Professional Documents
Culture Documents
RPR3-06 Size 06 (D03) Qmax 80 l/min (21 GPM) pmax 350 bar (5100 PSI)
Technical Features
›› Direct acting manually operated directional control valve with subplate mounting
interface acc. to ISO 4401, DIN 24340 (CETOP 03)
›› High transmitted hydraulic power up to 350 bar, optimized design for minimized
pressure drop
›› Three chamber housing design for production cost saving
›› Manual lever and actuation element can be rotated in 90° increments for flexible
installation
›› Wide range of interchangeable spools available
›› Springless, detented valves available, valve holds last selected position, available for all spools
›› In the standard version, the valve housing is phosphated and steel parts zinc-coated
for 240 h salt spray protection acc. to ISO 9227
›› Enhanced surface protection for mobile sector available (ISO 9227, 520 h salt spray)
Fluid temperature range (NBR) °C (°F) -30 ... +100 (-22 ... +212)
A Fluid temperature range (FPM) °C (°F) -20 ... +120 (-4 ... +248)
Service life cycles 106
5,1 (0.20) Weight kg (lbs) 1.6 (3.53)
15,5 (0.61)
25,9 (1.16) Datasheet Type
31(1.22) General information GI_0060 Products and operating conditions
Mounting interface SMT_0019 Size 06
Ports P, A, B, T - max ∅7.5 mm (0.29 in) Spare parts SP_8010
2 1 4
(4351) 300 (406) 28
3 5 5
(348) 24
(3626) 250
3
2 (290) 20
(2901) 200 2
3 (232) 16
4
(2176) 150 1
(174) 12
(1450) 100 (116) 8
4
(725) 50 (58) 4
5
0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80
(2.6) (7.9) (13.2) (21.1) (5.3) (10.6) (15.9) (21.1)
Flow Q [l/min (GPM)] Flow Q [l/min (GPM)]
For operating limits under conditions and flow directions other than shown contact our technical support. Admissible operating limits may be
considerably lower with only one direction of flow (A or B plugged, or without flow.)
Page 1 1 www.argo-hytos.com
Subject to change · RPR3-06_4004_3en_06/2019
Dimension in millimeters (inches)
12,5 (0.49)
Z Spool position according to the position of hand lever
4/3 valve,
15 15 P lever on side (A) on side (B)
0 0
A 1
7 (0.28)
1 2 A B A B 2
45 (1.77)
B
1 P T 2 2 P T 1
T 4/2 valve,
13 (0.51)
lever on side (A) on side (B)
36,4 (1.43) 68 (2.68)
17,5 (0.69)
0 0
134 (5.28) 1 A B A B 1
140,5 (5.51)
1 1
9,5 (0.37) P T P T
4/2 valve,
lever on side (A)
0
1 A B
49 ,3(1.94)
45,5 (1.80)
37,3 (1.47)
31,5 (1.24)
P T 1
Spool Symbols
Type Symbol Interposition Type Symbol Interposition Type Symbol Interposition
A B A B A B
A B A B A B
C11 P T
Y14 P T
X21 P T
A B A B A B
A B A B A B
Y11 P T
H11 Z55 P T
P T
A B A B A B
A B A B
A B
L21 P T
Z11 J15
P T P T
A B A B A B
Z15 P T
H51 P T J75 P T
A B A B A B
A B A B A B
H15 R11
P T P T
R25 P T
A B A B
A B
A B A B
Y15 R21
P T P T
Ordering Code
RPR3-06 / -
Surface treatment
4/2 and 4/3 directional control valve, No designation
standard
manually operated A zinc-coated (ZnCr-3), ISO 9227 (240 h)
B zinc-coated (ZnNi), ISO 9227 (520 h)
Valve size
Seals
Number of valve positions No designation NBR
two positions 2 V FPM (Viton)
three positions 3
Manual lever and actuating section position
Spool symbols A1 standard, lever on side A, upward
see the table “Spool Symbols“ B1 standard, lever on side B, upward
The port restrictor plugs can be ordered separately from the spare parts data sheet HA 8010.
The table of spool connections is an overview of preferred and commonly produced types.
Contact our technical support for their identification, feasibility and operating limits.
www.argo-hytos.com Page 2
Subject to change · RPR3-06_4004_3en_06/2019