The document provides dimensions for fabricating an angle iron structure. It consists of a 75x75x6 angle iron with all edges cut into two pieces diagonally. A 1/2 inch thick plate is cut into the angle iron. The structure includes a 2440mm diameter solid column surrounded by 2x4 supports and reinforced with a 200x20mm thick rib welded to the underside of the plate in four places.
The document provides dimensions for fabricating an angle iron structure. It consists of a 75x75x6 angle iron with all edges cut into two pieces diagonally. A 1/2 inch thick plate is cut into the angle iron. The structure includes a 2440mm diameter solid column surrounded by 2x4 supports and reinforced with a 200x20mm thick rib welded to the underside of the plate in four places.
The document provides dimensions for fabricating an angle iron structure. It consists of a 75x75x6 angle iron with all edges cut into two pieces diagonally. A 1/2 inch thick plate is cut into the angle iron. The structure includes a 2440mm diameter solid column surrounded by 2x4 supports and reinforced with a 200x20mm thick rib welded to the underside of the plate in four places.