Professional Documents
Culture Documents
2. Task to be done:
Implement network topology Mesh with the help of packet tracer.
H/W Requirement :-
4. Steps
1. Insert a few Switches and attach connect them to one another so that they are all connected to every
other device.
2. Attach PCs to switches and assign them IP adresses.
3. Drop Simple PDU from one device to another .
4. Go to simulation mode and click Auto/Capture/Play.
5. Analyze how data is sent from one PC to another when multiple paths are available to forward data.
1. It’s costly as compared to the opposite network topologies i.e. star, bus, point to point
topology.
2. Installation is extremely difficult in the mesh.
3. Power requirement is higher as all the nodes will need to remain active all the time and
share the load.
4. Complex process.
5. The cost to implement mesh is above other selections.
6. There is a high risk of redundant connections.
7. Each node requires a further utility cost to think about.
8. Maintenance needs are challenging with a mesh.
Result:
Mesh Topology has been successfully implemented and messages are successfully delivered at
desire location.
Learning outcomes (What I have learnt):
4.
Evaluation Grid (To be created as per the SOP and Assessment guidelines by the faculty):