finish
White, black, grey or chrome.
Reflector (Optic)
Symmetric reflector painted in white. Mounting 1000
50”
Table clamp (included).
Electric Alternative bases and brackets 170
220-240V available on request.
155
6.1”
Lamp base Cable entry
E27 Cable and plug delivered with fixture.
Accessories
www.glamox.com/gmo
57
OVELO IP GLOBAL MARINE & OFFSHORE
Flexible ergonomic LED task light 20 LIGHTING SOLUTIONS
Application
LED task light with enclosed spring
balanced arm 700 mm.
Design
Unique design with high light output.
Housing
Housing in aluminium.
Finish
White, black or grey colour.
Reflector (Optic)
Asymmetric reflector with diffusers. Lux 700
1600
Electric 1400
1000
LED 600
400
200
Light source
LED 6W mm -200 -100 0 100 200 300 400 500 600 700
Mounting
147
Table clamp (included).
Alternative bases available on request.
132
222
Cable entry
Cable with plug-in power supply
delivered with fixture.
Termination
For connection to standard socket outlet.
Accessories
www.glamox.com/gmo
59
TEREA IP GLOBAL MARINE & OFFSHORE
Compact LED task light 20 LIGHTING SOLUTIONS
Application
LED task light with single arm
construction 470 mm.
Also available as wall version.
Design
Designed for small work areas and
computer workstation lighting.
Housing
Housing in aluminium.
Finish
White, alu grey or black colour.
158
Lux
Reflector (Optic) 1600
Asymmetric reflector with diffuser. 1400
470
1200
Electric 1000
Electronic driver. 800
600
LED 200
0 55
Light source mm 0 100 300 500 700 900 1100
LED 7W
Mounting
Table base (included).
Alternative bases and wallbracket
available on request.
Cable entry
Cable with plug-in power supply
delivered with fixture.
Termination
For connection to standard socket outlet.
60
NINETY IP GLOBAL MARINE & OFFSHORE
Energy efficient task light 20 LIGHTING SOLUTIONS
Application
LED task light.
Also available as wall version.
Design
Dimmable LED task light with unique design.
Housing
Housing in aluminium.
Finish
White, black or grey colour.
Reflector (Optic)
Asymmetric lens system.
Lux
1600
Electric
(14 2/3”)
1400
Electronic driver. 1200
1000
374
Lamp base 800
LED 6W 600
400
Light source 200
LED 6W 0
mm 0 100 300 500 700 900 1100
Mounting
Table clamp (included).
(22”)
Alternative bases and brackets
561
available on request.
Cable entry
Cable with plug-in power supply
delivered with fixture.
Termination
For connection to standard socket outlet.
Accessories
www.glamox.com/gmo
61
AIR LED IP GLOBAL MARINE & OFFSHORE
LED task light 20 LIGHTING SOLUTIONS
Application
LED task light with two different arm
length, 600 and 800 mm.
Wall version is terminated.
Design
Air task light is using the
latest LED technology.
Housing
Housing in aluminium.
Finish
White, black or grey colour.
600/800
Lux
Pane (Diffuser) 1600
Lens 1400
160
1200
600
Electric 400
0
Lamp base mm 0 100 300 500 700 900 1100
LED
Accessories
62
LFM IP GLOBAL MARINE & OFFSHORE
Magnifier with high impact strength 20 LIGHTING SOLUTIONS
Application
Magnifier with spring balanced
arm 1040 mm.
Design
LFM is designed to fit industrial,
low vision and domestic use.
Housing
Lamp housing in plastic with
spring balanced arm.
Finish
White and grey.
Mounting
1040
Pane Table clamp (included).
Magnification lens. Alternative brackets and trolley 265
Electric
Magnetic ballast
Lamp base
G10q
Light source
FC-E 22W
Accessories
www.glamox.com/gmo
63
CIRCUS IP GLOBAL MARINE & OFFSHORE
Magnifier for clinics and laboratories 20 LIGHTING SOLUTIONS
Application
Magnifier with spring balanced
arm 1000 mm.
Design
Circus is the most advanced illuminated
magnifier on the market.
Housing
Lamp housing in aluminium with fully
covered spring balanced arm.
Finish
White
Light source 1000
330
Lamp base
2GX13
Accessories:
www.glamox.com/gmo
65
LHH LED IP GLOBAL MARINE & OFFSHORE
Flexible examination luminaire 20 LIGHTING SOLUTIONS
Application
Examination lamp with spring
balanced arm 1040 mm.
Available for table, trolley,
wall or ceiling mounting.
Design
LHH LED is designed especially for medical
examination and minor procedures.
Housing
Lamp housing die cast aluminium
with spring balanced arm.
Finish Mounting
White Table clamp (included). 1040
Alternative brackets and trolley 190
Reflector (Optic) available on request.
LED lens system
Cable entry
Electric Cable and plug delivered with fixture.
Electronic driver
Termination
Lamp base For connection to standard socket outlet.
LED
Light source
LED 15W
Accessories
66
HS CHART LAMP IP GLOBAL MARINE & OFFSHORE
Chart table lamp 20 LIGHTING SOLUTIONS
• Gooseneck
• Hinged light head available
• Robust design and simple adjustment
Application
Flexible lamp for lighting of chart table or
precision working areas that need light
without interruption of surroundings.
Design
Robust design for marine and
industrial work-space lighting.
Housing
500 mm gooseneck (flexible arm) with HS 500
fix or hinged lamp head as standard.
700 mm length available on request.
Finish Mounting
Black colour Desk mounted by 4 screws (included).
Diffuser Cable
Clear glass diffuser. Supplied with 2 m cable.
Red coloured glass available as accessory.
Remarks
Reflector IP20 as standard, IP65 available on request HS 500 w/ HS 500 hinged
Aluminium symmetrical reflector. 230V transformer available as accessories. integrated w/ integrated
transformer transformer
Electric
On/off switch in fixing base
12V or 24V 20W QT9 lamp.
Lamp is included.
Lamp Base
G4
Accessories Part-No.
www.glamox.com/gmo
67
© Polarcus Limited
Technical Lighting
Outdoor/Indoor IP-54-68
Outdoor/Indoor IP54-68
Watertight product overview......... 71
MIR T8 IP66/67........................ 72
MIR T8 IP54.............................. 74
1044...................................... 76
1444......................................... 78
Watertight product MIR T8 IP66/67 MIR T8 IP54 1044 1444 1445 1448
overview Page 72 Page 74 Page 76 Page 78 Page 80 Page 82 1445.........................................80
Page 71 1448...................................... 82
0044...................................... 84
1888/1889.............................. 86
GRMB..................................... 88
0673 . ......................................90
1961....................................... 92
1997...................................... 94
0044 1888/1889 GRMB 0673 1961 1997 1986
Page 84 Page 86 Page 88 Page 90 Page 92 Page 94 Page 96 1986...................................... 96
1771...................................... 98
225
Ø10.5
1891..................................... 100
200
MIL....................................... 102
15.5
Range of optional suspension
possibilities............................... 105
69
High quality marine luminaires
Watertight product overview
Standard version
IP54 •
IP55 • • • •
IP66/67 • • • • • • •
Aluzink • •
Zink coated steel • • • • • •
Stainless steel AISI 304 •
Stainless steel AISI 316 • • • • •
Emergency with built in battery • • • •
Emergency with external battery • •
Cable entry M20 polyamid • • • • • • • •
Cable entry M25 brass •
Cable entry M24 • • • •
Through wiring 5 x 2.5 mm2 • • •
Springloaded lamp holders • •
Diffuser, polycarbonate • • • • • • • •
Terminal block 5 x 6 mm2 5 x 6 mm2 3 x 6 mm2 3 x 6 mm2 3 x 6 mm2 3 x 6 mm2 3 x 6 mm2 5 x 6 mm2
Some of these options can not be combined with other options, e.g. electronic and magnetic ballast or Aluzink and Stainless steel.
www.glamox.com/gmo
71
MIR T8 IP66/67 Ta Ta IP IP
High quality marine luminaire -30° 50° 66 67
• Easy maintenance
• Spring loaded (vibration safe) lampholders
• Emergency versions
Application
For mounting indoor and outdoor.
Design
According to maritime requirements.
Housing
Deep drawn acid proof stainless
steel (AISI 316L) for outdoor marine
environment (MIRS). IP66/67
Variants in Aluzink (MIRZ) for indoor
environments (also IP54). White painted
hinged geartray covering all components.
More variants are available on request. Complete assortment on www.glamox.com/gmo. Nemko ENEC NO1973, Ta=-30ºC to +50°C
MIRS = Stainless steel housing, 67 = IP66/67. M20 = Cable gland polyamide M20, B25 = Cable gland brass M25
Part-No. Part-No. Part-No. L1 C1 L C Weight Lamp Lamp
Product
F 230/50 F 230/60 HF mm mm mm mm kg Code Base
MIRS67 218 TW PC M20 012065 004854 MIR043059 724 704 681 430 4.5 T26 (T8) G13
MIRS67 236 TW PC M20 013114 005806 MIR040886 1334 1314 1291 950 7.5 T26 (T8) G13
MIRS67 218 TW PC B25 015199 MIR029228 724 704 681 430 4.5 T26 (T8) G13
MIRS67 236 TW PC B25 005058 012068 MIR016760 1334 1314 1291 950 7.5 T26 (T8) G13
MIRS67 218 -E3/S TW PC M20 MIR038229 MIR038972 MIR037960 724 704 681 430 5.0 T26 (T8) G13
MIRS67 236 -E1/S TW PC M20 MIR042847 MIR047084 MIR043457 1334 1314 1291 950 8.0 T26 (T8) G13
72
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable gland
Ballast
Lamp holder
12104403
Battery
PA990529009 (8,4V)
PA990529004 (4,8V) Diffuser
485120067 (18W)
485140067 (36W)
Lamp holder
12104402
165
165
60
85
L1 L
C1 C 50
111
128
115
L1 + 134 150
C1 + 134
124
Measurements are in mm
www.glamox.com/gmo
73
MIR T8 IP54 Ta Ta IP
High quality marine luminaire -30° 50° 54
• Easy maintenance
• Spring loaded (vibration safe) lampholders
• Emergency versions
Application
For mounting indoor and outdoor.
Design
According to maritime requirements.
Housing
Housing in Aluzink (Z) for non-corrosive
environments. Variants in deep drawn
acid proof stainless steel (AISI 316L) for
outdoor marine environment (MIRS) also
available (also IP66/67). White painted
hinged geartray covering all components.
Finish Mounting
Powder coated white RAL9016 in To be mounted on ceiling, cable trays or
gloss 90 for easy maintenance. brackets welded to building construction.
Fixed end brackets as standard. M8 hood
Diffuser nuts for fixing of alternative suspension system
Diffuser in moulded impactproof UV- (triangle, shock-absorber etc) available
resistant polycarbonate (PC). Gasket in on request, see pages 108 and 109.
polyurethane foam moulded into the diffuser. Hinged geartray Battery box
Cable entry
Electric One cable gland and one blind
With magnetic ballasts and capacitor plug each end. Other gland
(F) or electronic ballast (HF). configurations also available.
Emergency versions with integral battery
(Ta=25ºC) or battery in external box at end Termination
of fixture, 1 or 3 hours emergency lighting. One 5-way screw terminal 6 mm²
All components are mounted on a hinged each end. Fixed bracket
geartray. Quick connector on gear Through wiring (TW) 5 x 2.5 mm²
connection cables for easy maintenance.
Remarks
Lamp base Variants with external connection
G13 spring operated lamp holders. box and variants with light sources
installed available on request.
Light source
Two tubes T26 (T8), 18 or 36W.
More variants are available on request. Complete assortment on www.glamox.com/gmo. Nemko ENEC NO1973, Ta=-30ºC to +50°C
MIRZ = Aluzink steel housing, 54 = IP54. M20 = Cable gland polyamide M20
Part-No. Part-No. Part-No. L1 C1 L C Weight Lamp Lamp
Product
F 230/50 F 230/60 HF mm mm mm mm kg Code Base
MIRZ54 218 TW PC M20 004945 MIR018561 MIR036546 724 704 681 430 4.8 T26(T8) G13
MIRZ54 236 TW PC M20 004738 MIR018559 MIR037620 1334 1314 1291 950 7.5 T26(T8) G13
MIRZ54 218 -E3/S TW PC M20 011904 MIR038220 MIR039605 724 704 681 430 5.3 T26(T8) G13
MIRZ54 236 -E1/S TW PC M20 MIR040781 MIR047083 MIR037852 1334 1314 1291 950 8.0 T26(T8) G13
74
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable gland
Ballast
Lamp holder
12104403
Battery
PA990529009 (8,4V)
PA990529004 (4,8V) Diffuser
485120067 (18W)
485140067 (36W)
Lamp holder
12104402
165
165
60
85
L1 L
C1 C 50
111
128
115
L1 + 134 150
C1 + 134
124
Measurements are in mm
www.glamox.com/gmo
75
1044 IP IP
Multipurpose luminaire surface 55 67 GL
Application
For workshops, engine rooms and stores.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet deep drawn.
Finish
Powder coated white RAL9016 and
enamelled up to 70-80 µm thickness.
Diffuser Mounting
Clear polycarbonate, others on request. To be mounted with 2 holes, Ø13 mm
or preinstalled threaded bushing.
Electric
With magnetic ballast, low or high Cable entry
power factor, as standard; electronic 1 or 2 glands at each end M20/
ballast available. Flexible wiring heat M24 x 1.5 MGG/MGCG or
resistant up to 105°C; removable connection box with up to 4 glands.
gear tray with plug-in connector to the
housing. Through wiring available. Termination
Terminal 3-pole/6 mm².
Lamp base
G13 Remarks
Standard variations e.g. connection
Light source box, HF-ballast on request.
Designed for two T8 (T26) fluorescent
lamps in 18 or 36W (not included).
76
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840033400 (2 pcs)
To be
ordered 9840045500 (6 pcs)
separately
To be
ordered
separately
9840033300 (5 pcs)
9840094000 stainless steel (4 sets)
9840083200 polyacetate (10 sets) 9840033200 (5 pcs)
See table
H 83 mm, 18W 9840005300
H 83 mm, 36W 9840005600
H 58 mm, 18W 9840039200
H 58 mm, 36W 9840039600
652 192
430 135
18W
56
109
275
275
692 350
1300 150
950 92
36W
56
109
275
275
1340 300
Measurements are in mm
www.glamox.com/gmo
77
1444 IP IP
Multipurpose luminaire surface 55 67
Application
For workshops, engine rooms,
stores and passage ways.
Design
According to rules of maritime classifcation
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel or stainless steel
AISI 316 sheet deep drawn.
Finish
Powder coated white RAL9016 and
enamelled up to 70-80 µm thickness. Mounting
To be mounted with 2 holes, Ø13 mm
Diffuser or preinstalled threaded bushing.
Clear polycarbonate, others on request.
Cable entry
Electric 1 or 2 glands at each end M20/M24 x
With magnetic ballast, low or high 1.5 MGG/MGCG or connection box
power factor, as standard; electronic with up to 4 glands. Standard glands
ballast available. Flexible wiring heat are available in polyamide or brass.
resistant up to 105°C; removable
gear tray with plug-in connector to the Termination
housing. Through wiring available. Terminal 3-pole/6 mm².
78
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840033400 (2 pcs)
To be
ordered 9840045500 (6 pcs)
separately
To be
ordered
Please sepcify cpl. separately
part. no. of luminaire
9840033300 (5 pcs)
9840094000 stainless steel (4 sets) 9840033200 (5 pcs)
9840083200 polyacetate (10 sets)
1/2 x 18W
652 192
430 135
56
109
275
275
692 350
1/2 x 36W
1300 150
950 92
56
109
275
275
1340 300
Measurements are in mm
www.glamox.com/gmo
79
1445 IP IP
Multipurpose luminaire surface with LEDs 55 67
• LED technology
• Low power consumption
• Easy maintenance
Application
For workshops, stores, holds,
passage ways, etc.
Design
According to rules of maritime classifcation
societies, additional VDE and IEC/EN
Housing
Zinc coated steel sheet or
stainless steel (AISI 316)
Gear tray
Powder coated aluminium
Also available:
Finish - LED 2x15W/ 2820lm
Powder coated white RAL 9016 and - LED 2x20W/ 3660lm
enamelled up to 70-80µm thickness - LED 2x30W/ 5640lm
Diffuser Mounting
Clear or opal polycarbonate To be mounted with 2 holes, Ø13 mm
or preinstalled threaded bushing 1445 with 1445 with
Electric opal cover fixing brackets
Flexible and halogen free wiring, Cable entry
heat resistant up to 105°C 2xM24x1.5 brass D10-12.5 mm MGCG
Replacement kit
80
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840070900
(10 pcs)
9840125000 (6 pcs)
984014000
9840249100
(2 pcs)
8144550100
9840053900 (5 pcs)
Geartray cpl.
9840039200=clear
9840039400=opal
Measurements are in mm
www.glamox.com/gmo
81
1448 IP
Multipurpose luminaire surface 67
Application
For workshops, engine rooms, stores,
holds and passage ways etc.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet, deep drawn
housing in stainless steel AISI 316 available.
Finish
Powder coated white RAL9016 and
enamelled up to 70 - 80 µm thickness. Mounting
To be mounted with 2 holes Ø13 mm;
Diffuser preinstalled threaded bushing
Clear polycarbonate. or fixed end brackets.
Light source
Designed for two T5 (T16) fluorescent
lamp 8W (not included)
or LED 9 x 1W (included).
82
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
To be
ordered
separately
9840114700 (6 pcs)
9840076600 (5 pcs)
9840158500 (5 pcs)
See table
9840135300
347 165
186 115
55
105
275
275
379 300
Measurements are in mm
www.glamox.com/gmo
83
0044 IP IP
Multipurpose luminaire surface 55 67
• Slim design
• Deep drawn steel housing
• Watertight luminaire for
various applications
Application
For workshops, engine rooms, stores,
holds and passage ways etc.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet, deep drawn;
housing in stainless steel AISI 316 available.
Finish
Powder coated white RAL9016 and
enamelled up to 70 - 80 µm thickness. Mounting
To be mounted with 2 holes, Ø13 mm
Diffuser or preinstalled threaded bushing.
ClearPolycarbonate clear.
Cable entry
Electric 1 or 2 glands at each end M20/M24 x
With magnetic ballast, low or high 1.5 MGG/MGCG or connection
power factor, as standard; electronic box with up to 4 glands.
ballast available. Flexible wiring
heat resistant up to 105°C. Termination
Terminal 3-pole/6 mm².
Lamp base
G13 Remarks
Special variations on request.
Light source
Designed for two T8 (T26) fluorescent
lamp 18W (not included).
84
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
To be
ordered 9840045500 (6 pcs)
separately
To be
Please sepcify cpl. ordered
part. no. of luminaire separately
9840033400 (2 pcs)
9840033200 (5 pcs)
9840094000 stainless steel (4 sets)
9840083200 polyacetate (10 sets)
9840033300 (5 pcs)
9840029600
See table
150
692 132
652
92
5
109
275
275
695 300
Measurements are in mm
www.glamox.com/gmo
85
1888/1889 IP
Multipurpose luminaire 55
• Smooth design
• Easy to clean
• Continuous mounting
Application
For workshops, engine rooms,
stores, holds and galleys etc.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet, deep drawn.
Gear tray
Zinc coated steel sheet.
Finish Mounting
Powder coated white RAL9016 and To be mounted with 2 holes, Ø13 mm
enamelled up to 70-80 µm thickness. or preinstalled threaded bushing.
Electric Termination
With magnetic ballast, low or high Terminal 3 pole/6 mm².
power factor, as standard; electronic
ballast available. Flexible wiring heat Remarks
resistant up to 105°C; easy clip-in- For 1888 short-dated delivery of
system for removable gear tray with luminaires with standard variations.
plug-in connector to the housing. For 1889 special variations on request.
Lamp base
G13
Light source
Designed for one or two T8 (T26) fluorescent
lamps 18W or 36W (not included).
86
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
To be To be ordered separately
ordered
separately
9840033400 (2 pcs)
9840033300 (5 pcs)
18W 9840072800
36W 9840072900
9840077400 (6 sets)
Measurements are in mm
www.glamox.com/gmo
87
GRMB Ta IP IP ABS
Luminaire for industrial and marine installations 45° 66 67
Application
For mounting indoor and outdoor
Design
According to maritime requirements
Housing
Housing in deep drawn stainless steel
(AISI 304L) (S) or galvanized steel (G).
White painted cover plate between
components and light sources.
Finish
Powder coated white RAL9016
Light source
Two tubes T26 (T8), 18 or 36W
Mounting
To be mounted on ceiling, cable trays or
brackets welded to building construction
88
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Measurements are in mm
www.glamox.com/gmo
89
0673 IP 68
Pressure watertight luminaire 20m
Application
For decks and deck rails.
Design
According to rules of relevant classification
societies, additional VDE and IEC.
Gear tray
Zinc coated steel sheet.
Finish
Powder coated white RAL9016 and
enamelled up to 70 - 80 µm thickness.
Diffuser Mounting
Clear polycarbonate cover tube, 4 mm Fixing by means of 2 clamps (not
thickness, polycarbonate end caps. included), have to be ordered separately,
see spare parts and accessories.
Electric
With magnetic ballast, low or high power Cable entry
factor, as standard; electronic ballast Polyamide gland
available. Heat resistant flexible wiring M20 x 1.5 (cable Ø6-12 mm)
up to 105°C, removable gear tray. M25 x 1.5 (cable Ø13-18 mm)
Accessories Part-No.
90
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840136800 8105400900
(1 set)
18W 9840136500
36W 9840136900
9840059100
(5 pcs.)
9840059200
(2 pcs.)
9840048500
(2 pcs.)
9840136700
Please specify Please specify (2 pcs.)
cpl. part no. of luminaire See table cpl. part no. of luminaire
1163
Ø70
LLP 590
1140
1773
Ø70
LLP 1200
1750
58
47 Ø70
152
Ø70 Ø70
130
102
85
30
85
46
Ø8.1 Ø10
Ø8.5
10 28 Ø10x14
78 35 35
Measurements are in mm
www.glamox.com/gmo
91
1961 IP
Galley luminaire 67 GL
• Easy to clean
• According to USPH
• Flat design
Application
For kitchens, galleys, pantries
and provision stores.
Design
According to rules of USPH (U.S.Puplic
Health) and to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Ground plate stainless steel AISI 316.
Gear tray zinc coated steel.
Finish
Gear tray: powder coated white RAL9016 Mounting
and enamelled up to 70-80 µm thickness. To be mounted with 6/8 holes, Ø5 mm.
Electric Termination
With magnetic ballast, high power Terminal 3-pole/2.5 mm².
factor, flexible wiring heat resistant up to
105°C; removable gear tray with plug in
connector to the terminal on ground plate.
Lamp base
G13
Light source
Designed for two T8 (T26) fluorescent
lamps in 18W or 36W (not included).
92
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840033400 (2 pcs)
9840033300 (5 pcs)
See table
9840033200 (5 pcs)
18W 9840069800
36W 9840107900
9840032900 (6 sets)
(cpl. with screws)
723 183
80
200
200
723 183
Ø5
110
25
275
560
1333 183
80
200
200
183
1333
Ø5
110
25
390
1170
Measurements are in mm
www.glamox.com/gmo
93
1997 IP
Circular luminaire 56
Application
For open decks.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Seawater resistant aluminium
or stainless steel.
Finish
1
Powder coated white RAL9016 and
enamelled up to 70-80 µm thickness.
Mounting
Diffuser To be mounted with 2 holes, Ø5 mm.
Opal polycarbonate/opal glass.
Cable entry
Electric 2 cable glands PG13.5, brass nickel plated.
With magnetic ballast high power factor,
flexible wiring heat resistant up to 105°C. Termination
Terminal 3-pole/6 mm. 4 2
Lamp base
E27/G24d-2
Light source
Designed for incandescent lamp max
75W or tubular compact fluorescent
lamps 18W (not included).
94
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Ø
D
Measurements are in mm
www.glamox.com/gmo
95
1984/1986 1986 IP
Step light 67
• Timeless design
• Stainless steel
• For energy saving lamps
Application
For steps and low location illumination.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Stainless steel.
Finish
All parts powder coated white RAL9016
and enamelled up to 70-80 µm thickness.
Diffuser Mounting
Clear polycarbonate. To be mounted with 4 holes, Ø4.0 mm.
Light source
TC tubular compact fluorescent
lamp 5/7W (not included).
96
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840053100 (5 pcs)
245
224 ~32 73
7
100
74
Hole Ø4
Measurements are in mm
www.glamox.com/gmo
97
1771 IP
Coldroom luminaire surface 67
• Easy to clean
• According to USPH
• Flat design
Application
For refrigerated areas, coldrooms and
freezing rooms; ambient temperature
min -40°C, max. +30°C.
Design
According to rules of USPH (U.S.Puplic
Health) and to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Ground plate stainless steel AISI 316.
Gear tray zinc coated steel.
Finish Mounting
Gear tray: powder coated white RAL9016 To be mounted with 6/8 holes, Ø5 mm
and enamelled up to 70-80 µm thickness.
Cable entry
Diffuser 2 cable glands PG13.5, brass nickel plated
Clear polycarbonate
Termination
Electric Terminal 3-pole/2.5 mm² 1771 with LED
With magnetic ballast, high power
factor, flexible wiring heat resistant up to Remarks
105°C; removable gear tray with plug in LED version available
connector to the terminal on ground plate.
Lamp base
G13
Light source
LED or two thermo tubes T38
fluorescent lamps in 18 or
36W (not included).
98
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840033400 (2 pcs)
9840084900
9840033300 (5 pcs)
See table
723 183
18W - T38
80
2x10 - LED
200
200
2x15 - LED
723
183
Ø5
110
25
275
560
1333 183
36W - T38
80
200
200
1333 183
Ø5
110
25
390
1170
Measurements are in mm
www.glamox.com/gmo
99
1891 IP
Coldroom luminaire surface 55
• Smooth design
• Easy to clean
• Continuous mounting
Application
For refrigerated areas, coldrooms and
freezing rooms; ambient temperature
min -40°C, max. +30°C.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet deep drawn.
Finish
Powder coated white RAL9016 and
enamelled up to 70 - 80 µm thickness. Mounting
To be mounted with 2 holes, Ø13 mm
Diffuser or preinstalled threaded bushing.
Clear polycarbonate, turn
buttons for quick mounting. Cable entry
Standard: 2 x M24 x 1.5 MGCG
Electric 10-12.5; through wiring
With magnetic ballast, high power factor, others on request e.g. M20,
flexible wiring heat resistant up to 105°C, M24 x 1.5 MGG.
easy clip-in system for removable gear tray
with plug-in connector to the housing. Termination
Terminal 3-pole 6 mm².
Lamp base
G13
Light source
Designed for two thermo tubes
T38 fluorescent lamps in 18 or
36W (not incuded).
100
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840084900
To be
ordered 9840033400 (2 pcs)
separately
To be
ordered
separately
9840033300 (5 pcs.)
430 140
46
105
200
200
651 150
950 140
46
105
200
200
1270 150
Measurements are in mm
www.glamox.com/gmo
101
MIL Ta IP IP
Luminaire for freezing and cold rooms 45° 66 67
Application
For mounting indoor and outdoor.
Design
According to maritime requirements.
Housing
MILS in deep drawn stainless steel (AISI 316)
for outdoor marine environment, or in Aluzink
steel (MILZ) for non corrosive environments.
Finish
Powder coated white RAL9016 in
gloss 90 for easy maintenance.
Mounting
Diffuser To be mounted on ceiling, cable trays or
Diffuser in moulded UV-resistant brackets welded to building construction.
polycarbonate (PC) with gasket in Fixed end brackets as standard. M8
polyurethane moulded into the diffuser. hood nuts for fixing of alternative
suspension system (triangle, shock-
Reflector (Optic) absorber etc) available on request.
White painted cover plate between Thermo tubes
components and light sources. Cable entry
One cable gland and one blind
Electric plug each end. Other gland
With magnetic ballasts and electronic cold configurations also available.
starters for ignition of lamps to -40ºC.
Termination
Lamp base One 5-way screw terminal 6 mm² each end.
G13 Through wiring (TW) 5 x 2.5 mm².
Light source
Two thermo tubes. To be delivered
installed or not, see table.
Accessories Part-No.
102
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable gland
see spare part list
Diffuser clamp PA980109005
Blind plug
see spare part list
Starter 14210400
Ballast
see spare part list
165
60
85
L1 L
C1 C
111
128
165
Measurements are in mm
www.glamox.com/gmo
103
Range of optional suspension possibilities
290
0
Ø2
Threaded bushing
21.5
39.5
Flat sealing ring
VG28
63.5
.5
10
Flat sealing
Ø
Threaded bushing
ring
Hexagon nut M13x1
65
Torque 25Nm
260 VG37
Ø10.5 7
VG40
VG02
VG43/VG74
VG07/VG18
40
225 Ø8 10
Ø
200
welded Welded
45
20
30
VG08/09
VG49
www.glamox.com/gmo
105
225
Hexagon screw M8x20
200 Torque 17Nm;
fixed with screw lock fluid
76.5
20
VG68
VG55
Hexagon screw M8x20
Torque 17Nm;
280 locked with screwlock glue
Washer Ø8.4 105
132.5
22
21.5
Threaded bushing
VG57
VG70/VG71
Threaded bushing
Threated bushing M8/M13
VG61
VG72
VG73
VG62
VG63
VG75
106
Range of optional suspension possibilities
M38x1.5
62
Ø
21
5
134
45º
,50º
VG11 Universal
M8 bolt
M8 bolt Triangel
L-end Vibration
www.glamox.com/gmo
107
Emergency light sign/escape
Indoor IP20-44
E80-R (M)................................110
E80-S.....................................112
E85-R (M)................................114
E85-S.....................................116
1927........................................119
E80-R (M) E80-S E85-R (M) E85-S 1927
Page 110 Page 112 Page 114 Page 116 Page 119
OUTDOOR/Indoor IP54-68
0631 Illuminated Sign............... 120
GEF...................................... 121
1303/04/06.......................... 122
109
E80-R (M) IP Ta DNV B0 B15
EXIT sign recessed 20 45°
• LED
• Signs according to ISO 7010
• Aluminium housing
Application
For escape routes and directory signage
Design
DNV approved design according to
maritime classification societies,
additional IEC/ISO.
Housing
Die casted aluminium, recessed mounted,
component plate in steel.
Finish
Housing white powder coated RAL9016
Light source
Sign LED
Polycarbonate with symbol inside visible
from both sides. Mounting
Signs for 20 metres reading distance 10x26. To be fixed with 4 screws
Option for 30 metres reading
distance 15x26. Cable entry
Signs delivered with luminaire. Back plate with double grommet and
2 knockouts, one each side.
Electric
Electronic ballast 220-240V, 50-60Hz. Termination
Delivered with 1 (E1) or 3 hour (E3) 5x2x2.5 mm² push in terminal
with integrated battery.
Option for centralized battery 230V (Z)
S = Standard
ST = Selftest
DALI = address able system
Z = 230V central battery system
110
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Strain relief
Cable clamps
Battery clamp
Battery Gear tray
LED strip
Sign
Front cover
Fixing screws
61x328
320
160 53
53
352 93
112/162
160
Measurements are in mm
www.glamox.com/gmo
111
E80-S IP Ta DNV
EXIT sign surface 20 45°
• LED
• Signs according to ISO 7010
• Aluminium housing
Application
For escape routes and directory signage
Design
DNV approved design according to
maritime classification societies,
additional IEC/ISO.
Housing
Die casted aluminium surface mounted,
component plate in polycarbonate
Finish
Housing white powder coated RAL9016
Light source
Sign LED
Polycarbonate with symbol inside visible
from both sides. Mounting
Signs for 20 metres reading distance 10x26. To be fixed with two screws
Option for 30 metres reading
distance 15x26. Cable entry
Signs delivered with luminaire. 2 holes on top for max. cable Ø15 mm. Flag mounting Wall mounting
At sides two knockouts, one each side
Electric for max. cable Ø13 mm
Electronic ballast 220-240V, 50-60Hz.
Delivered with 1 (E1) or 3 hour (E3) Termination
integrated battery. 5x2x2.5 mm² push in terminal
Option for centralized battery 230V (Z)
S = Standard Accessories
ST = Selftest Wall bracket or flag bracket to be
DALI = address able system ordered separately
Z = 230V central battery system
112
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Gear tray
Quick connection LED supply
Quick connection LED supply
LED driver
Battery
Fixing bracket
Heat sink
Terminal block
LED strip
Sign
Front cover
Fixing screws
317
56
170/220
104/154
158
25
291
Measurements are in mm
www.glamox.com/gmo
113
E85-R (M) IP Ta DNV
Escape route recessed 20 45°
• LED
• Especially designed for corridors = C
• Especially designed for open areas = WB
Application
For escape route or anti panic lighting
Design
DNV approved design according to
maritime classification societies,
additional IEC/ISO
Housing
Die casted aluminium recessed mounted, E85-R (M) C
component plate in steel
Finish
Housing white powder coated RAL9016
Cable entry
Optic Back plate with double grommet
Corridor C or Wide beam WB and 2 knockouts, one each side
for anti panic lighting
Termination
Electric 5x2x2.5 mm² push in terminal
Electronic ballast 220-240V, 50-60Hz.
Delivered with 1 (E1) or 3 hour (E3) E85-R (M) WB
integrated battery.
Option for centralized battery 230V (Z)
S = Standard
ST = Selftest
DALI = address able system
Z = 230V central battery system
Light source
LED
Mounting
To be fixed with 4 screws
114
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Main body
Battery
LED driver
Cable clamp
Strain relief
Fixing screws gear tray
Gear tray
Front cover
Reflector
125x158
148
120
45
8
55
174 155
74
Measurements are in mm
www.glamox.com/gmo
115
E85-S IP Ta DNV
Escape route surface 20 45°
• LED
• Especially designed for corridors = C
• Especially designed for open areas = WB
Application
For escape route or anti panic lighting
Design
DNV approved design according to
maritime classification societies,
additional IEC/ISO
Housing E85-S C
Die casted aluminium surface mounted,
component plate in polycarbonate
Finish
Housing white powder coated RAL9016
Mounting
Optic To be fixed with two screws
Corridor C or Wide beam WB
for anti panic lighting Cable entry
Back plate slot for 2 cables max.
Electric Ø15 mm and one knockout each end
Electronic ballast 220-240V, 50-60Hz.
Delivered with 1 (E1) or 3 hour (E3) Termination E85-S WB
integrated battery. 5x2x2.5 mm² push in terminal
Option for centralized battery 230V (Z)
S = Standard
ST = Selftest
DALI = address able system
Z = 230V central battery system
Light source
LED
116
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Spare Spare
Parts/ Parts/
Accessories
Accessories
Battery
LED driver
Terminal block
Front cover
Fixing screws
Reflector
118 153 54
Max 100
Min 45
59
77
Measurements are in mm
www.glamox.com/gmo
117
1927 IP GLOBAL MARINE & OFFSHORE
EXIT sign recessed 20 LIGHTING SOLUTIONS
• Decorative design
• Flexible cover
• Easy mounting
Application
For escape routes and directory signage.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet.
Finish
Powder coated white and enamelled
up to 70-80 µm thickness.
58
brass/RAL9016 white.
Cable entry
80
Sign 2 grommets for max. cable Ø11 mm.
Sign of two plates with symbol in- 7
198 103
between legible from both sides. Termination 214
Printing to customer´s specification. Terminal 3-pole/6 mm².
After installation of the luminaire casing,
~4
the sign plate is mounted by simply Remarks
snapping it into the luminaire cover. Signs have to be ordered separately
92
Lamp base
G23
Light source
TC tubular compact lamp 7W (not included).
www.glamox.com/gmo
119
0631 IP IP
EXIT sign recessed 20 65 GL GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Application
For escape routes and directory signage.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel sheet.
Finish
Powder coated white and enamelled
up to 70-80 µm thickness.
114
plastic
Termination
Hole Ø4.5
Sign Terminal 3-pole/6 mm².
75
Sign of two plates with symbol in- 350
160
142 ±0.5
Drill diagram/Ceiling cut out
Bohurngsmaße/Deckenausschnitt
132
Electric
150
Flexible wiring heat resistant up to 105°C.
300 ±0.5
Battery back-up type available with
integrated high temperature Ni-Cd battery
set for 3h emergency operation.
Lamp base
G23/2G7
Light source
Tubular compact lamp 7W (not included).
Mounting
To be mounted with 4 holes, Ø4.8 mm.
120
GEF IP GLOBAL MARINE & OFFSHORE
Exit sign and route lighting 65 LIGHTING SOLUTIONS
Application
Sign and route lighting luminaire
with 3 hour battery backup.
Design
Modern design according to
rules of maritime classification
societies and IEC standards.
Electronic
Electronic ballast 230V 50/60Hz and
emergency driver for system solutions.
S = Standard
ST = Self-test
LED indicator for charging
Lamp base
G5
GEF Double
Light sources
T16 8W
Mounting
Surface mounted wall or ceiling. 323 78
355
Cable entry 300 95
136
100
280
Termination
4 pole screw terminal block.
Max 2.5 mm² cable. SINGLE DOUBLE
www.glamox.com/gmo
121
1303/04/06 IP
Emergency luminaire 30
Application
For accommodation areas, public
areas and passage ways.
Design
According to rules of maritime classification
societies, additional VDE and IEC/EN.
Housing
Zinc coated steel (type 1306)
Stainless steel AISI 316 (type 1303/04)
Finish
Zink coated steel version powder
coated white RAL9016 and enamelled Mounting
up to 70-80 µm thickness. To be mounted with 2/3
holes, Ø4.5/5 mm.
Diffuser
Opal polycarbonate. Cable entry
Knockout opening/2 grommets.
Electric
Flexible wiring, silicone insulated Termination
and heat resistant up to 180°C. Terminal 2-pole/6 mm².
Lamp base
E14/B15/E27/B22
Light source
Incandescent lamp 15W (not included).
122
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
20.5
48
122
115 Ø152 Ø152
70
Ø145 Ø145
40
42
200
200
200
Ø4.5 Ø4.5
35
2 5
Ø1 Ø137 Ø
Ø112
107
40 54 120º
55 70
35 45º
Measurements are in mm
www.glamox.com/gmo
123
Technical Lighting Ex
ZONE 1
TX20-R SL/CL.......................... 128
TX20-R SL/GL.......................... 130
TX20-R MP/CL......................... 132
TX20-R MP/GL........................ 134
TX20-S SL/CL.......................... 136
TX20-R SL/CL TX20-R SL/GL TX20-R MP/CL TX20-R MP/GL TX20-S SL/CL TX20-S SL/GL TX20-S MP/CL
Page 128 Page 130 Page 132 Page 134 Page 136 Page 138 Page 140 TX20-S SL/GL......................... 138
TX20-S MP/CL......................... 140
TX20-S MP/GL........................ 142
GRX3 LL................................. 144
GRX3 DP3.............................. 146
MAX..................................... 148
MAX ICE.................................. 150
TX51..................................... 152
TX20-S MP/GL GRX3 LL GRX3 DP3 MAX MAX ICE TX51 0272
Page 142 Page 144 Page 146 Page 148 Page 150 Page 152 Page 154 0272.................................... 154
0285.................................... 156
GTX...................................... 158
1826.................................... 160
3312 Brass Fixture.................... 162
505 Brass Fixture.................... 163
ZONE 2
1744..................................... 166
MIX....................................... 168
1744 MIX
Page 166 Page 168
125
Technical Lighting Ex
Zone 1
ZONE 1
TX20-R SL/CL.......................... 128
TX20-R SL/GL.......................... 130
TX20-R MP/CL......................... 132
TX20-R MP/GL........................ 134
TX20-S SL/CL.......................... 136
TX20-R SL/CL TX20-R SL/GL TX20-R MP/CL TX20-R MP/GL TX20-S SL/CL TX20-S SL/GL TX20-S MP/CL
Page 128 Page 130 Page 132 Page 134 Page 136 Page 138 Page 140 TX20-S SL/GL......................... 138
TX20-S MP/CL......................... 140
TX20-R MP/GL........................ 142
GRX3 LL................................. 144
GRX3 DP3.............................. 146
MAX..................................... 148
MAX ICE.................................. 150
TX51..................................... 152
TX20-S MP/GL GRX3 LL GRX3 DP3 MAX MAX ICE TX51 0272
Page 142 Page 144 Page 146 Page 148 Page 150 Page 152 Page 154 0272.................................... 154
0285.................................... 156
GTX...................................... 158
1826.................................... 160
3312 Brass Fixture.................... 162
505 Brass Fixture.................... 163
127
TX20-R SL/CL IP
Interior fixture for hazardous area, Zone 1 55
Application
Interior lighting fixture for
hazardous area, Zone 1.
Design
Modern design according to
rules of maritime classification
societies and IEC standards .
Housing
Painted steel.
Finish
Powder coated white RAL9016.
Mounting
Optic Recessed for most type of marine
High efficient softlight MIRO optic type ceilings. Suspension rails included.
(SL) with polycarbonate cover (CL).
Cable entry
Electric Through connection box on top
Delivered with electronic ballast, HF, 2 x M25 brass cable glands.
HF E1/S, with 1.5 hour emergency, Hinged diffuser Glass suction pad
HF E3/S, with 3 hours emergency. Termination
Variants with Self Test of emergency 6 pole terminal block. Max 6 mm² cable.
function available on request.
Lamp base
G5
Light source
Two tubes T16 (T5) 14 or 28W.
More variants are available on request. Nemko 09ATEX1224X II2G Ex d e mb IIC T4 Ta-25 up to +25/+40/+45ºC
Complete assortment on www.glamox.com/gmo.
840=with 840 lamp included, FB=2xM25 brass cable glands.
Part-No. Part-No. Part-No. B B1 L L1 C C1 Lamp Ta
Product
HF HF E1/S HF E3/S mm mm mm mm mm mm Code ºC
TX20-RS3 214 FB 840 SL/CL TX20065442 TX20065448 TX20065454 275 258 614 575 75 410 T16(T5) 45
TX20-RS3 228 FB 840 SL/CL TX20065443 TX20065449 TX20065455 275 258 1214 1175 75 1010 T16(T5) 40
TX20-RC3 214 FB 840 SL/CL TX20065444 TX20065450 TX20065456 282 258 614 575 75 410 T16(T5) 45
TX20-RC3 228 FB 840 SL/CL TX20065445 TX20065451 TX20065457 282 258 1214 1175 75 1010 T16(T5) 40
TX20-RC4 314 FB 840 SL/CL TX20065446 TX20065452 TX20065458 357 333 614 575 150 410 T16(T5) 45
TX20-RT6 314 FB 840 SL/CL TX20065447 TX20065453 TX20065459 597 333 597 575 150 410 T16(T5) 45
Accessories Part-No.
RS3 = Shadow panel ceiling, 300mm width. RC3/RC4 = Concealed modular ceiling or solid ceiling(3=282mm and 4=357mm frame) . RT6=T-profile ceiling 600mm width.
128
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable glands
Ballast
Terminal block for battery
Charging indicator
Microswitches
Suspension rail
Terminal block EX
Light tubes
Battery unit
B1 + 10
L1 + 20
L
137 C1
B1
B
C
L1
Measurements are in mm
www.glamox.com/gmo
129
TX20-R SL/GL IP
Interior fixture for hazardous area, Zone 1 55
Application
Interior lighting fixture for
hazardous area, Zone 1.
Design
Modern design according to
rules of maritime classification
societies and IEC standards.
Housing
Painted steel.
Finish
Powder coated white RAL9016.
Mounting
Optic Recessed for most type of marine
High efficient softlight MIRO optic type ceilings. Suspension rails included.
(SL) with hardened glass cover (GL).
Cable entry
Electric Through connection box on top
Delivered with electronic ballast, HF, 2 x M25 brass cable glands.
HF E1/S, with 1.5 hour emergency, Hinged diffuser Glass suction pad
HF E3/S, with 3 hours emergency. Termination
Variants with Self Test of emergency 6 pole terminal block. Max 6 mm² cable.
function available on request.
Lamp base
G5
Light source
Two tubes T16 (T5) 14 or 28W.
More variants are available on request. Nemko 09ATEX1224X II2G Ex d e mb IIC T4 Ta-25 up to +25/+40/+45ºC
Complete assortment on www.glamox.com/gmo.
840=with 840 lamp included, FB=2xM25 brass cable glands.
Part-No. Part-No. Part-No B B1 L L1 C C1 Lamp Ta
Product
HF HF E1/S HF E3/S mm mm mm mm mm mm Code ºC
TX20-RS3 214 FB 840 SL/GL TX20065460 TX20065466 TX20065472 275 258 614 575 75 410 T16(T5) 45
TX20-RS3 228 FB 840 SL/GL TX20065461 TX20065467 TX20065473 275 258 1214 1175 75 1010 T16(T5) 40
TX20-RC3 214 FB 840 SL/GL TX20065462 TX20065468 TX20065474 282 258 614 575 75 410 T16(T5) 45
TX20-RC3 228 FB 840 SL/GL TX20065463 TX20065469 TX20065475 282 258 1214 1175 75 1010 T16(T5) 40
TX20-RC4 314 FB 840 SL/GL TX20065464 TX20065470 TX20065476 357 333 614 575 150 410 T16(T5) 45
TX20-RT6 314 FB 840 SL/GL TX20065465 TX20065471 TX20065477 597 333 597 575 150 410 T16(T5) 45
Accessories Part-No.
RS3 = Shadow panel ceiling, 300 mm width. RC3/RC4 = Concealed modular ceiling or solid ceiling (3=282 mm and 4=357 mm frame). RT6=T-profile ceiling 600 mm width.
130
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable glands
Ballast
Terminal block for battery
Charging indicator
Microswitches
Suspension rail
Terminal block EX
Light tubes
Battery unit
B1 + 10
L1 + 20
L
137 C1
B1
B
C
L1
Measurements are in mm
www.glamox.com/gmo
131
TX20-R MP/CL IP
Interior fixture for hazardous area, Zone 1 55
Application
Interior lighting fixture for
hazardous area, Zone 1.
Design
Modern design according to
rules of maritime classification
societies and IEC standards .
Housing
Painted steel.
Finish
Powder coated white RAL9016.
Mounting
Diffuser Recessed for most type of marine
Micro-prismatic plastic (MP) that gives ceilings. Suspension rails included.
a pleasant diffused light illumination.
With polycarbonate cover (CL). Cable entry
Through connection box on top
Electric 2 x M25 brass cable glands.
Delivered with electronic ballast, HF, Connection box Cable entry
HF E1/S, with 1.5 hour emergency, Termination
HF E3/S, with 3 hours emergency. 6 pole terminal block. Max 6 mm² cable.
Variants with Self Test of emergency
function available on request.
Lamp base
G5
Light source
Two tubes T16 (T5) 14 or 28W.
More variants are available on request. Nemko 09ATEX1224X II2G Ex d e mb IIC T4 Ta-25 up to +25/+40/+45ºC
Complete assortment on www.glamox.com/gmo.
840=with 840 lamp included, FB=2xM25 brass cable glands.
Part-No. Part-No. Part-No B B1 L L1 C C1 Lamp Ta
Product
HF HF E1/S HF E3/S mm mm mm mm mm mm Code ºC
TX20-RS3 214 FB 840 MP/CL TX20065478 TX20065484 TX20065490 275 258 614 575 75 410 T16(T5) 45
TX20-RS3 228 FB 840 MP/CL TX20065479 TX20065485 TX20065491 275 258 1214 1175 75 1010 T16(T5) 40
TX20-RC3 214 FB 840 MP/CL TX20065480 TX20065486 TX20065492 282 258 614 575 75 410 T16(T5) 45
TX20-RC3 228 FB 840 MP/CL TX20065481 TX20065487 TX20065493 282 258 1214 1175 75 1010 T16(T5) 40
TX20-RC4 314 FB 840 MP/CL TX20065482 TX20065488 TX20065494 357 333 614 575 150 410 T16(T5) 45
TX20-RT6 314 FB 840 MP/CL TX20065483 TX20065489 TX20065495 597 333 597 575 150 410 T16(T5) 45
Accessories Part-No.
RS3 = Shadow panel ceiling, 300 mm width. RC3/RC4 = Concealed modular ceiling or solid ceiling (3=282 mm and 4=357 mm frame). RT6=T-profile ceiling 600 mm width.
132
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable glands
Ballast
Terminal block for battery
Charging indicator
Microswitches
Suspension rail
Terminal block EX
Light tubes
Battery unit
B1 + 10
L1 + 20
L
137 C1
B1
B
C
L1
Measurements are in mm
www.glamox.com/gmo
133
TX20-R MP/GL IP
Interior fixture for hazardous area, Zone 1 55
Application
Interior lighting fixture for
hazardous area, Zone 1.
Design
Modern design according to
rules of maritime classification
societies and IEC standards.
Housing
Painted steel.
Finish
Powder coated white RAL9016.
Mounting
Diffuser Recessed for most type of marine
Micro-prismatic diffuser (MP) that gives ceilings. Suspension rails included.
a pleasant diffused light illumination.
With hardened glass cover (GL). Cable entry
Through connection box on top
Electric 2 x M25 brass cable glands.
Delivered with electronic ballast, HF, Connection box Cable entry
HF E1/S, with 1.5 hour emergency, Termination
HF E3/S, with 3 hours emergency. 6 pole terminal block. Max 6 mm² cable.
Variants with Self Test of emergency
function available on request.
Lamp base
G5
Light source
Tubes T16 (T5) 14 or 28W.
More variants are available on request. Nemko 09ATEX1224X II2G Ex d e mb IIC T4 Ta-25 up to +25/+40/+45ºC
Complete assortment on www.glamox.com/gmo.
840=with 840 lamp included, FB=2xM25 brass cable glands.
Part-No. Part-No. Part-No B B1 L L1 C C1 Lamp Ta
Product
HF HF E1/S HF E3/S mm mm mm mm mm mm Code ºC
TX20-RS3 214 FB 840 MP/GL TX20065496 TX20065502 TX20065508 275 258 614 575 75 410 T16(T5) 45
TX20-RS3 228 FB 840 MP/GL TX20065497 TX20065503 TX20065509 275 258 1214 1175 75 1010 T16(T5) 40
TX20-RC3 214 FB 840 MP/GL TX20065498 TX20065504 TX20065510 282 258 614 575 75 410 T16(T5) 45
TX20-RC3 228 FB 840 MP/GL TX20065499 TX20065505 TX20065511 282 258 1214 1175 75 1010 T16(T5) 40
TX20-RC4 314 FB 840 MP/GL TX20065500 TX20065506 TX20065512 357 333 614 575 150 410 T16(T5) 45
TX20-RT6 314 FB 840 MP/GL TX20065501 TX20065507 TX20065513 597 333 597 575 150 410 T16(T5) 45
Accessories Part-No.
RS3 = Shadow panel ceiling, 300 mm width. RC3/RC4 = Concealed modular ceiling or solid ceiling (3=282 mm and 4=357 mm frame). RT6=T-profile ceiling 600 mm width.
134
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable glands
Ballast
Terminal block for battery
Charging indicator
Microswitches
Suspension rail
Terminal block EX
Light tubes
Battery unit
B1 + 10
L1 + 20
L
137 C1
B1
B
C
L1
Measurements are in mm
www.glamox.com/gmo
135
TX20-S SL/CL IP
Interior fixture for hazardous area, Zone 1 55
• High efficiency
• Slim design
• Easy installation
Application
Interior lighting fixture for
hazardous area, Zone 1.
Design
Modern design according to
rules of maritime classification
societies and IEC standards .
Housing
Painted steel.
Finish
Powder coated white RAL9016.
Mounting
Optic Surface mounting.
High efficient softlight MIRO optic type
(SL) with polycarbonate cover (CL). Cable entry
Through cable glands on top
Electric 2 x M25 brass cable glands.
Delivered with electronic ballast, HF,
HF E1/S, with 1.5 hour emergency, Termination
HF E3/S, with 3 hours emergency. 6 pole terminal block. Max 6 mm² cable.
Lamp base
G5
Light source
Tubes T16 (T5) 14 or 28W.
More variants are available on request. Nemko 09ATEX1224X II2G Ex d e mb IIC T4 Ta-25 up to +25/+40/+45ºC
Complete assortment on www.glamox.com/gmo.
840= with 840 lamps included
Part-No. Part-No. Part-No. B L C C1 Lamp Ta
Product
HF HF E1/S HF E3/S mm mm mm mm Code ºC
TX20-S 214 FB 840 SL/CL TX20065514 TX20065517 240 573 75 340 T16(T5) 45
TX20-S 228 FB 840 SL/CL TX20065515 TX20065518 TX20065520 240 1173 75 940 T16(T5) 40
TX20-S 314 FB 840 SL/CL TX20065516 TX20065519 TX20065521 315 573 150 340 T16(T5) 45
Accessories Part-No.
136
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Charging indicator
Microswitches
Ballast
Battery unit Terminal block
Lamp holders
Light tubes
Measurements are in mm
www.glamox.com/gmo
137
TX20-S SL/GL IP
Interior fixture for hazardous area, Zone 1 55
• High efficiency
• Slim design
• Easy installation
Application
Interior lighting fixture for
hazardous area, Zone 1.
Design
Modern design according to
rules of maritime classification
societies and IEC standards.
Housing
Painted steel.
Finish
Powder coated white RAL9016.
Mounting
Optic Surface mounting.
High efficient softlight MIRO optic type
(SL) with hardened glass cover (GL). Cable entry
Through cable glands on top
Electric 2 x M25 brass cable glands.
Delivered with electronic ballast, HF,
HF E1/S, with 1.5 hour emergency, Termination
HF E3/S, with 3 hours emergency. 6 pole terminal block. Max 6 mm² cable.
Lamp base
G5
Light source
Two tubes T16 (T5) 14 or 28W.
More variants are available on request. Nemko 09ATEX1224X II2G Ex d e mb IIC T4 Ta-25 up to +25/+40/+45ºC
Complete assortment on www.glamox.com/gmo.
840= with 840 lamps included
Part-No. Part-No. Part-No. B L C C1 Lamp Ta
Product
HF HF E1/S HF E3/S mm mm mm mm Code ºC
TX20-S 214 FB 840 SL/GL TX20065522 TX20065525 240 573 75 340 T16(T5) 45
TX20-S 228 FB 840 SL/GL TX20065523 TX20065526 TX20065528 240 1173 75 940 T16(T5) 40
TX20-S 314 FB 840 SL/GL TX20065524 TX20065527 TX20065529 315 573 150 340 T16(T5) 45
Accessories Part-No.
138
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable glands
Spare Parts/ Accessories
Cover
Spare Parts Gasket
Screws
Clamping plate
Locking ring
Nuts
Charging indicator
Microswitches
Ballast
Battery unit Terminal block
Lamp holders
Light tubes
Measurements are in mm
www.glamox.com/gmo
139
TX20-S MP/CL IP
Interior fixture for hazardous area, Zone 1 55
• High efficiency
• Slim design
• Easy installation
Application
Interior lighting fixture for
hazardous area, Zone 1.
Design
Modern design according to
rules of maritime classification
societies and IEC standards.
Housing
Painted steel.
Finish
Powder coated white RAL9016.
Mounting
Diffuser Surface mounting.
Micro-prismatic plastic (MP) that gives
a pleasant diffused light illumination. Cable entry
With polycarbonate cover (CL). Through cable glands on top
2 x M25 brass cable glands.
Electric
Delivered with electronic ballast, HF, Termination
HF E1/S, with 1.5 hour emergency, 6 pole terminal block. Max 6 mm² cable.
HF E3/S, with 3 hours emergency.
Lamp base
G5
Light source
Tubes T16 (T5) 14 or 28W.
More variants are available on request. Nemko 09ATEX1224X II2G Ex d e mb IIC T4 Ta-25 up to +25/+40/+45ºC
Complete assortment on www.glamox.com/gmo.
840= with 840 lamps included
Part-No. Part-No. Part-No. B L C C1 Lamp Ta
Product
HF HF E1/S HF E3/S mm mm mm mm Code ºC
TX20-S 214 FB 840 MP/CL TX20065530 TX20065533 240 573 75 340 T16(T5) 45
TX20-S 228 FB 840 MP/CL TX20065531 TX20065534 TX20065536 240 1173 75 940 T16(T5) 40
TX20-S 314 FB 840 MP/CL TX20065532 TX20065535 TX20065537 315 573 150 340 T16(T5) 45
Accessories Part-No.
140
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable glands
Spare Parts/ Accessories
Cover
Spare Parts Gasket
Screws
Clamping plate
Locking ring
Nuts
Terminal block for battery
Charging indicator
Microswitches
Ballast
Battery unit Terminal block
Lamp holders
Light tubes
Measurements are in mm
www.glamox.com/gmo
141
TX20-S MP/GL IP
Interior fixture for hazardous area, Zone 1 55
• High efficiency
• Slim design
• Easy installation
Application
Interior lighting fixture for
hazardous area, Zone 1.
Design
Modern design according to
rules of maritime classification
societies and IEC standards.
Housing
Painted steel.
Finish
Powder coated white RAL9016.
Mounting
Diffuser Surface mounting.
Micro-prismatic plastic (MP) that gives
a pleasant diffused light illumination. Cable entry
With hardened glass cover (GL). Through cable glands on top
2 x M25 brass cable glands.
Electric
Delivered with electronic ballast, HF, Termination
HF E1/S, with 1.5 hour emergency, 6 pole terminal block. Max 6 mm² cable.
HF E3/S, with 3 hours emergency.
Lamp base
G5
Light source
Tubes T16 (T5) 14 or 28W.
More variants are available on request. Nemko 09ATEX1224X II2G Ex d e mb IIC T4 Ta-25 up to +25/+40/+45ºC
Complete assortment on www.glamox.com/gmo.
840= with 840 lamps included
Part-No. Part-No. Part-No. B L C C1 Lamp Ta
Product
HF HF E1/S HF E3/S mm mm mm mm Code ºC
TX20-S 214 FB 840 MP/GL TX20065538 TX20065541 240 573 75 340 T16(T5) 45
TX20-S 228 FB 840 MP/GL TX20065539 TX20065542 TX20065544 240 1173 75 940 T16(T5) 40
TX20-S 314 FB 840 MP/GL TX20065540 TX20065543 TX20065545 315 573 150 340 T16(T5) 45
Accessories Part-No.
142
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Cable glands
Spare Parts/ Accessories
Cover
Spare Parts Gasket
Screws
Clamping plate
Locking ring
Nuts
Terminal block for battery
Charging indicator
Microswitches
Ballast
Battery unit Terminal block
Lamp holders
Light tubes
Measurements are in mm
www.glamox.com/gmo
143
GRX3 LL IP
Interior fixture for hazardous area, Zone 1 54
Application
Interior lighting fixture for use in marine
and Ex-classified Zone 1 areas.
Design
According to rules of maritime classification
and IEC norms. For recessed installation
in variants of panel ceilings.
Housing
Electro-galvanized and painted steel.
LL-louvre
Finish
Powder coated white RAL9016.
Lamp base
Optic Ex-certified lamp holders for
Low luminance louvre type LL and frame with T26 (T8) fluorescent tubes.
polycarbonate sheet. Frame for adaption to
actual ceiling type to be ordered separately. Light source
Two tubes T26 (T8) 18 or 36W.
Electric
Delivered with Ex-approved electronic Mounting Adjustable
ballast, HF. Available with internal Recessed mounted suspension bracket
emergency battery back up as standard. 4 adjustable swing arm brackets.
E1/S, with 90 minutes emergency
E3/S, with 3 hours emergency Cable entry Termination
One M25 brass cable gland One 6 pole Ex-certified terminal block
in each end (36W) for max 6 mm² cable on 18W.
Two M25 brass cable gland Through-wiring and one terminal
in other end (18W) block each end on 36W.
More variants are available on request. Nemko 02ATEX336 II 2G EEx edm IIC T4. Ta-20 up to +25/+45°C
Complete assortment on www.glamox.com/gmo.
Part-No. L L1 L2 C Weight Lamp
Product
HF mm mm mm mm kg Code
GRX3 218HF LL 588229102 728 693 600 7.3 T26 (T8)
GRX3-E3 218HF LL 588228702 728 693 600 9.3 T26 (T8)
GRX3 236HF LL 588249102 1338 1303 1210 11.7 T26 (T8)
GRX3-E1 236HF LL 588248702 1338 1303 1210 13.7 T26 (T8)
Accessories Part-No.
144
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
L1 205
154
C
MAX = 72
240
MIN = 24
L
28
DAMPA/DANACOUSTIC
L2 275 30
NORAC B500
L2 280
10
Measurements are in mm
www.glamox.com/gmo
145
GRX3 DP3 IP
Interior fixture for hazardous area, Zone 1 54
Application
Interior lighting fixture for use in marine
and Ex-classified Zone 1 areas.
Design
According to rules of maritime classification
and IEC norms. For recessed installation
in variants of panel ceilings.
Housing
Electro-galvanized and painted steel.
DP3 diffuser
Finish
Powder coated white RAL9016.
Lamp base Cable entry
Diffuser Ex-certified lamp holders for One M25 brass cable gland
Frame with double prismatic plastic T26 (T8) fluorescent tubes in each end (36W)
diffuser. Frame for adaption to actual Two M25 brass cable gland
ceiling type to be ordered separately. Light source in other end (18W)
Two tubes T26 (T8) 18 or 36W.
Electric Termination
Delivered with Ex-approved electronic Mounting One 6 pole Ex-certified terminal block for
ballast, HF. Available with internal Recessed mounted max 6 mm² cable on 18W. Through-wiring
emergency battery back up as standard. 4 adjustable swing arm brackets. and one terminal block each end on 36W.
E1/S, with 90 minutes emergency
E3/S, with 3 hours emergency
More variants are available on request. Nemko 02ATEX336 II 2G EEx edm IIC T4. Ta-20 up to +25/+45°C
Complete assortment on www.glamox.com/gmo.
Part-No. L L1 L2 C Weight Lamp
Product
HF mm mm mm mm kg Code
GRX3 218HF 588229101 728 693 600 6.7 T26 (T8)
GRX3-E3 218HF 588228701 728 693 600 8.7 T26 (T8)
GRX3 236HF 588249101 1338 1303 1210 10.8 T26 (T8)
GRX3-E1 236HF 588248701 1338 1303 1210 12.8 T26 (T8)
GRX3-E1 236HF 5/5-6 1338 1303 1210 12.8 T26 (T8)
Accessories Part-No.
146
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
L1 205
154
C
MAX = 72
240
MIN = 24
L
28
DAMPA/DANACOUSTIC
L2 275 30
NORAC B500
L2 280
10
Measurements are in mm
www.glamox.com/gmo
147
MAX IP IP
High quality Zone 1 luminaire 66 67
Application
For mounting indoor and
outdoor in Zone 1 areas.
Design
According to IEC, Ex and
maritime requirements.
Housing
MAXS with housing in deep drawn
stainless steel (AISI 316) for outdoor
marine environment. IP66/67
Variants with housing in Aluzink (MAXZ)
for non corrosive environments.
emergency function available on request.
Finish All electric components are mounted on
Powder coated white RAL9016 in a hinged geartray for easy maintenance.
gloss 90 for easy maintenance. Ex micro-switches disconnecting the
mains are operated by diffuser and
Diffuser make lamp replacement possible
Diffuser in moulded impact-proof without disconnecting the circuit.
Battery box
UV-resistant polycarbonate.
Gasket in silicone moulded into the diffuser. Lamp base Cable entry
Ex-approved lamp holders. One Ex cable gland and one blind
Reflector (Optic) plug each end (M20 or M25). Other
White painted hinged geartray Light source gland configurations also available.
covering all components. Two tubes T26 (T8), 18 or 36W.
Reflector on request. Variants with light sources mounted Termination
available on request. One 6-way Ex screw terminal block
Electric 6 mm² with special earth clamp
With Ex-certified electronic ballast (HF). Mounting for armoured cable each end.
Variants with combined ballast/inverter To be mounted on ceiling, cable trays or Through wiring (TW) 6 x 2.5 mm²
and battery for emergency lighting in 90 brackets welded to building construction. as standard.
minutes or 3 hours. Battery in separate Fixed end brackets as standard.
box (Ta=+50ºC) or with internal battery Also available with M8 hood Remarks
(Ta=+25ºC). Variants with Self Test of nuts for fixing on request. Variants with drop protection
diffuser available on request.
More variants are available on request.
Complete assortment on
www.glamox.com/gmo. Nemko 09ATEX1098X II 2 G Ex edmb IIC T5, Ta:-30ºup to +50ºC , II 2D Ex tD A21 T81ºC
M20 = polyamid cable gland M20, B25 = brass cabel gland M25.
Part-No. L1 C1 L C Weight Lamp Lamp
Product
HF mm mm mm mm kg Code Base
MAXZ67 218 TW PC M20 004845 724 704 681 430 4.4 T26(T8) G13
MAXZ67 236 TW PC M20 004846 1334 1314 1291 950 7.7 T26(T8) G13
MAXZ67 218 E1/S-EB TW PC M20 MAX016978 724 704 681 430 7.2 T26(T8) G13
MAXZ67 236 E1/S-EB TW PC M20 MAX016979 1334 1314 1291 950 8.9 T26(T8) G13
MAXS67 218 TW PC B25 004956 724 704 681 950 4.4 T26(T8) G13
MAXS67 236 TW PC B25 004963 1334 1314 1291 950 7.7 T26(T8) G13
MAXS67 218 E1/S-E TW PC B25 005600 724 704 681 430 7.2 T26(T8) G13
MAXS67 236 E1/S-E TW PC B25 005599 1334 1314 1291 950 9.0 T26(T8) G13
148
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Terminal block
3209440062 (left)
Diffuser clamp 3209440362 (right)
PA980109002
Ballast
See spare part list
Micro switch
15083005
Lamp holder
Battery PA020409013 (brown)
PA990529010 (4,8V) PA020409014 (blue)
PA990529001 (8,4V) PA020409017 (double)
Diffuser
PA970917018 (18W)
PA970917036 (36W)
165
165
60
85
L1 L
C1 C 50
111
128
115
L1 + 134 150
C1 + 134
124
Measurements are in mm
www.glamox.com/gmo
149
MAX ICE IP IP
High quality Zone 1 luminaire 66 67
Application
For mounting indoor or outdoor.
Design
Designed according to maritime
requirements.
Housing
Housing in deep drawn acid proof
stainless steel (S) for outdoor marine
environment.
Finish
Powder coated white RAL9016 in gloss 90
for easy maintenance. One single LED head in one end as emer-
gency light source. For 25W two single
Pane (Diffuser) LED heads, one in each end, for higher
Diffuser in moulded polycarbonate with light output in emergency mode.
self-locking clips.
Light source
Reflector (Optic) LED tubes designed for MAX fixtures.
White painted cover plate between Tubes are with opal diffuser for evenness
components and light sources. light output looking similar to fluorescent Termination
tubes. Tubes are moulded for Zone 1 One 6-way Ex screw terminal block
Electric operation. Can be delivered in different 6 mm² each end.
LED-tubes developed for optimum heat colour temperatures. Normally type cool Through wiring 6 x 2,5 mm².
transmission from LED light sources. white.
Electronic for LED in moulded housing Heating cable
meeting Ex-requirements and for maximum Mounting Self regulating Ex heating cable in fittings
resistance regarding vibration and To be mounted on ceiling, cable trays or with built in emergency light to make it
moisture. LED-tubes are fixed to gear tray brackets welded to building construction. possible to charge the NiCd battery at low
and connected by 2 wires to driver. temperatures.
No lamp base. Cable entry
Emergency 3h, battery backup. 2,5h at One cable gland and one blind plug at
-30ºC. each end as standard.
150
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Diffuser clamp
Cable clamp PA980109002
See spare part list
Terminal block
3209440062 (left)
3209440362 (right)
Battery
19596552
Diffuser
PA970917018
PA970917036
165
60
85
L1 L
C1
111
128
www.glamox.com/gmo
151
TX51 IP
EX e luminaire, surface 67
Application
For hazardous areas Zone 1 and 2
EN 60079-0/-7. Use in small areas
and escape hatches
Design
According to the rules of maritime
classification societies, additional IEC/EN
Housing
Zinc coated steel or stainless
steel, deep drawn, seamless
Gear tray
Zinc coated steel sheet
Mounting
Finish Fixed end brackets
Powder coated white RAL 9016 and
enamelled up to 70-80μm thickness Cable entry
2 glands M20PA for cable
Diffuser dia. 6 mm to 13 mm
Clear polycarbonate
Termination
Electric 3 x 2.5 mm2
Electronic ballast; flexible wiring,
heat resistant up to 105°C.
Through wiring on request
Lamp base
G5
Light source
T5 fluorescent lamp 8W
(not included)
152
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
160
115
402 105
379 85
Ø10
18
60
347
104
295
295
379 350
www.glamox.com/gmo
153
0272 IP
EEx e luminaire surface 67
Application
For hazardous areas Zone
1 and 2 EN 60079.
Design
According to rules of maritime classification
societies, additional IEC/EN.
Housing
Zinc coated steel or stainless
steel AISI 316, deep drawn.
Finish
Powder coated white RAL9016 and
enamelled up to 70-80 µm thickness. Mounting
To be mounted with two welded brackets
Diffuser with 2 holes each, Ø10.5 mm.
Clear polycarbonate.
Cable entry
Electric With Ex-certificate; M25 x 1.5
Electronic ballast; flexible wiring heat for cable Ø10 - 17 mm.
resistant up to 105°C; through wiring up
to 16A possible; type with battery back Termination
up system; Integrated NiCd battery, Terminal 4-pole or 6-pole/6 mm².
incorporated overloading protection,
LED for indication of battery power.
Charge time after full discharge:
18W 24 h; 36W 36 h.
Lamp base
G13
Light source
Designed for two 2-pin T8 (T26)
fluorescent lamps in 18 or 36W
(not included).
TW = through wiring
Part-No. Part-No. Weight Lamp Lamp Light
Product
230/HF / 50-60Hz 230/HF tw / 50-60 Hz kg Code Base Distribution
0272 2x18W 0272206000 0272206010 4.9 T26 G13 A
0272 2x18W Battery 0272736000 7.2 T26 G13 A
0272 2x36W 0272406000 0272406010 6.6 T26 G13 B
0272 2x36W Battery 0272936000 9.5 T26 G13 B
154
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
To be ordered
separately
9840045500 (6 pcs)
9840145500 (2 pcs)
9840145600
See table
18W 9840197400
36W 9840210900
225
652 200
20
430 135
Ø11
109
295
692 350
1300 192
950 160
20
Ø11 92
109
295
1340 300
Measurements are in mm
www.glamox.com/gmo
155
0285 IP
EEx e luminaire surface 67
• Reinforced diffuser
• Battery back up available
• Stainless steel housing available
Application
For harzardous areas Zone
1 and 2 EN 60079.
Design
According to rules of maritime classification
societies, additional IEC/EN.
Housing
Zinc coated steel or stainless
steel AISI 316, deep drawn.
Finish
Powder coated white RAL9016 and
enamelled up to 70-80 µm thickness. Mounting
To be mounted with two welded brackets
Diffuser with 2 holes each, Ø10.5 mm.
Clear polycarbonate, reinforced.
Cable entry
Electric With Ex-certificate; M25 x 1.5
Electronic ballast; flexible wiring heat for cable Ø10 - 17 mm.
resistant up to 105°C; through wiring up
to 16A possible; type with battery back Termination
up system; Integrated NiCd battery, Terminal 4-pole or 6-pole/6mm².
incorporated overloading protection,
LED for indication of battery power.
Charge time after full discharge:
18W 24 h; 36W 36 h.
Lamp base
G13
Light source
Designed for two 2-pin T8 (T26)
fluorescent lamps in 18 or 36W
(not included).
156
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840095300 (6 pcs.)
9840000900 (6 pcs.)
See table
9840145500 (2 pcs.)
9840145600
18W 9840005700
36W 9840000600
772 270
750 220
165
145
280
300
300
750 350
480
225
200
0
Ø11 1,5
Measurements are in mm
www.glamox.com/gmo
157
GTX IP
Robust Ex d luminaire 67
Application
For mounting indoor and
outdoor in Zone 1 areas.
Design
According to IEC, Ex and
maritime requirements.
Housing
Robust housing in polycarbonate tube
with seawater resistant end caps. End
caps are designed for glue connection
to both sides of polycarbonate tube.
Finish Mounting
End caps powder coated white RAL9016. To be mounted on ceiling, cable trays or
brackets welded to building construction.
Diffuser One hinge bracket and one fix angle
Diffuser in impact-proof UV-resistant bracket. The hinge makes it possible to
polycarbonate. move fixture to free position for removing
the gear tray when maintaining the fixture.
Electric
With magnetic ballasts and capacitor Cable entry
(F) or electronic ballast (HF). One Ex d cable gland on one side,
Emergency versions with integral and one blind plug on the other
battery available on request. side (M20 or M25). Also one gland
each side available on request.
Lamp base
G13 Termination
One 3-way screw terminal block 6 mm²
Light source with quick connector on gear tray.
Two tubes T26 (T8), 18 or 36W.
Variants with light sources mounted
available on request.
* Maintenance envelope. F= Magnetic ballast, Power factor corrected >0,9. HF= Electronic ballast
158
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9842137100 (1 set)
Please specify
cpl. part no. of luminaire
Please specify
cpl. part no.
of luminaire
9842033200 (5 pcs.)
9842033300 (5 pcs.)
9842221500 (1 set)
9842221400 (1 set)
See table
315
21892
619
560
11
5
11
25
Ø
315
92
218
1404 1380
1229
1170
11
5
11
25
Ø
Measurements are in mm
www.glamox.com/gmo
159
1826 IP
Ex d pressure watertight luminaire 68
Application
For hazardous areas Zone 1 and
2 EN 60079 as well as Zone
21 and 22 EN 61241.
Design
According to rules of maritime classification
societies, additional IEC/EN.
Housing
Aluminium, seawater resistant.
Finish
Powder coated white RAL9016.
Mounting
Diffuser One angle and one hinge
Polycarbonate with hole, Ø11 mm.
Light source
Designed for one T8 (T26) or TC-L
fluorescent lamp in 18W (not included).
160
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840137200
Please specify
cpl. part no.
of luminaire
9840137300
Please specify
G13 9840059200 (5 pcs.) cpl. part no.
2G11 9840145700 (5 pcs.) of luminaire
25
5
11
11
Ø
11
Ø
25
5
11
11
Ø
11
Ø
Measurements are in mm
www.glamox.com/gmo
161
3312 Brass Fixture IP GLOBAL MARINE & OFFSHORE
Robust fixture for Zone 1 67 LIGHTING SOLUTIONS
• Flameproof EEx d
• For incandescent or compact
fluorescent lamp
• Easy installation
Application
Brass fixture for use in marine and
Ex-classified Zone 1 areas.
Design
According to rules of maritime
classification and IEC norms.
Housing
Brass housing
Finish
Brass untreated surface.
ca 310
Electric
244
162
505 Brass Fixture IP GLOBAL MARINE & OFFSHORE
Robust fixture for Zone 1 56 LIGHTING SOLUTIONS
Application
Brass fixture for use in marine and
Ex-classified Zone 1 areas.
Design
According to rules of maritime
classification and IEC norms.
Housing
Brass housing and guard.
Finish
Brass untreated surface.
Optic Mounting 35
76
Electric
7
ca 200
Ex e terminal block and E27 lamp holder. Cable entry
60
1, 2 or 3 cable entries available
Lamp base M24 x 1.5 for cable Ø12 - 14.5 mm. 125
E27
Termination
Light source Ex-approved terminal block.
Approved for incandescent lamp 25-
60W. Only lamps approved by the
EC-type -examination certificate may
be used (see operating instruction).
www.glamox.com/gmo
163
Technical Lighting Ex
Zone 2
ZONE 2
1744..................................... 166
MIX....................................... 168
1744 MIX
Page 166 Page 168
165
1744 IP
High quality zone 2 luminaire 67 GL
Application
For hazardous areas Zone 2 EN 50021.
Design
According to rules of maritime classification
societies, additional IEC/EN.
Housing
Zinc coated steel or stainless
steel AISI 316, deep drawn.
Finish
Powder coated white RAL9016 and
enamelled up to 70-80 µm thickness.
Mounting
Diffuser To be mounted with 2 holes, Ø13 mm
Clear polycarbonate. or preinstalled threaded bushing.
Lamp base
G13
Light source
Designed for one or two T8 (T26) fluorescent
lamps in 18 or 36W (not included).
More variants are available on request. Complete assortment on www.glamox.com/gmo. PTB 04 ATEX 2090 II 3 G EEx nR II T4
Items in table below with through wiring and one cable gland each end for cable Ø 6-13 mm
Part-No. Part-No. Weight Lamp Lamp Light
Product 230/50 230/60 kg Code Base Distribution
h.p.f.c.~ h.p.f.c.~
1744 1x18W 1744006001 1744008001 3.9 T26 G13
1744 2x18W 1744206009 1744208007 4.5 T26 G13 A
1744 1x36W 1744306002 1744308001 5.5 T26 G13
1744 2x36W 1744406009 1744408007 6.0 T26 G13 B
166
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
9840045500 (6 pcs.)
9840094000 (4 sets)
Stainless steel
Please specify
cpl. part no. of luminaire
9840033400 (2 pcs.)
9840033300 (5 pcs.)
9840033200 (5 pcs.)
18W 9840005300
36W 9840005600
18W
235
692 193
652 175
56
430 135
109
275
275
Ø12
692 350
36W
192
1340 150
1300
109
132
56
950 92
300
300
Ø12
1340 300
Measurements are in mm
www.glamox.com/gmo
167
MIX IP IP
High quality zone 2 luminaire 65 67
• Easy maintenance
• Vibration safe lampholders
• Emergency versions
Application
For mounting indoor or outdoor
in Zone 2 areas.
Design
According to IEC 60079-15
and maritime requirements.
Housing
MIXS with housing in deep drawn
acid proof stainless steel (AISI 316) for
outdoor marine environment. IP65/67
Variants in Aluzink (MIXZ) for non-
corrosive environments.
All components are mounted on a hinged
Finish geartray. Quick connector on gear
Powder coated white RAL9016 in connection cables for easy maintenance.
gloss 90 for easy maintenance.
Lamp base
Diffuser G13 spring operated lamp holders.
Diffuser in moulded impact-proof Light source
and UV-resistant polycarbonate. Two tubes T26 (T8), 18 or 36W. Hinged geartray Diffuser with gasket
168
GLOBAL MARINE & OFFSHORE
LIGHTING SOLUTIONS
Terminal block
15701636
Ballast
see spare part list
Battery
PA990529010 (4,8V)
PA990529001 (8,4V) Lampholder
12104403
Diffuser
Lampholder PA970917018 (18W)
12104402 PA970917036 (36W)
165
165
60
85
L1 L
C1 C 50
111
128
115
L1 + 134 150
C1 + 134
124
Measurements are in mm
www.glamox.com/gmo
169
Electrical Heating
Wall surface
WALL SURFACE
TPA OFFSHORE....................... 173
TELCO FIB.............................. 174
TELCO T2RIB........................... 175
FAN HEATER........................... 177
171
TPA OFFSHORE IP GLOBAL MARINE & OFFSHORE
Panel heater in modern design 20 LIGHTING SOLUTIONS
Design
Flow through marine heater,
designed according to maritime
and offshore standards.
Surface temperature maximum 82ºC.
Housing
Painted steel. Protection grid on top
required (to be ordered separately).
Finish
Powder coated white RAL9016. Remarks
The panel heater can easily be detached
Electric from the frame and tilted forward. This makes
With on/off switch, electronic temperature cleaning behind the heater very easy.
controller and thermal cut-out protection
with manual reset. (Temperature
controller to be ordered separately) Electronic
temperature
Mounting controller
Wall mounted with frame. PROTECTION SCREEN PANEL HEATERS TYPE TPA OFFSHORE
100
1000W 84
Cable entry
800W 40
Connection box on frame with punch
600W
out possibilities for cable entries. 450
400W 350
Termination
7 x 6 mm² terminal block in the Min 50
connection box for fix installation. 500 650 813 975 Distance to sides = 10
Accessories
www.glamox.com/gmo
173
TELCO FIB IP
Electric heater for marine and offshore installations 22
• Elegant heater
• Low surface temperature
• Non-corrosive materials
Application
For mounting indoor for use in
all rooms where there is no need
for a splash-proof heater.
Design
Flow through marine heater, designed
according to maritime requirements.
Housing
Aluminium housing with a
protection grating on top.
Finish
Powder coated white RAL9016.
Electric
With on/off switch, bi-metal thermostat
and thermal cut-out protection.
Mounting
Wall mounted with included solid brackets. Cable entry Temperature
rear side control right end
Cable entry
Two holes for cable entry on 87 mm
L
the back, right side.
Termination
Screw type terminal block.
400 mm
Remarks 50 min
55 mm
1
Power
sidewall = 2 cm connection
150 mm 120
Minimum distance to floor = 5 cm
Minimum distance to window
sill, etc. = 15 cm min. 50 mm min 50 mm
L1
174
TELCO T2RIB
Splash-proof heater for IP
marine and offshore installations 44
DNV GL
Application
For mounting indoor in damp
accommodations, such as
bathrooms and WC’s.
Design
Flow through marine heater, designed
according to maritime requirements.
Housing
Aluminium housing with a
protection grating on top.
Finish
Powder coated white RAL9016.
Electric
With on/off switch, bi-metal thermostat
and thermal cut-out protection.
Mounting
Wall mounted with included solid brackets. Cable entry Temperatur control
rear side on front right side
Cable entry
Two holes for cable entry on L
the back, right side.
10 mm L1 96 mm
Termination
Screw type terminal block.
238 mm
Remarks
240 mm
Power
150 mm
sidewall = 2 cm
20
Minimum distance to floor = 2 cm 15 25
77 mm
10 30
Minimum distance to window 5 35
sill, etc. = 38 cm
24 19 min 20 mm min 20 mm
www.glamox.com/gmo
175
Fan Heater IP DNV
Effective fan heater for marine and offshore 44
Application
Approved for use on ships and
offshore installations.
Design
Robust fan heater designed with reinforced
electrical installation and motor and
heating elements that absorbs vibrations.
Housing
Stainless steel housing designed
for maritime environment.
Finish
Unpainted stainless steel.
375
Electric
With switch for “0” or “fan”.
300 340
Half or full heating effect.
CC 277
min 300 mm Ø9
Mounting
24
To be mounted fix on wall, or for Ø16
375
333
terminal with appropriate protection min 500 mm
class has to be mounted on cable). min
300 mm
28 Ø9
Cable entry
To be connected to an all-pole switch
with breaking gap at least 3 mm.
Termination
Delivered with flexible cable.
Remarks
The fan heater must be placed away from
flammable materials, and has to have open
area for the heated air. Installation and
maintenance instructions to be followed.
www.glamox.com/gmo
177
UL/CSA fittings
UL = Underwriters Laboratories Inc. (USA)
CSA = Canadian Standards Association
UL/CSA
GKI....................................... 180
GIOC................................... 180
GSB...................................... 180
GLA...................................... 180
0633.................................... 181
GKI GIOC GSB GLA 0633 GXPN
Page 180 Page 180 Page 180 Page 180 Page 181 Page 181 GXPN................................... 181
1833.................................... 181
GXPR..................................... 181
GIM...................................... 182
1961..................................... 182
GKASA................................. 183
DLT RS (M) FR.......................... 183
1833 GXPR GIM 1961 GKASA DLT RS (M) FR
Page 181 Page 181 Page 182 Page 182 Page 183 Page 183
179
GKI
Watertight multipurpose luminaire, surface
IP54 or 67, 120-277V/50-60Hz
Approvals
UL1598 & 1598A and CSA C22.2 No. 250.0-00
Body of electrogalvanized steel sheet or
stainless steel. Diffuser of polycarbonate.
Light source
Fluorescent tube 17/32W T8, 54W/T5HO or 40W
compact fluorescent with electronic ballast.
Option for battery backup.
GIOC
Industrial/mining wet location luminaire
NEMA 13, 120-277V/50-60Hz
Approvals
CSA C22.2 No. 250.0-00
Body of aluminium sheet. Diffuser of safety glass.
Light source
Fluorescent tube 32W T8 with electronic ballast.
GSB
Interior task lighting
IP44, 120V/60Hz
Approvals
UL1598 & 1598A and CSA C22.2 No. 250.0-00
Body of electrogalvanized steel sheet.
Diffuser of 3 mm opal acrylic.
Light source
Fluorescent tube 15/17W T8 and 140/30BX
compact fluorescent lamp.
GLA
Batten luminaire
IP20, 120V/60Hz
Approvals
CSA C22.2 No. 250.0-00
Body of electrogalvanized steel sheet.
Light source
Fluorescent tube 17/32W T8 with electronic ballast.
180
0633
Illuminated sign, recessed
IP20, 120V/60Hz
Approvals
UL1598 & 1598A and UL 924. Sign as per USCG requirements.
Body of electrogalvanized steel sheet or stainless steel.
Light source
8W T5 mini fluorescent tube.
Sign
Polycarbonate. 2in. high red letters on white background,
single sided or double sided.
GXPN
Hazardous area luminaire, surface
Class 1, Div. 2/Class 1, Zone 2
IP67, 120-277V/50-60Hz
Approvals
Class 1, Division 2, Groups A, B, C, D. UL 844, UL924 and
CSA C22.2 No. 137-M1981. Body of electrogalvanized
steel sheet or stainless steel. Diffuser of polycarbonate.
Light source
Fluorescent tube 17/32W T8, 54W/T5HO with electronic ballast.
Option for battery backup.
1833
Explosion proof luminaire
Class 1, Div. 1/Class 1, Zone 1
IP67, 120-277V/50-60Hz
Approvals
CSA approved Class 1, Division 1, Groups C & D. Flame
proof housing for supreme safety. Body of corrosion resistant
light weight aluminium alloy. Diffuser of clear polycarbonate.
Light source
Fluorescent tube 17/32W T8, with electronic ballast.
Option for battery backup.
GXPR
Hazardous area luminaire, recessed
Class 1, Div. 2/Class 1, Zone 2
IP54, 120-277V/50-60Hz
Approvals
Class 1, Division 2, Groups A, B, C, D. UL 844, UL 924 and
CSA C22.2 No.137-M1981. Body of electrogalvanized
steel sheet. Diffuser of clear polycarbonate and prismatic.
Light source
Fluorescent tube 17/32W T8, with electronic ballast.
Option for battery backup.
www.glamox.com/gmo
181
GIM
Interior fixture, recessed
IP44, 120-277V/50-60Hz
Approvals
UL1598 & 1598A and CSA C22.2 No.250.0-00
Body of electrogalvanized steel sheet.
Diffuser of clear prismatic acrylic.
Light source
Fluorescent tube 17/32W T8, with electronic ballast.
Option for battery backup.
1961
Interior fixture, surface
IP66, 120-277V/50-60Hz
Approvals
UL1598 & 1598A and US Dept. of Public Health.
Stainless steel backplate and electrogalvanized steel
sheet geartray. Diffuser of clear polycarbonate.
Light source
Fluorescent tube 17/32W T8 with electronic ballast.
182
GKASA
Interior cornice fixture
IP20, 120-277V/50-60Hz
Approvals
UL1598 & 1598A and CSA C22.2 No.250.0-00
Body of electrogalvanized steel sheet.
Diffuser of 3 mm opal acrylic.
Light source
Fluorescent tube 17/32W T8, with electronic ballast.
Option for battery backup.
DLT RS(M) FR
Ceiling luminaire, recessed
IP20, 120-277V/50-60Hz
Approvals
UL 1598 & 1598A and CSA C22.2 No.250.0-00.
Body of electrogalvanized steel sheet. Available with
either a double prismatic acrylic panel, acrylic opal panel,
white acrylic grid or metallized acrylic grid in silver.
Light source
Fluorescent tube 17/32W T8, with electronic ballast.
Option for battery backup
www.glamox.com/gmo
183
Technical information
technical information
67
Materials................................ 188
IEC 60945 International Standard.191
Ex Norms and Regulations.......... 192
General information Protection degrees Materials IEC 60945 Ex Norms and Protection in
Page 186 Page 187 Page 188 International Standard regulations hazardous areas Protection in Hazardous areas..... 193
Page 191 Page 192 Page 193 Marking of explosion protected
electrical apparatus................... 194
OptiWin ® Safety characteristics of
Flammable gas and vapours....... 195
Light technical definitions............ 196
OptiWin - Light calculation
software................................. 197
Marking Ex Safety characteristics Light technical OptiWin Fire classifications Cable entries
Page 194 Page 195 definitions Page 197 Page 198 Page 199 Fire classification...................... 198
Page 196 Cable entries........................... 199
Electronic ballasts..................... 200
Load table.............................. 202
Light control............................. 204
Lamp data.............................. 205
Lamp base.............................. 212
Electronic ballasts Load table Light control Lamp data Lamp base Alphabetic index
Alphabetic index...................... 213
Page 200 Page 202 Page 204 Page 205 Page 212 Page 213
185
Technical information
General information
Technical requirements for electrical devices
that earlier have been based on each nations
requirements, are today more based on
international agreements for more countries.
Glamox has, since the EMC Directive was The first number refers to solid objects/
implemented, built advanced laboratories dust and the second to water. The Glamox
where we can do all relevant tests. In par- group has laboratories for testing IP class-
allel we have educated our staff to have ification.
knowledge on this matter.
Mainly, higher IP-rating means higher dust
and watertightness. Please remember the
IP66 -rating which also takes in consider-
ation the protection against heavy seas
and high pressure water cleaning. IP67-
rating does not give any guarantee that
IP66 requirements is met.
186
Technical information
Protection degrees
The following protection degrees define the
protection of electrical appliances against
accidental contact, foreign matters and water
as laid down in IEC Publication 60529.
Example: IP 6 7 20
Ident. mark
Immersion depth
in metres (for IP68)
Table 1 Table 2
First Second
Protection level (contact and foreign matters) Protection level (water)
ident. No. ident. No.
0 No special protection 0 No special protection
Protection against penetration of solid foreign matters, diameter > Protection against vertical falling drip water, shall have no
1 50 mm, no protection against intentional contact e.g. by hand, body 1 harmful effect.
contact, however, is prevented.
Protection against penetration of solid foreign matters with outside Protection against vertical falling drip water; when fixture is shifted
2 diameter of more than 12 mm, finger contact or similar is prevented. 2 up to 15° from its normal operating condition there shall be no harm-
ful effect (flanking drip water).
Protection against penetration of solid foreign matters with outside Protection against spray water falling at any angle up to 60° against
3 diameter of more than 2.5 mm. Prevents insertion of tools, wires or 3 perpendicular. It shall have no harmful effect (spray water).
similar matters larger than 2.5 mm.
Protection against penetration of solid foreign matters with outside Protection against water splashed against the fixture from any
4 diameter of more than 1 mm. Prevents insertion of tools, wires or 4 direction, shall have no harmful effect (splash water).
similar matters larger than 1 mm.
Protection against damaging dust accumulation. The penetration Protection against water projected by a nozzle against the fixture
of dust is not totally prevented but is not permitted to penetrate to from any direction, shall have no harmful effect (hosed water).
5 5
such a degree that the effectiveness of the equipment is affected.
Complete contact protection.
Protection against penetration of dust. Complete contact protection. Protection against green water or strong jet stream, water must not
6 6
enter the fixture in harmful quantities (overflooding).
Protection against water when fixture is submerged under defined
7 conditions of time pressure. Water shall not enter fixture in harmful
quantities (submerging).
The equipment is suitable for continous submersion in water under
8
conditions specified by the manufacturer.
187
Technical information
Materials
Stainless steel with improved corrosionresistance is Al/Zn steel is far from the anti-corrosive properties
Stainless steel is the preferable choice for coated steel. found with the various types of stainless
luminaires which is being exposed to steel.
extreme corrosive marine and offshore en- Common for this group of materials is
vironments at sea. In the Glamox product that they are “coated” with various alloy Electro-galvanized or Al/Zn coated steel
range you will find luminaire housing of composistions of Aluminium (Al) and Zink qualities should not be used in severe cor-
stainless steel quality American standard (Zn). The material Aluzink which is used for rosive areas, such as outdoor marine and
AISI 316. The table below shows an over- some of the products within the Glamox offshore environments. For outdoor marine
view for comparison of different stainless range is such an example where the coat- and offshore environment stainless steel
steel qualities. ing has an alloy composition of 5% Al AISI 316 is preferable.
and 95% Zn. The mechanism in which the
Al/Zn Coated steel material is given an improved corrosion
There are several types of steel-qualities resistance is called cathodic protection.
which are in common use today where cor-
rosion properties are enhanced compared However the corrosion protection found
to e.g black steel. One group of material with electro-galvanized or Al/Zn coated
188
Technical information
Materials
Plastic materials
A variety of different polymer materials are used in some of the products in this catalogue, each material carefully chosen to satisfy the
strictest quality requirements. The table below shows a selection of properties of two of the most common polymers used in our product
range.
Polymethylmetacrylate Polycarbonate
PMMA PC
Typical trade name Acrylic Plexiglas Makrolon Lexan
Temperature range -50ºC - + 85ºC - 150ºC - + 130ºC
Mechanical properties Good under normal conditions of use Especially tough (shock resistant)
Transmissivity - colourless 92% 82%
Transmissivity - white/opal 46% - 65% 46% - 65%
Combustibility according to UL 94 - HB 94V-2 / 94V-0
Chemical resistance - general good good
- solvents not to be used not to be used
Technical data in this table is for informative use only. Different variants of these materials might deviate somewhat from the information
given in this table.
Cleaning instructions/procedures for cleaning of gasket and diffuser, check- with mild soap water, by applying the de-
In order to maintain preferable working ing for cracks in diffuser, testing the tight- tergent solution with a damp cloth (<IP56)
conditions for the luminaires, to optimize ness of glands, etc. This is recommended or a low pressure spray nozzle (>IP56).
life-time and lighting performance, it is im- to keep the impactand ingress protection Let the solution work for a minute or two,
portant to clean and service the equipment intact. Water intrusion might result in bad and rinse or flush throughly with fresh
within chosen maintenance intervals. This is light performance, reduced life-time and water (depending on the luminaires ingress
particularly relevant for outdoor fixtures. short-circuit. protection degree). Very high pressure
The frequency is dependent on the work- should however be avoided. IP66/IP67/
ing conditions, meaning area of installation Secondly it is important to avoid the use of IP68 luminaires can be flushed by much
and exposure to external factors like sea organic solvents on fixtures with plastic de- water, but with low pressure only. For IP56
water, dirt, chemicals, etc. tails. Most polymer materials will crack in luminaires light rinsing should be adequate.
contact with most common organic sol- For lower protection degree luminaires
First of all it is imperative to include the vents. The latter is a general fact that is (<IP56) removal of detergent solution can
luminaires in the schedule for ordinary not bounded to products in this catalogue be done by wiping it off with a damp
periodical maintenance and actually on only. cloth. Remark: The voltage must be turned
a regular basis check them for any sign off whenever rinsing or flushing the outside
of water ingress, then establish routines Cleaning of luminaires should be done of any luminaire.
189
190
Technical information
IEC 60945 International Standard
Requirements for radio equipment
hereunder remote controllers
191
Technical information
Ex norms and regulations
Introduction to the principles of explosion
protected electrical equipment
IEC 60079-0 to IEC 60079-18
Hazardous Area
For hazardous areas, it is very important ZONE 1 is a place where an explosive European Standard
that the product is designed for use in the atmosphere consisting of a mixture of air European coding marking standard for
actual area, and that operation and main- with any combination of flammable gas, products designed for use in hazardous
tenance are according to the requirements. vapour or mist is present only occasionally areas:
during normal operation.
The norms for hazardous areas are not Ex is the coding for products confirming
the same for all over the world, but during ZONE 2 is a place where an explosive to IEC standard
the last years, the world wide harmoniz- atmosphere consisting of a mixture of air
ing work have had much focus, and the with any combination of flammable gas, If the product confirms to the
IEC Ex certification is being ratified by vapour or mist is not likely to occur in nor- harmonised European Standards
more and more countries. For Europe, the mal operation, but if it occurs, will persist which has been notified by EU for
ATEX directives for equipment (94/9/EC) for a short period of time. the ATEX directive, the product will
and worker protection (1999/92/EC) in also carry the hexagon Exsymbol.
potentially explosive atmospheres become For explosive atmospheres due to combus-
mandatory from 1st July 2003. tible dust in air, a similaire classification
exists, with the zones numbered Zone 20,
This means that all products delivered for Zone 21 and Zone 22. ZONE Marking
installation in hazardous area in buildings Directive 1999/92/EC do
and fixed installations in Europe from that Category groups also have requirement that
date have to be certified according to the Electrical equipment has to be classified in areas in which explosive
ATEX norms. two different category groups: atmospheres can occur
must have warning signs.
The ATEX directives are covering both elec- Group I Electrical equipment for mining
trical and non-electrical equipment, and for Group II Electrical equipment for all
the first time, mechanical equipment falls remaining hazardous areas
under this type of legislation.
Equipment group
Classification of Zones For the different areas, the equipment has
The hazardous areas have to be to be classified
classified in Zones:
Group II. For gas and dust:
ZONE 0 is a place where an explosive Zone 0/20 Equipment 1G/1D
atmosphere consisting of a mixture of air Zone 1/21 Equipment 2G/2D
with any combination of flammable gas, Zone 2/22 Equipment 3G/3D
vapour or mist is present continously, fre-
quently or for long periods. Group I. For mining:
Methan M1
Dust M2 or M1
192
Technical information
Protection in hazardous areas
Introduction to the principles of explosion
protected electrical equipment
IEC 60079-0 to IEC 60079-18
Type of protection
Basic principle Schematic Applications
to IEC Standard
Flameproof enclosure A type of protection in which the parts, which Switchgear, control and indicating equip-
can ignite an explosive atmosphere are ment, control boards, motors, transformers,
placed in an enclosure, which can withstand light fittings and other spark-producing parts
193
Technical information
Marking of explosion protected electrical apparatus
Product and area marking according to
directive 94/9/EC (ATEX)
ATEX labelling
Products certified according to ATEX also have the certification number as well as the
certification authority and year of certification on the label.
For GFX floodlight you will find: PTB 03ATEX1114
This states that the fixture is approved by PTB (notified body number 0102) in year 2003,
according to ATEX and the number given is 1114.
Equipment group:
I: mining
II: non-mining Type of protection Notified Body Certificate number
Temperature class
Atmosphere: Gas group Ambient
(Maximum surface
D: Dust (minimum ignition energy): temperature
temperature:)
G: Gas I: Methane max 45° C
T1: 450°C
Category IIA: Prophane (200µj)
T2: 300°C
(level of protection): IIB: Ethylene (60µj)
T3: 200°C
1: Very high IIC: Hydrogen (20µj)
T4: 135°C
2: High
T5: 100°C
3: Normal
T6: 85°C
Temperature classes
For safety utilisation, the maximum inflammable gas or dust mixture. Based
temperature of the product has to be lower upon this, the products have to be
than the ignition temperature of the classified into temperature classes.
194
Technical information
Safety characteristics of flammable gas and vapours
Source: Appendix B, VDE 0165/9.83 *) The explosion group for this medium has not yet been defined
(1) Also Explosion group II B + CS2 (2) Also Explosion group II B + H2 (3) Also Explosion group II B + C2H2
195
Technical information
Light technical definitions
Luminous Lumen Lumen output is the total amount of light from a light source defined toward
flux (lm) the sensitivity curve of the human eye.
Luminous Candela Intensity of the light output in a specific direction.
I I=
intensity (cd) Defined as luminous flux per solid angle.
Illuminance Lux The luminous flux that hits an area divided by the size of that area.
E E =A
(lx)
I
Luminance L= A
The luminous intensity that reflects from a surface divided by the
L (cd/ m²) size of the perceived surface.
(L = I cos )
A
Luminance The luminance distribution in the field of view controls the adaptation level
distribution of the eyes, which affects task visibility.
Colour Kelvin The colour temperature is used to identify the respective light colour.
CIE 17.4
temperature K Less 4000K = Warm light. Above 4000K = Cold light.
Colour The colour-rendering index Ra derived from a set of six test colours and is used to
rendering evaluate the colour rendering characteristics of the lamp. The index is graded from
Ra Ra-index CIE 17.4 1 - 100 where 100 are lamps that contain radiation from the whole visible spectre.
DIN 5035 states six of these levels: 1A=90-100; 1B=80-90; 2A=70-80; 2B=60-70;
3=40-60 and 4=20-40. 1B is recommended for indoor working environment.
Luminous Luminous flux from the lamps divided by the power loss of the lamps.
H Lm/W H=
efficacy P
System Luminous flux from the lamps divided by the power loss of the system
Hs Lm/W H = Ps
efficacy (lamps, ballast and others).
Uniformity / Emin Lmin Relations between the lowest and the average value.
Evenness Emid Lmid Passes for both Illuminance and luminance.
Glare A condition that affects the visibility to see details or gives distaste. Normally divided
CIE-31
in to: unpleasant glare (UGR/NB) and Sight restrictive glare (TI/º)
Cut-off angle The angle between a horizontal axes through the luminaire and the sightline
when the light source becomes visible.
Light output Ratio of the total flux of the luminaire, measured under specific conditions, to the sum
%
ratio of the individual luminous fluxes of the lamps operating outside the luminaire.
Reflection coef- out Ratio of the total flux reflected from an area to the incoming flux on the same area.
p %
ficient in
Contrast / Con- Objects can be distinguished primarily on the basis on the difference in luminance
C
trast sensitivity and colour between the objects and its immediate surroundings. The contrast
C = Lb÷Lo
Lb sensitivity expresses the least possible luminance contrast the eye can discern.
Cs
Cs is influenced among others by glare from the visual field.
Average Hours Average lifetime is defined as when 50% of a larger amount of the
lifetime (h) product is still running.
Service Hours Service lifetime is defined as when 80% of the calculated lux level is reached.
lifetime (h)
Economical Hours Economical lifetime is defined as when 70% of a larger amount of the
lifetime (h) product is still running.
196
OptiWin®
Light calculation software
• Allows for importing both 2D and
3D drawings from AutoCAD
• Unique tool for advanced engineering
• Projecting and documentation of
complex lighting installations
• OptiWin® 3D Pro makes it possible • The results will also secure the • You can exchange the result-database
to calculate the most demanding installation as you are taking into with other users through E-mail, reducing
environments consideration all equipment from the communication time
• Save up to 80% engineering time. The drawing level
light calculation enables you to take • All results are available in a
corrective actions at a very ealy stage comprehensive report
Big Models
With the 3D editor you can open the
AutoCAD drawing and select the area to
import into OptiWin® 3D Pro
Large Surfaces
Place the luminaries, perform the
calculation. The result can be incorporated
into the AutoCAD drawing
Time Saving
New tool showing the light distribution of
a fitting. Excellent feature for location and
orientation of floodlights
197
Technical information
Fire classification
198
Technical information
Cable entries
Cable entries
1 2 3 4
M20/M25 x 1.5 plastic, M20/M25 x 1.5 brass M24 x 1.5 without M24 x 1.5 with earthing
polyamide for use on luminaires up to earthing inserts, inserts, similar to DIN
for use on luminaires up to protection degree IP67. Possible similar to DIN 89280 for 89280 for cable MGCG
protection degree IP68. Possible cable diameters for M20, 8 to cable MGG (with protective cover). Possible
cable diameters for M20, 7 13 mm. For M25, 12 to 19 mm (without protective cover). cable diameters 8 mm to 17
to 14 mm. For M25, 9 to 18 (same for Ex). Other diameter Possible cable diameters 8 mm mm. Standard sealing ring
mm (for Ex 8-13/13-19).Other requirements should be stated to 17 mm. Standard sealing and earthing insert for cable
diameter requirements should be when ordering. ring for cable diameter of 10 diameter of 10 mm to 12 mm.
stated when ordering. mm to 12 mm. Other diameter Other diameter requirements
requirements should be stated should be stated when ordering.
when ordering.
Cable glands
Material Dimension From To Gland Nut Blind plug Nut Gasket “Earth washer”
Exe-approvd
Polyamide M20 8.0 13.0 28503020 28503220 28503120 28503220 27250317
Polyamide M25 13.0 19.0 28503025 28070125 28501225 28070125 27250318
Brass M20 8.0 13.0 28500120 28201020 28501120 28201020 27250317 nut with earth points
Brass M25 12.0 19.0 28500025 28201025 28501125 28201025 27250318 nut with earth points
199
Technical information
Electronic ballasts
• Save up to 25% energy consumption • Rapid start • Minimum of electromagnetic fields
• Increase lifetime on light sources • Constant output during variable input • No stroboscopic effect
• Flicker free light voltage periods • Reduce luminaire weight
• Deactivate old light source at end
of lifetime
General:
Compared to the first HF, which was pre-
sented in the mid 80s with rather high pric-
es, the current 5th. generation HF has an
acceptable price level. Basically, custom-
ers buy HF luminaires to reduce the total
operation costs. This will lower both power
costs and number of lamp changes. The
main beneficiary of HF luminaires how-
ever, is the user. Research indicates that
HF light reduces tiredness and improves
concentration. Some claim that installing
a HF is the simplest and least expensive
way to improve the internal environment.
Glamox uses HF ballasts from European
leading producers only. All our HF con-
tains the latest features like warm-start and
constant light output under variable input
voltage. For areas where vibrations occur
(engine room), Glamox do not recommend
standard electronic ballasts.
Description of functions: This again increases the light source’s emit electrons, less stress, resulting in a
HF control gear consists of the following: efficiency. longer lifecycle of the light tube.
- A two-way filter first preventing irregulari-
ties on the mains to damage the HF and Flicker free Constant light
second to prevent disturbances from the The conventional control gear fluctuates Constant light means that the HF control
ballast to the mains. at the same frequency as the mains. This gear gives a constant lamp current to the
- A rectifier transforming from AC to DC frequency (50 or 60Hz) could give some light tube independent of the system main
power people both headache and concentration voltage. This means that the light tube
- A high frequency generator transforming problems. Using a HF ballast operating gives a constant light level in spite of
the DC to high frequency lamp current with a frequency of approx. 40kHz results irregularities on the network.
- Logic control circuits to control correct in a flicker free light tube.
lamp starting, deactivate light tubes, etc. Deactivated tubes
Rapid start A conventional control gear will try and try
Compared to conventional control gear, Conventional control gear with a starter again to start a defect lamp resulting in a
the ballast itself controls the lamp starting. will continue restarting the light tube if it flickering light tube. The starter will, after a
The cathodes are preheated to the correct fails to start the first time. HF control gear while, short circuit and leave the lamp in a
temperature, for approx. 0,5-1,2 sec., results in a one time controlled start of the glowing position. A drastic temperature rise
before a starting pulse generates the re- light tube. in the ballast follows, which means there
charge process. The high frequency lamp could be a fire risk. By using a HF ballast,
current creates a more efficient light tube. Warm start lamps that can’t be started will be auto-
The thin fluorescent layer inside the light Using warm start, the cathodes are pre- matically deactivated. Note: A two-lamp
tube makes the light constant instead of heated before the actual starting process. ballast will disconnect both tubes even if
fluctuating with the frequency of the mains. This gives the emission materials, which only one of them stops working.
200
Technical information
Electronic ballasts
EMC
EMC or Electromagnetic Compatibility
refers to European standards regulating
the level of electromagnetic pollution from
201
Technical information
Load table HF
With simultaneous connection of a large
number of electronic ballasts, voltage can
fall, which can cause individual luminaires
not to start. In such circumstances we
recommend that the luminaires are split into
groups using a contactor that delays the
starting point by 1 - 2 seconds.
202
Technical information
Load table F
The values for starting current are set in
relation to automated fuses with C-
characteristics. The number of luminaires
on a 16Amp circuit with 16C fuses will
then be: (16/Is) * 0.8. Factor 0.8 is used
as the safety factor.
Lamp Reactor Total Ballast loss Tot. wattage Mains Starting Lamp
Type wattage loss wattage Low loss Low loss current current current
(W) (W) (W) (W) (W) (A) Is (A) (A)
The values for starting current are set in relation to automatic fuses with C characteristics. The number of luminaires on a
16 Amp circuit with 16C fuses is then: (16/ls) * 0.8. Factor 0.8 is used as the safety factor.
203
Technical information
Light control - dimming
• Creates adapted atmosphere
according to special requirements
• Energy saving
• 1-10V analog (HFDa) or digital (HFDd)
General Advantages/Disadvantages
It may be important to change the light The analog 1-10V (HFDa) system is
scene of a room depending on the type of standardized and most of the suppliers
activity, the precision required for a special of electronic ballasts are supplying large
task or the individual choice for comfort. or small dimming systems for 1-10V
control. On the other hand, despite the
In order to adjust the light level in a room, standardization, there are deviations
Glamox propose most of the light fittings among the products available. The result
with dimmable variants. will be a difference in the light output
between light tubes in the same room.
Solutions The same result will occur if a large
The two standard variants for dimming are installation is realised; voltage drop on the
the analog 1-10V (HFDa) solution and the control cable between the first and the last
digital (HFDd/DSI) solution. luminaire will result in different light levels.
More over, it is not possible to switch on
Ballast and off a luminaire by using the 1-10V
The ballast is the key for dimming (for signal.
fluorescent fittings) and will be different
depending on the existing installation. The digital DSI (HFDd) system is not
sensible to voltage drop and polarity
on the signal cable. Luminaires can be
switched on/off through the signal cable,
which means that mains and signal can
be considered independent. On the
other hand, the purchase price for small
installations will be high as a digital sub-
central is allways needed. That is why
we recommend the use of the Switch Dim
system for small installations.
204
Technical information
Lamp data
Light tubes
Light tubes produce light when a starter wall. Different light powders dictate the
generates an electrical pulse, which starts a spectral characteristics. A current through the
discharge of gas in the tube. This discharge tube limits/increases the discharge process
generates ultraviolet light that is transformed and so defines the luminous efficiency.
into visible light when it meets the fluorescent
coating (light powder) in the tubes glass
2700 77000336
T5, Tube 14 1200 96 3000 77000335
Ra>80 4000 77000337
FDH T16 G5
Economic lifetime 2700 77000342
19000 hr 28 2600 104 3000 77000343
4000 77000344
2700 77000079
15 1000 67 3000 77000080
4000 77000081
2700 77000274
18 1350 75 3000 77000275
* Lumen values for T5 at 25ºC. Maximum luminance value is at 35ºC and is 10 - 14% higher.
**Luminous efficacy is at maximum lumen values.
205
Technical information
Lamp data
Compact light tubes
A compact light tube is in reality just an (4 pin). Note that for HF ballast or integrated
ordinary tube that has been bent around on emergency lighting you should always use
itself so you only need one lamp per fitting. 4 pin compact tubes as the HF ballast and
There are two principle types. One has built- emergency light units have their own ”starter”
in starter (2 pin) and the other does not built in.
4000 77000026
Ra>80 FSQ-I TC-D
2700 77000009
Economic lifetime G24d-2 18 1200 67 3000 77000010
10000 hr 4000 77000011
2700 77000221
G24d-3 26 1800 69 3000 77000219
4000 77000222
2700 77000097
10 600 60 3000 77000018
4000 77000098
G24q-1
Compact light tubes 2700 77000099
4 limb, 4 pin 13 900 69 3000 77000002
TCDEL
4000 77000100
Ra>80 FSQ-E TC-DEL
2700 77000012
Economic lifetime G24q-2 18 1200 67 3000 77000013
13000 hr 4000 77000014
2700 77000220
G24q-3 26 1800 69 3000 77000217
4000 77000218
206
Technical information
Lamp data
12000 hr
Compact light tubes GR10q 16 1050 65 2700 77000140
2D, 4 pin
FS-E TC-DD/E GR10q 28 2050 73 2700 77000184
Economic lifetime
12000 h GR10q 38 2850 75 2700 77000183
207
Technical information
Lamp data
Metal halide
Metal halide lights produce light by starting This requires a high starting voltage. For this
an electrical discharge in argon gas reason an external starter is used that gives
between primary and secondary electrodes. start pulses of 1.5 – 4 kV. It can take up
This causes ionisation in the discharge tube to 10 min. before the light has reached full
so the discharge between the electrodes light flux. Ceramic versions give more stable
starts. colour temperatures and color rendering
throughout their lifetime.
Wattage
Figure Type ILCOS ZVEI Base Beam angle Light strength (cd) Colour temp. (K) Item no.
(W)
10 37000 3000 41886
HIPAR30
35 30 7000 3000 41887
PAR 30 MR HIPAR 30 E27 10 55000 3000 41621
70 40 10000 3000 41620
20 25 4000 2910 403141
HIPAR 51 HIPAR 51 GX10 40 1700 2910 403140
20
Supplier definitions – Metal Halide
Wattage
Figure ILCOS ZVEI Base GE Osram* Philips** Iwasaki Sylvania
(W)
HITCRI 35 CMH 35/T HCI-T 35 CDM-T 35
MT HIT G12 70 CMH 70 T HCI-T 70 CDM-T 70 MHT 70 HSI-T 70
150 ARC 150 HCI-T 150 CDM-T 150 CMI-T 150
HITDE HIT- RX7s
70 CMH 70 TD HCI-TS 70 CDM-TD 70 HSI-TD 70
MD 150 ARC 150 HCI-TS CDM-TD 150 HSI-TD 150
DE
Fc2 250 ARC 250 HQI-TS 250 MHN-TD 250 HSI-TD 250
HIT 150 HCI-TT CDO-TT MT 150
MT HIT E40 250 ARC 250/T HQI-T 250 HPI-T 250 MT 250 HSI-T 250
400¹ ARC 400/T HQI-T 400 HPI-T plus 400 MT 400 HSI-T 400
70 HQI-E 70 CDO-ET 70 MT 70 HSI-MP
HME
E27 100 MXR 100 HQI-E 100 CDO-ET 100 HSI-MP 100
ME HIE 150 HQI-E 150 MT 150
250 ARC 250/D HQI-E 250 HPI-E 250 MT 250 HSI-S 400
E40
400¹ ARC 400/D HQI-E 400 HPI-E 400 MT 400 HSI-S 400
*Osram definition with Ceramic burner = HCI with Quartz burner= HQI. ** Philips definition with ceramic burner = CD, with Quartz burner = HPI.
208
Technical information
Lamp data
High intensity sodium
High intensity sodium lamps do not require
secondary electrodes. The Xenon gas is
ionised with the help of an external starting
ignitor that also starts the discharge of
sodium vapour. Beyond this starting the
operation is as with metal halide lamps.
Wattage
Figure ILCOS ZVEI Base GE Osram Philips Iwasaki Sylvania
(W)
E27 70 LU70/90/T NAV T 70 SON-T 70 SHP-T 70
HST 100 LU 100/..T NAV T 100 SON-T 100 NHT 100 SHP-T 100
150 LU150/..T NAV T 150 SON-T 150 NHT 150 SHP-T 150
ST HST 250 LU250./T NAV T 250 SON-T 250 NHT 250 SHP-T 250
E40
400 LU400./T NAV T 400 SON-T 400 NHT 400 SHP-T 400
1000 LU1000/T NAV T 1000 SON-T 1000 NHT 1000 SHP-T 1000
50 LU50/90/D NAV E 50 SON-E 50 NH 50 SHP-S 50
E27 70 LU70/90/D NAV E 70 SON-E 70 NH 70./HV/. SHP-S 70
HSE
100 LU 100/..D NAV E 100 SON-E 100 NH 100 F SHP-S 100
SE HSE 150 LU150/..D NAV E 150 SON-E 250 NH 150.. SHP-S 150
E40 250 LU250/..D NAV E 250 SON-E 250 NH 250.. SHP-S 250
400 LU400/..D NAV E 400 SON-E 400 NH 400.. SHP 400
1000 LU1000/.D NAV E 1000 SON-E 1000 NH 1000
209
Technical information
Lamp data
Halogen incandescent lamps
From a light technical point of view halogen can be used, which are also stronger. This
lamps function in the same way as normal means that higher intensity in the lamp is
incandescent lamps. The difference lies in possible. This raised pressure produces less
the fact that a halogen is added to prevent vaporisation of the filament and so an even
the vaporised tungsten from settling on the higher temperature The result is a significant
bulb and blackening it, but instead returns higher luminous efficacy compared to
to the electrode. Since the problem of conventional incandescent lamps.
blackening is eliminated, smaller glass bulbs
210
Technical information
Lamp data
Figure Type ILCOS ZVEI Base Wattage (W) Lumen (lm) Colour temp.(K) Item no.
211
Technical information
Lamp base
The definitions for lamp bases are
standardised through an international ISO
standard. Nowadays there are several light
sources within the same product family, but
with completely different bases. It is therefore
important that you check which type of lamp
base your luminaire has.
212
Alphabetic index
214
215
Norway China Canada
Glamox International Glamox Lighting Co.Ltd. (Dalian) Glamox Canada Inc.
Tel +47 71 25 04 00 Tel +86 411 8673 6067 Tel +1 709 753 2373
Fax +47 71 21 85 40 Fax +86 411 8673 6157 Fax +1 709 753 2180
info.gi@glamox.com glamox@public1.sz.js.cn sales@glamox.ca
South Korea
Glamox Korea Co., Ltd.
Tel +82 (0) 51 971 7200
Fax +82 (0) 51 971 9273
Product brands:
BK999448_ July12