Professional Documents
Culture Documents
Riving knife
Paddle switch
Tilt handle
Blade height
handle
Check blade height. The blade must not extend more than ________ 1/8"
Always stand to the ___________ left of the blade when cutting. Never
stand to the _____________
left or directly behind the blade.
Never force wood into the saw _____________ more than it can cut.
removing
Unplug the saw before ___________________ the blade.
Always reset the saw adjustments to the ______________ zero position
(blade at 90 deg. to the table) after finishing an operation that required a
special set-up.
ripped
When ripping, the piece to be ____________ should be between the
blade and the fence. Also, push the piece all the way ____________ through the
blade.
Never back out! Backing the wood out of a cut will cause a
kick back
_________________. If you need to stop a cut or remove the wood,
always stop the saw.