Professional Documents
Culture Documents
www.CheraghCheck.ir
Chapter X
Driver’s seat
4. Dismantle 3 fixing nuts on BCM and unplug 5 harness connectors as shown in figure below.
Note: for dismantling, first unplug 2 connectors pointing at driver door and then unplug 3 connectors
pointing at car tail. Reassemble them in opposite sequence and if they are snapped in place, a crisp click
is emitted.
M6 nuts (3 nuts)
Harness connectors (3
pieces) pointing at car tail
5. After replacing to a new BCM, connect negative pole of battery for power on.
1
www.CheraghCheck.ir
2
www.CheraghCheck.ir
3
www.CheraghCheck.ir
Pin definition:
4
www.CheraghCheck.ir
5
www.CheraghCheck.ir
V5