Professional Documents
Culture Documents
2.8.3.26 Parameter change (Function call Event: Effect ) 2.8.3.29 Parameter change (Key remote)
Reception Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON. This is echoed if [Parameter change ECHO] is ON.
When this is received, the corresponding effect’s function activates (depending When this is received, the same processing that is executed when the key speci-
on the effect type). fied by Address is pressed (released).
STATUS 11110000 F0 System exclusive message Transmission
ID No. 01000011 43 Manufacture’s ID number (YAMAHA) If [Parameter Change ECHO] is ON, this message is retransmitted without
SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel) change.
GROUP ID 00111110 3E MODEL ID (digital mixer) STATUS 11110000 F0 System exclusive message
MODEL ID 01111111 7F Universal ID No. 01000011 43 Manufacture’s ID number (YAMAHA)
ADDRESS 00010010 12 Function call Effect Event SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel)
0000ffff 0f function GROUP ID 00111110 3E MODEL ID (digital mixer)
00000000 00 MODEL ID 00001101 0D 01V96
0ppppppp pp Release:0, Press:1 ADDRESS 00100000 20 Key remote
DATA 00000000 00 0kkkkkkk kk Key address H
0eeeeeee ee Effect number (0:Effect1 - 3:Effect4) 0kkkkkkk kk Key address M
EOX 11110111 F7 End of exclusive 0kkkkkkk kk Key address L
DATA 0ppppppp pp Release:0, Press:1
EOX 11110111 F7 End of exclusive
function channel
Freeze Play button 0x00 0:Effect1-3:Effect4
Freeze Record button 0x01 0:Effect1-3:Effect4
2.8.3.30 Parameter change (Remote Meter)
When transmission is enabled by receiving a Request of Remote meter, the
• This does not activate when the effect type is different. specified meter information is transmitted every 50 msec for 10 seconds. When
you want to transmit meter information continuously, a Request must be trans-
2.8.3.27 Parameter change (Sort Table)
mitted continuously within every 10 seconds.
When scene memory sort is executed on the 01V96, the memory sort table will
be transmitted to Studio Manager. Reception
Studio Manager will sort the memories according to this data. This is echoed if [Parameter change ECHO] is ON.
If Studio Manager performs a scene memory sort, it will transmit this data to Transmission
the 01V96. When transmission has been enabled by a Request, the parameter specified by
STATUS 11110000 F0 System exclusive message Address will be transmitted on the [Rx CH] channel at 50 msec intervals for a
ID No. 01000011 43 Manufacture’s ID number (YAMAHA) duration of 10 seconds.
n=0-15 (Device number=MIDI Channel)
Transmission will be disabled if the power is turned off and on again, or if the
SUB STATUS 0001nnnn 1n
PORT setting is changed.
GROUP ID 00111110 3E MODEL ID (digital mixer)
If [Parameter Change ECHO] is ON, this message is retransmitted without
MODEL ID 00001101 0D 01V96
change.
ADDRESS 00010011 13 Library sort table
STATUS 11110000 F0 System exclusive message
0000ffff 0f Library type
ID No. 01000011 43 Manufacture’s ID number (YAMAHA)
DATA 0ddddddd ds Data
SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel)
: :
GROUP ID 00111110 3E MODEL ID (digital mixer)
0ddddddd de Data
MODEL ID 00001101 0D 01V96
EOX 11110111 F7 End of exclusive
ADDRESS 00100001 21 Remote meter
8-7 conversion is performed on the data area in the same way as for bulk. 0mmmmmmm mm ADDRESS UL
0mmmmmmm mm ADDRESS LU
2.8.3.28 Parameter request (Sort Table) ADDRESS LL
0mmmmmmm mm
When the 01V96 receives this data, it will transmit Sort Table Data. DATA 0ddddddd dd Data1 H
GROUP ID 00111110 3E MODEL ID (digital mixer) * Meter data uses the unmodified DECAY value of the DSP. The inter-
MODEL ID 00001101 0D 01V96 pretation of the data will depend on the parameter.
ADDRESS 00010011 13 Library sort table
0000ffff 0f Library type
EOX 11110111 F7 End of exclusive
01V96—Owner’s Manual
2.8.3.31 Parameter request (Remote Meter) 2.8.3.33 Parameter request (Remote Time Counter)
Reception Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON. change ECHO] is ON.
When this is received, data of the specified address is transmitted on the [Rx When this is received, the Time Counter information is transmitted on the [Rx
CH] at intervals of 50 msec as a rule (although this may not be the case if the CH] channel every 50 msec for 10 seconds.
port is being used by other communication), for a period of 10 seconds. When the second byte of Address is received on 0x7F, data transmission will be
If Address UL= 0x7F is received, transmission of all meter data will be halted halted immediately. (disable)
immediately. (disable)
Transmission
Transmission If [Parameter Change ECHO] is ON, this message is retransmitted without
If [Parameter Change ECHO] is ON, this message is retransmitted without change.
change. System exclusive message
STATUS 11110000 F0
STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture’s ID number (YAMAHA)
ID No. 01000011 43 Manufacture’s ID number (YAMAHA) SUB STATUS 0011nnnn 3n n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E MODEL ID (digital mixer)
GROUP ID 00111110 3E MODEL ID (digital mixer) MODEL ID 00001101 0D 01V96
MODEL ID 00001101 0D 01V96 ADDRESS 00100010 22 Remote Time counter
ADDRESS 00100001 21 Remote meter 0ddddddd 0:Transmission request,
dd
0mmmmmmm mm ADDRESS UL 0x7F:Transmission stop request
01V96—Owner’s Manual
Appendix D: Options
Rack Mounting the 01V96 Using RK1 Rack Mount Kit
You can rack mount the 01V96 using an optional RK1 Rack Mount Kit.
1 Hold one of the brackets against one side of the 01V96 so that the bracket
ear projects to the side, and align three holes on the bracket with the holes
on the side of the 01V96, as shown in the illustration below.
2 Affix the bracket using three screws included in the RK1 package.
3 Attach the other bracket to the other side of the 01V96 in the same way.
01V96—Owner’s Manual
01V96—Owner’s Manual
01V96—Owner’s Manual
01V96—Owner’s Manual
GANG ............................................85 Meter display mode ................... 191 RING MOD. ......................................262
INDIVIDUAL ...............................85 MIDI ........................................... 187 RK1 rack mount kit ...........................323
INV GANG ...................................85 Muting ........................................ 197 ROTARY ............................................261
PAN buttons .................................86 OMS ............................................ 187 Rotary controls & faders .....................29
Parameter boxes ..................................29 Panning ...............................196, 197 Routing .................................................86
Parameter changes ............................221 Plug-ins ....................................... 198
Parameter lists ...................................241 Pre or Post .................................. 196 S
Parameter wheel ..................................22 Scrub & Shuttle .......................... 200 Sampling rates ............................... 72, 73
Patch | 2TR Out page ........................125 Selecting ...................................... 195 DOUBLE CHANNEL ...................75
Patch | Cascade In page .....................236 Send levels ................................... 197 DOUBLE SPEED ..........................75
Patch | Direct Out page .....................125 Soloing ........................................ 196 Sampling rate indicator ................28
Patch | Effect page .......................66, 154 Program changes .......................211, 215 Setting the higher sampling rates
Patch | IN LIB page ...........................174 PROTECT button ............................. 164 ..........................................75
Patch | IN Name page .........................94 SINGLE ..........................................76
Patch | In Name page ........................225 Q SRC sections ..................................72
Patch | In Patch page ...................43, 122 Q control .............................................. 20 Scene | In Fade page ...........................166
Patch | Insert In page ........................129 Q, EQ ................................................... 84 Scene | Out Fade page .......................167
Patch | Out LIB page .........................175 Scene | Rcl Safe page ..........................168
Patch | Out Name page .............107, 226 R Scene | Scene page ..............................164
Patch | Out Patch page ....... 44, 124, 235 Scene | Sort page ................................169
Rear Panel
PATCH button ............................18, 122 SCENE button .....................................18
PHANTOM +48V ....................... 23
Patch Confirmation preference .......227 Scene MEM Auto Update preference
Rear panel ............................................ 23
Patching .............................................121 ................................................228
AD output section ........................ 23
2TR digital outputs .....................125 Scene memories .................................161
Digital I/O section ........................ 24
ADAT OUT connector ..............124 Auto update function .................165
MIDI/Control Section ................. 25
Direct outs ...................................125 Edit indicators .............................162
Power section ............................... 25
Input and Output .........................43 Fading ..........................................166
SLOT section ................................ 25
Input channels ..............................43 PROTECT button .......................164
RECALL button .................................. 21
Input patching ....................121, 122 Recall safe function .....................168
Recall Confirmation preference ....... 227
Insert in .......................................129 Scene numbers ............................162
Recall safe function ........................... 168
Insert patching ............................127 Shadow memory .........................165
RECORDING .................................... 132
OMNI OUT connector ..............124 Sorting .........................................169
Remote ............................................... 185
Omni outs .....................................44 Storing & Recalling .....................163
FRAMES ..................................... 210
Output patching .........................123 Using the Scene Memory Page ..164
Insert display mode .................... 189
PATCH button .............................43 What is stored .............................161
LOCATE/TIME section ............. 209
PEAK indicators ............................15, 70 Scene memory #00 .............................162
Machine control .................185, 208
Peak level ..............................................36 Scene memory #Ud ...........................162
MACHINE CONTROL section
PHANTOM +48V ...............................23 SCENE MEMORY section ..................21
........................................ 209
Phantom Power ...................................69 Scene numbers ...................................162
MIDI messages ........................... 205
CH1–4 ON/OFF switch ...............23 Scene up/down buttons ......................21
MIDI remote .............................. 203
CH5–8 ON/OFF switch ...............23 SEL buttons ................................... 16, 17
Nuendo ....................................... 185
CH9–12 ON/OFF switch .............23 SELECTED CHANNEL section .........20
ProTools ...................................... 185
Phase .....................................................79 Selecting channels ................................32
REMOTE .................................... 185
PHASER .............................................259 Selecting display pages .........................28
Target parameter ........................ 188
PHONES jack ..............................15, 131 Selecting fader modes ..........................33
TRACK ARMING section ......... 209
PHONES LEVEL control ....................15 Setting levels .......................................113
TRANSPORT section ................ 210
PLUG-IN ...........................................223 Setup .....................................................37
REMOTE button ........................ 19, 185
Plug-ins ..............................................198 Shadow memory ................................165
Remote Layer
Y56K ............................................159 SHIFT LOCK button ...........................30
Nuendo ....................................... 202
POWER ON/OFF switch ....................25 SIGNAL indicators ....................... 15, 70
Pro tools ...................................... 186
Power section .......................................25 SINGLE .................................................76
RESET BOTH ...................................... 93
Prefer1 page .......................................226 SLOT ................................25, 42, 71, 212
REV+CHORUS ................................ 265
Prefer2 page .......................................228 SLOT section ........................................25
REV+FLANGE .................................. 266
Preferences .........................................226 Solo .....................................................132
REV+SYMPHO. ............................... 267
Pro tools ............................ 185, 186, 196 LAST SOLO .................................132
REV->CHORUS ............................... 265
Automation .................................201 LISTEN ........................................132
REV->FLANGE ................................ 266
Channel display mode ................191 MIX SOLO ..................................132
REV->PAN ........................................ 268
Channel levels .............................195 MIXDOWN ................................132
REV->SYMPHO. .............................. 267
Control surface operation ..........192 RECORDING .............................132
REVERB HALL ................................. 254
Explicit mute ...............................196 SOLO ...........................................132
REVERB PLATE ............................... 254
Flip mode ....................................197 Solo function ...............................134
REVERB ROOM ............................... 254
Implicit mute ..............................196 SOLO SAFE CHANNEL ............133
REVERB STAGE ............................... 254
Insert display mode ....................189
REVERSE GATE ............................... 255
01V96—Owner’s Manual
01V96—Owner’s Manual
01V96—Owner’s Manual
Note X 0–127
True Voice
Number ************** X
Note On X O
Velocity Effect Control
Note Off X O
Key’s X X
After
Ch’s X X
Pitch Bend X X
Control
0-95,102-119 O O Assignable
Change
System Exclusive O O *1
:Song Pos X X
System
:Song Sel X X
Common
:Tune X X
System :Clock X O
Effect Control
Real Time :Commands X X
:Local ON/OFF X X
Aux :All Notes OFF X X
Messages :Active Sense X O
:Reset X O