Professional Documents
Culture Documents
5. When using a vernier call per with no knife edges to measure the internal diameter of a bush,
you
a) add the dimensions of the nibs
b) ignore the dimensions of the nibs
c) subtract the dimensions of the nibs
Ans a) add the dimensions of the nibs
6. The liquid applied to a component being checked by magnetic particle inspection is for
a) acting as a transmission medium for the test
b) to prevent corrosion occurring from contact with the probe
c) to prevent scratching of the surface by the probe
Ans a) acting as a transmission medium for the test
7. The most appropriate fire extinguisher for an aircraft wheel and brake fire would be
a) dry powder
b) water
c) carbon dioxide
Ans a) dry powder
9. A flat chisel being used for aluminum should have a point angle of
a) 30 degrees
b) 65 degrees
c) 55 degrees
Ans a) 30 degrees
a) Resistance test
b) Continuity test
c) Bonding test
Ans b) Continuity test
12. Units of torque are
13. The value of the insulation resistance of an electric motor compared to its supply leads is
a) greater
b) smaller
c) same
Ans b) smaller
a) chemically by trichloroethylene
b) mechanically by buffing
c) chemically by sulphuric acid solution
Ans c) chemically by sulphuric acid solution