Professional Documents
Culture Documents
Cone
Cone
resistance
resistance Sleeve
Sleeve
friction
friction Pore
Pore
pressure
pressure
0 0 0
0 .5 0 .5 0 .5
1 1 1
1 .5 1 .5 1 .5
2 2 2
2 .5 2 .5 2 .5
3 3 3
3 .5 3 .5 3 .5
4 4 4
Depth (m)
Depth (m)
Depth (m)
4 .5 4 .5 4 .5
5 5 5
5 .5 5 .5 5 .5
6 6 6
6 .5 6 .5 6 .5
7 7 7
7 .5 7 .5 7 .5
8 8 8
8 .5 8 .5 8 .5
9 9 9
- 0 .5 0 0 .5 1 1 .5 2 0 20 40 60 0 50
Tip resistance (MPa) Friction (kPa) Pressure (kPa)
The plot below presents the cross correlation coeficient between the raw qc and fs values (as measured on the field). X axes presents the lag
distance (one lag is the distance between two sucessive CPT measurements).
Cross correlation
Cross correlation
between qcbetween
& fs qc & fs
1.2
0.8
0.6
0.4
0.2
5
0
-20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20
-0.2
-0.4
-0.6
-0.8
-1
-1.2
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:10 PM 1
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
SBT - Bq plots
SBTSBT
plotplot Bq plot
Bq plot
1 ,0 0 0 1 ,0 0 0
10
10
1
-0 .6 0 - 0 .4 0 -0 .2 0 0 .0 0 0 .2 0 0 .4 0 0 .6 0 0 .8 0 1 .0 0 1 .2 0 1 .4 0
Pore pressure ratio, Bq
1
0 .1 1 10 SBT legend
Friction Ratio, Rf (%) 1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravelly sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:10 PM 2
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
SBTn
SBTn
plotplot Normalized
Normalized
Bq plot
Bq plot
1 ,0 0 0 1 ,0 0 0
100
100
10
10
1
-0 .6 0 - 0 .4 0 -0 .2 0 0 .0 0 0 .2 0 0 .4 0 0 .6 0 0 .8 0 1 .0 0 1 .2 0 1 .4 0
Pore pressure ratio, Bq
1
0 .1 1 10 SBTn legend
Normalized Friction Ratio, Fr (%)
1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravelly sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:10 PM 3
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Bq plots (Schneider)
Schneider
Schneider
et alet(2008)
al (2008)
SoilSoil
Class.
Class. Schneider
Schneider
et alet(2008)
al (2008)
SoilSoil
Class.
Class.
1 ,0 0 0 1 ,0 0 0
Essentialy Essentialy
Drained Drained
Sands Sands
ils
l So
a
o ils on
s
2 2 iti
ay
al S
s
tio n ns
Cl
ay
s i a
n Tr
Cl
Tra
I r"
ow
100 100
"L
3 ys 3
Cla
ys
I r"
an
ow
Q = qcnet/sig'v
Q = qcnet/sig'v
la
d "L
C
l ts
s an
ve
Sil t
Si
iti
1a 1a
ns
Se
ys 1b
C la
1b
1c 1c
10 10
ys
e Cla
s itiv
Sen
1 1
-2 -1 0 1 2 3 4 5 6 7 8 9 10 0 .1 1 10 100
Du2/sig'v Du2/sig'v
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:10 PM 4
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
SoilSoil
Behaviour
Behaviour
Type
Type Fuzzy
Fuzzy
Classification
Classification
0
0 .5 0 .5
1 1
1 .5 1 .5
2 2
2 .5 2 .5
3 3
3 .5 3 .5
4 4
Depth (m)
Depth (m)
4 .5 4 .5
5 5
5 .5 5 .5
6 6
6 .5 6 .5
7 7
7 .5 7 .5
8 8
8 .5 8 .5
9 9
0 2 4 6 8 10 12 14 16 18 0 20 40 60 80 100
SBTn (Robertson 1990) Probability of Soil Types (%)
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:10 PM 5
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Cone
Cone
resistance
resistance
qt qt Friction
Friction
ratio
ratio Pore
Pore
pressure
pressure
u u SBTSBT
Index
Index SoilSoil
Behaviour
Behaviour
Type
Type
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
Sensitive fine grained
2 2 2 2 2
2 .5 2 .5 2 .5 2 .5 2 .5
3 3 3 3 3
3 .5 3 .5 3 .5 3 .5 3 .5
Silty sand & sandy silt
4 4 4 4 4
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 .5 4 .5 4 .5 4 .5 4 .5
5 5 5 5 5
Silty sand & sandy silt
5 .5 5 .5 5 .5 5 .5 5 .5 Clay & silty clay
Clay
6 6 6 6 6
Clay & silty clay
6 .5 6 .5 6 .5 6 .5 6 .5
Clay
7 7 7 7 7
0 1 0 2 4 6 8 10 0 50 1 2 3 4 0 2 4 6 8 10 12 14 16 18
Tip resistance (MPa) Rf (%) Pressure (kPa) I(SBT) SBT (Robertson, 2010)
SBT legend
1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravely sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:11 PM 6
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
cone
cone
resistance
resistance Norm.
Norm.
friction
friction
ratio
ratio Norm.
Norm.
pore
pore
pressure
pressure
ratio
ratio SBTn
SBTn
Index
Index Norm.
Norm.
SoilSoil
Behaviour
Behaviour
Type
Type
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
2 2 2 2 2
2 .5 2 .5 2 .5 2 .5 2 .5
3 3 3 3 3
3 .5 3 .5 3 .5 3 .5 3 .5
Silty sand & sandy silt
4 4 4 4 4
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 .5 4 .5 4 .5 4 .5 4 .5
5 5 5 5 5
Silty sand & sandy silt
5 .5 5 .5 5 .5 5 .5 5 .5 Clay & silty clay
Clay
6 6 6 6 6
Clay & silty clay
6 .5 6 .5 6 .5 6 .5 6 .5
Clay
7 7 7 7 7
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:11 PM 7
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
cone
cone
resistance
resistance Norm.
Norm.
friction
friction
ratio
ratio Norm.
Norm.
pore
pore
pressure
pressure
ratio
ratio Mod.
Mod.
SBTn
SBTn
I(B)
I(B) Mod.
Mod.
Norm.
Norm.
SBTn
SBTn
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
2 2 2 2 2
2 .5 2 .5 2 .5 2 .5 2 .5
3 3 3 3 3
3 .5 3 .5 3 .5 3 .5 3 .5
Sand-like - Contractive
4 4 4 4 4
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 .5 4 .5 4 .5 4 .5 4 .5
5 5 5 5 5
Sand-like - Contractive
5 .5 5 .5 5 .5 5 .5 5 .5 Transitional - Contractive
Clay-like - Contractive
6 6 6 6 6
Transitional - Contractive
6 .5 6 .5 6 .5 6 .5 6 .5
Clay-like - Contractive
7 7 7 7 7
Clay-like - Contractive - Sensitive
Clay-like - Contractive - Sensitive
7 .5 7 .5 7 .5 7 .5 7 .5 Clay-like - Contractive
Clay-like - Contractive
8 8 8 8 8 Clay-like - Contractive - Sensitive
Clay-like - Contractive - Sensitive
8 .5 8 .5 8 .5 8 .5 8 .5
Clay-like - Contractive - Sensitive
9 9 9 9 9 Clay-like - Contractive
32 22
0 100 200 300 400 0 2 4 6 8 10 -2 0 2 4 6 8 10 100 10 0 2 4 6 8 10 12 14 16 18
Qtn Fr (%) U2 I Mod. SBTn (Robertson 2016)
B
Mod. SBTn legend
1. CCS: ClayLike - Contractive, Sensitive 4. TC: Transitional - Contractive 7. SD: Sand-like - Dilative
2. CC: Clay-like - Contractive 5. TD: Transitional - Dilative
3. CD: Clay-Like: Dilative 6. SC: Sand-like - Contractive
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:11 PM 8
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Modified
Modified
Robertson
Robertson
(2016)
(2016)
SBTn
SBTn Modified
Modified
Schneider
Schneider
et alet(2008)
al (2008)
SBTnSBTn Normalized
Normalized
Rigidity
Rigidity
Index
Index
1 ,0 0 0 1 ,0 0 0 1 ,0 0 0
SD
IB=32
Normalized Cone Resistance, Qtn
TC
TD CC
SC CCS
CD
K*
TC
(G
10 10 10
)=
K*
33
(G
0
)=
CCS CC
10
0
1 1 1
0 .1 1 10 -2 0 2 4 6 8 10 12 14 16 18 20 1 10 100 1 ,0 0 0
Normalized Friction Ratio, Fr (%) Du2/sig'v Go/qn
CCS: Clay-like - Contractive - Sensitive K(G) > 330: Soils with significant microstructure
CC: Clay-like - Contractive (e.g. age/cementation)
CD: Clay-like - Dilative
TC: Transitional - Contractive
TD: Transitional - Dilative
SC: Sand-like - Contractive
SD: Sand-like - Dilative
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:11 PM 9
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Permeability
Permeability SPTSPT
N60N60 Young's
Young's
modulus
modulus Relative
Relative
density
density Friction
Friction
angle
angle
3 .8 3 .8 3 .8 3 .8
4 0 .5
4 4 4
4 .2
1
4 .4 4 .2 4 .2 4 .2
4 .6 1 .5
4 .4 4 .4 4 .4
4 .8
2
5 4 .6 4 .6 4 .6
5 .2 2 .5
4 .8 4 .8 4 .8
5 .4
3
5 .6 5 5 5
5 .8 3 .5
5 .2 5 .2 5 .2
6
4
5 .4 5 .4 5 .4
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
6 .2
6 .4 4 .5
5 .6 5 .6 5 .6
6 .6
5 5 .8 5 .8 5 .8
6 .8
7 5 .5 6 6 6
7 .2
6 6 .2 6 .2 6 .2
7 .4
7 .6 6 .5 6 .4 6 .4 6 .4
7 .8
7 6 .6 6 .6 6 .6
8
8 .2 7 .5 6 .8 6 .8 6 .8
8 .4
8 7 7 7
8 .6
8 .8 8 .5 7 .2 7 .2 7 .2
9
9 7 .4 7 .4 7 .4
9 .2
-9 -6 -3 +0 0 10 20 30 40 50 0 10 20 0 20 40 60 80 100 30 35 40 45 50
1 x1 0 1 x1 0 1 x1 0 1 x1 0
Ksbt (m/s) N60 (blows/30cm) Es (MPa) Dr (%) φ (degrees)
Calculation parameters
Permeability: Based on SBTn Relative density constant, CDr: 350.0
SPT N60 : Based on Ic and qt Phi: Based on Kulhawy & Mayne (1990)
Young’s modulus: Based on variable alpha using Ic (Robertson, 2009) User defined estimation data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:12 PM 10
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Constrained
Constrained
Modulus
Modulus Shear
Shear
modulus
modulus Shear
Shear
strength
strength Undrained
Undrained
strength
strength
ratio
ratio OCR
OCR
0 0
Su peak 5 .4
0 .5 Su remolded
5 .6
1 1 5 .8
1 .5 6 6 6
2 2 6 .2
2 .5 6 .4
3 3 6 .6
3 .5 6 .8
4 4 7 7 7
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 .5 7 .2
7 .4
5 5
7 .6
5 .5
7 .8
6 6
8 8 8
6 .5
8 .2
7 7
8 .4
7 .5
8 .6
8 8
8 .8
8 .5
9 9 9
9 9
9 .2
0 10 20 0 50 100 0 50 0 1 2 3 4 0 5 10 15 20
M(C PT) (MPa) Go (MPa) Su (kPa) Su/σ',vo OC R
Calculation parameters
Constrained modulus: Based on variable alpha using Ic and Qtn (Robertson, 2009) OCR factor for clays, Nkt: 0.33
Go: Based on variable alpha using Ic (Robertson, 2009) User defined estimation data
Undrained shear strength cone factor for clays, Nkt: 14 Flat Dilatometer Test data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:12 PM 11
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Shear
Shear
Wave
Wave
velocity
velocity State
State
parameter
parameter In-situ
In-situ
stress
stress
ratio
ratio SoilSoil
sensitivity
sensitivity Effective
Effective
friction
friction
angle
angle
0 3 .8 5 .4 5 .4
0 .5 4 5 .6 5 .6
1 4 .2 5 .8 5 .8
1 .5 4 .4 6 6
2 4 .6 6 .2 6 .2
2 .5 4 .8 6 .4 6 .4
3 5 6 .6 6 .6
3 .5 6 .8 6 .8
5 .2
4 7 7
5 .4
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 .5 7 .2 7 .2
5 .6 0
7 .4 7 .4
5 5 .8
7 .6 7 .6
5 .5 6
7 .8 7 .8
6 6 .2
8 8
6 .5 6 .4
8 .2 8 .2
7 6 .6
8 .4 8 .4
7 .5 6 .8
8 .6 8 .6
8 7
8 .8 8 .8
8 .5 7 .2
9 9
9 7 .4
9 .2 9 .2
100 200 - 0 .2 - 0 .1 0 0 .1 0 0 .5 1 1 .5 2 2 .5 3 0 2 4 6 8 10 20 25 30 35 40
Vs (m/s) ψ Ko St Peak φ (degrees)
Calculation parameters
Soil Sensitivity factor, NS: 7.00
User defined estimation data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:12 PM 12
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C1
Geotechnical Engineers Total depth: 9.20 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Bearing
Bearing
Capacity
Capacity
175
170
165
Ultimate Bearing Capacity (kPa) 160
155
150
145
140
135
130
125
120
115
Bearing Capacity calculation is 110
perfromed based on the formula: 105
:: Tabular results ::
No B Start End Depth Ave. qt Rk Soil Press. Ult. bearing
(m) Depth (m) (MPa) (kPa) cap. (kPa)
(m)
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:12 PM 13
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Cone
Cone
resistance
resistance Sleeve
Sleeve
friction
friction Pore
Pore
pressure
pressure
0 0 0
0 .5 0 .5 0 .5
1 1 1
1 .5 1 .5 1 .5
2 2 2
2 .5 2 .5 2 .5
3 3 3
3 .5 3 .5 3 .5
Depth (m)
Depth (m)
Depth (m)
4 4 4
4 .5 4 .5 4 .5
5 5 5
5 .5 5 .5 5 .5
6 6 6
6 .5 6 .5 6 .5
7 7 7
7 .5 7 .5 7 .5
8 8 8
8 .5 8 .5 8 .5
- 0 .5 0 0 .5 1 1 .5 0 10 20 30 40 0 20 40 60 80
Tip resistance (MPa) Friction (kPa) Pressure (kPa)
The plot below presents the cross correlation coeficient between the raw qc and fs values (as measured on the field). X axes presents the lag
distance (one lag is the distance between two sucessive CPT measurements).
Cross correlation
Cross correlation
between qcbetween
& fs qc & fs
1.2
0.8
0.6
0.4
20
0.2
0
-20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20
-0.2
-0.4
-0.6
-0.8
-1
-1.2
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:12 PM 14
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
SBT - Bq plots
SBTSBT
plotplot Bq plot
Bq plot
1 ,0 0 0 1 ,0 0 0
10
10
1
-0 .6 0 - 0 .4 0 -0 .2 0 0 .0 0 0 .2 0 0 .4 0 0 .6 0 0 .8 0 1 .0 0 1 .2 0 1 .4 0
Pore pressure ratio, Bq
1
0 .1 1 10 SBT legend
Friction Ratio, Rf (%) 1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravelly sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:12 PM 15
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
SBTn
SBTn
plotplot Normalized
Normalized
Bq plot
Bq plot
1 ,0 0 0 1 ,0 0 0
100
100
10
10
1
-0 .6 0 - 0 .4 0 -0 .2 0 0 .0 0 0 .2 0 0 .4 0 0 .6 0 0 .8 0 1 .0 0 1 .2 0 1 .4 0
Pore pressure ratio, Bq
1
0 .1 1 10 SBTn legend
Normalized Friction Ratio, Fr (%)
1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravelly sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:12 PM 16
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Bq plots (Schneider)
Schneider
Schneider
et alet(2008)
al (2008)
SoilSoil
Class.
Class. Schneider
Schneider
et alet(2008)
al (2008)
SoilSoil
Class.
Class.
1 ,0 0 0 1 ,0 0 0
Essentialy Essentialy
Drained Drained
Sands Sands
ils
l So
a
o ils on
s
2 2 iti
ay
al S
s
tio n ns
Cl
ay
s i a
n Tr
Cl
Tra
I r"
ow
100 100
"L
3 ys 3
Cla
ys
I r"
an
ow
Q = qcnet/sig'v
Q = qcnet/sig'v
la
d "L
C
l ts
s an
ve
Sil t
Si
iti
1a 1a
ns
Se
ys 1b
C la
1b
1c 1c
10 10
ys
e Cla
s itiv
Sen
1 1
-2 -1 0 1 2 3 4 5 6 7 8 9 10 0 .1 1 10 100
Du2/sig'v Du2/sig'v
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:12 PM 17
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
SoilSoil
Behaviour
Behaviour
Type
Type Fuzzy
Fuzzy
Classification
Classification
0
0 .5 0 .5
1 1
1 .5 1 .5
2 2
2 .5 2 .5
3 3
3 .5 3 .5
4 4
Depth (m)
Depth (m)
4 .5 4 .5
5 5
5 .5 5 .5
6 6
6 .5 6 .5
7 7
7 .5 7 .5
8 8
8 .5 8 .5
0 2 4 6 8 10 12 14 16 18 0 20 40 60 80 100
SBTn (Robertson 1990) Probability of Soil Types (%)
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:12 PM 18
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Cone
Cone
resistance
resistance
qt qt Friction
Friction
ratio
ratio Pore
Pore
pressure
pressure
u u SBTSBT
Index
Index SoilSoil
Behaviour
Behaviour
Type
Type
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
Sensitive fine grained
2 2 2 2 2
2 .5 2 .5 2 .5 2 .5 2 .5
3 3 3 3 3
3 .5 3 .5 3 .5 3 .5 3 .5
Clay & silty clay
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 4 4 4 4 Sensitive fine grained
Clay & silty clay
4 .5 4 .5 4 .5 4 .5 4 .5
Clay
5 5 5 5 5
Sensitive fine grained
5 .5 5 .5 5 .5 5 .5 5 .5
6 .5 6 .5 6 .5 6 .5 6 .5
Clay
7 7 7 7 7 Sensitive fine grained
Clay
7 .5 7 .5 7 .5 7 .5 7 .5
Clay
8 8 8 8 8
0 .5 2 4 6 0 50 1 2 3 4 0 2 4 6 8 10 12 14 16 18
Tip resistance (MPa) Rf (%) Pressure (kPa) I(SBT) SBT (Robertson, 2010)
SBT legend
1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravely sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:13 PM 19
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
cone
cone
resistance
resistance Norm.
Norm.
friction
friction
ratio
ratio Norm.
Norm.
pore
pore
pressure
pressure
ratio
ratio SBTn
SBTn
Index
Index Norm.
Norm.
SoilSoil
Behaviour
Behaviour
Type
Type
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
2 2 2 2 2
2 .5 2 .5 2 .5 2 .5 2 .5
3 3 3 3 3
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 4 4 4 4
Silty sand & sandy silt
4 .5 4 .5 4 .5 4 .5 4 .5 Clay & silty clay
5 5 5 5 5 Clay
Clay
7 7 7 7 7 Sensitive fine grained
Clay
7 .5 7 .5 7 .5 7 .5 7 .5
Organic soil
Clay
8 8 8 8 8
Sensitive fine grained
8 .5 8 .5 8 .5 8 .5 8 .5
Organic soil
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:13 PM 20
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
cone
cone
resistance
resistance Norm.
Norm.
friction
friction
ratio
ratio Norm.
Norm.
pore
pore
pressure
pressure
ratio
ratio Mod.
Mod.
SBTn
SBTn
I(B)
I(B) Mod.
Mod.
Norm.
Norm.
SBTn
SBTn
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
2 2 2 2 2
2 .5 2 .5 2 .5 2 .5 2 .5
3 3 3 3 3
3 .5 3 .5 3 .5 3 .5 3 .5 Sand-like - Contractive
Sand-like - Contractive
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 4 4 4 4
Sand-like - Contractive
4 .5 4 .5 4 .5 4 .5 4 .5 Clay-like - Contractive - Sensitive
Clay-like - Contractive
5 5 5 5 5
5 .5 5 .5 5 .5 5 .5 5 .5
6 .5 6 .5 6 .5 6 .5 6 .5
Clay-like - Contractive
7 7 7 7 7
Clay-like - Contractive - Sensitive
7 .5 7 .5 7 .5 7 .5 7 .5
Clay-like - Contractive
8 8 8 8 8
Clay-like - Contractive - Sensitive
8 .5 8 .5 8 .5 8 .5 8 .5
Clay-like - Contractive
32 22
0 100 200 300 400 0 2 4 6 8 10 -2 0 2 4 6 8 10 100 10 0 2 4 6 8 10 12 14 16 18
Qtn Fr (%) U2 I Mod. SBTn (Robertson 2016)
B
Mod. SBTn legend
1. CCS: ClayLike - Contractive, Sensitive 4. TC: Transitional - Contractive 7. SD: Sand-like - Dilative
2. CC: Clay-like - Contractive 5. TD: Transitional - Dilative
3. CD: Clay-Like: Dilative 6. SC: Sand-like - Contractive
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:14 PM 21
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Modified
Modified
Robertson
Robertson
(2016)
(2016)
SBTn
SBTn Modified
Modified
Schneider
Schneider
et alet(2008)
al (2008)
SBTnSBTn Normalized
Normalized
Rigidity
Rigidity
Index
Index
1 ,0 0 0 1 ,0 0 0 1 ,0 0 0
SD
IB=32
Normalized Cone Resistance, Qtn
TC
TD CC
SC CCS
CD
K*
TC
(G
10 10 10
)=
K*
33
(G
0
)=
CCS CC
10
0
1 1 1
0 .1 1 10 -2 0 2 4 6 8 10 12 14 16 18 20 1 10 100 1 ,0 0 0
Normalized Friction Ratio, Fr (%) Du2/sig'v Go/qn
CCS: Clay-like - Contractive - Sensitive K(G) > 330: Soils with significant microstructure
CC: Clay-like - Contractive (e.g. age/cementation)
CD: Clay-like - Dilative
TC: Transitional - Contractive
TD: Transitional - Dilative
SC: Sand-like - Contractive
SD: Sand-like - Dilative
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:14 PM 22
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Permeability
Permeability SPTSPT
N60N60 Young's
Young's
modulus
modulus Relative
Relative
density
density Friction
Friction
angle
angle
3 .6 3 .5 5 3 .5 5 3 .5 5
3 .8 0 .5
3 .6 3 .6 3 .6
4 1
4 .2 3 .6 5 3 .6 5 3 .6 5
1 .5
4 .4
3 .7 3 .7 3 .7
4 .6 2
4 .8 3 .7 5 3 .7 5 3 .7 5
2 .5
5
3 .8 3 .8 3 .8
5 .2 3
5 .4 3 .5 3 .8 5 3 .8 5 3 .8 5
5 .6
4 3 .9 3 .9 3 .9
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
5 .8
6 4 .5 3 .9 5 3 .9 5 3 .9 5
6 .2
5 4 4 4
6 .4
6 .6 5 .5 4 .0 5 4 .0 5 4 .0 5
6 .8 6
4 .1 4 .1 4 .1
7
6 .5
7 .2 4 .1 5 4 .1 5 4 .1 5
7 .4 7
4 .2 4 .2 4 .2
7 .6
7 .5
7 .8 4 .2 5 4 .2 5 4 .2 5
8 8
4 .3 4 .3 4 .3
8 .2 8 .5
8 .4 4 .3 5 4 .3 5 4 .3 5
-9 -6 -3 +0 0 10 20 30 40 50 0 5 10 0 20 40 60 80 100 30 35 40 45 50
1 x1 0 1 x1 0 1 x1 0 1 x1 0
Ksbt (m/s) N60 (blows/30cm) Es (MPa) Dr (%) φ (degrees)
Calculation parameters
Permeability: Based on SBTn Relative density constant, CDr: 350.0
SPT N60 : Based on Ic and qt Phi: Based on Kulhawy & Mayne (1990)
Young’s modulus: Based on variable alpha using Ic (Robertson, 2009) User defined estimation data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:14 PM 23
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Constrained
Constrained
Modulus
Modulus Shear
Shear
modulus
modulus Shear
Shear
strength
strength Undrained
Undrained
strength
strength
ratio
ratio OCR
OCR
0 0 3 .6
Su peak
Su remolded 3 .8
0 .5
4 4 4
1 1 4 .2
4 .4
1 .5
4 .6
2 2 4 .8
5 5 5
2 .5
5 .2
3 3 5 .4
5 .6
3 .5
5 .8
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 4 6 6 6
6 .2
4 .5
6 .4
5 5 6 .6
6 .8
5 .5
7 7 7
6 6 7 .2
7 .4
6 .5
7 .6
7 7 7 .8
8 8 8
7 .5
8 .2
8 8 8 .4
8 .6
8 .5
8 .8
0 5 10 0 20 40 60 0 20 40 0 1 2 3 4 0 5 10 15 20
M(C PT) (MPa) Go (MPa) Su (kPa) Su/σ',vo OC R
Calculation parameters
Constrained modulus: Based on variable alpha using Ic and Qtn (Robertson, 2009) OCR factor for clays, Nkt: 0.33
Go: Based on variable alpha using Ic (Robertson, 2009) User defined estimation data
Undrained shear strength cone factor for clays, Nkt: 14 Flat Dilatometer Test data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:14 PM 24
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Shear
Shear
Wave
Wave
velocity
velocity State
State
parameter
parameter In-situ
In-situ
stress
stress
ratio
ratio SoilSoil
sensitivity
sensitivity Effective
Effective
friction
friction
angle
angle
0 3 .6 3 .6
3 .5 5
3 .8 3 .8
0 .5
3 .6 4 4
1 4 .2 4 .2
3 .6 5
4 .4 4 .4
1 .5
3 .7 4 .6 4 .6
2 4 .8 4 .8
3 .7 5
5 5
2 .5
5 .2 5 .2
3 .8
3 5 .4 5 .4
3 .8 5 5 .6 5 .6
3 .5
5 .8 5 .8
3 .9
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 6 6
3 .9 5 6 .2 6 .2 0
4 .5
6 .4 6 .4
5 4 6 .6 6 .6
6 .8 6 .8
5 .5 4 .0 5
7 7
6 4 .1 7 .2 7 .2
7 .4 7 .4
6 .5
4 .1 5
7 .6 7 .6
7 7 .8 7 .8
4 .2
8 8
7 .5
4 .2 5 8 .2 8 .2
8 8 .4 8 .4
4 .3
8 .6 8 .6
8 .5
4 .3 5 8 .8 8 .8
50 100 150 -0 .2 -0 .1 0 0 .1 0 0 .5 1 1 .5 2 2 .5 3 0 2 4 6 8 10 20 25 30 35 40
Vs (m/s) ψ Ko St Peak φ (degrees)
Calculation parameters
Soil Sensitivity factor, NS: 7.00
User defined estimation data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:14 PM 25
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C2-2
Geotechnical Engineers Total depth: 8.90 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Bearing
Bearing
Capacity
Capacity
123
122
121
120
Ultimate Bearing Capacity (kPa) 119
118
117
116
115
114
113
112
111
110
109
108
107
Bearing Capacity calculation is
106
perfromed based on the formula:
105
Q ult R k q t q soil 104
103
where: 102
Rk: Bearing capacity factor 101
qt: Average corrected cone 100
resistance over calculation depth
qsoil: Pressure applied by soil 1 2 3 4
above footing Footing Width (m)
:: Tabular results ::
No B Start End Depth Ave. qt Rk Soil Press. Ult. bearing
(m) Depth (m) (MPa) (kPa) cap. (kPa)
(m)
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:14 PM 26
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Cone
Cone
resistance
resistance Sleeve
Sleeve
friction
friction Pore
Pore
pressure
pressure
0 0 0
0 .5 0 .5 0 .5
1 1 1
1 .5 1 .5 1 .5
2 2 2
2 .5 2 .5 2 .5
3 3 3
3 .5 3 .5 3 .5
Depth (m)
Depth (m)
Depth (m)
4 4 4
4 .5 4 .5 4 .5
5 5 5
5 .5 5 .5 5 .5
6 6 6
6 .5 6 .5 6 .5
7 7 7
7 .5 7 .5 7 .5
8 8 8
- 0 .5 0 0 .5 1 1 .5 2 2 .5 0 2 4 6 8 0 50
Tip resistance (MPa) Friction (kPa) Pressure (kPa)
The plot below presents the cross correlation coeficient between the raw qc and fs values (as measured on the field). X axes presents the lag
distance (one lag is the distance between two sucessive CPT measurements).
Cross correlation
Cross correlation
between qcbetween
& fs qc & fs
1.2
0.8
0.6
20
0.4
0.2
0
-20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20
-0.2
-0.4
-0.6
-0.8
-1
-1.2
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:15 PM 27
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
SBT - Bq plots
SBTSBT
plotplot Bq plot
Bq plot
1 ,0 0 0 1 ,0 0 0
10
10
1
-0 .6 0 - 0 .4 0 -0 .2 0 0 .0 0 0 .2 0 0 .4 0 0 .6 0 0 .8 0 1 .0 0 1 .2 0 1 .4 0
Pore pressure ratio, Bq
1
0 .1 1 10 SBT legend
Friction Ratio, Rf (%) 1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravelly sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:15 PM 28
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
SBTn
SBTn
plotplot Normalized
Normalized
Bq plot
Bq plot
1 ,0 0 0 1 ,0 0 0
100
100
10
10
1
-0 .6 0 - 0 .4 0 -0 .2 0 0 .0 0 0 .2 0 0 .4 0 0 .6 0 0 .8 0 1 .0 0 1 .2 0 1 .4 0
Pore pressure ratio, Bq
1
0 .1 1 10 SBTn legend
Normalized Friction Ratio, Fr (%)
1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravelly sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:15 PM 29
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Bq plots (Schneider)
Schneider
Schneider
et alet(2008)
al (2008)
SoilSoil
Class.
Class. Schneider
Schneider
et alet(2008)
al (2008)
SoilSoil
Class.
Class.
1 ,0 0 0 1 ,0 0 0
Essentialy Essentialy
Drained Drained
Sands Sands
ils
l So
a
o ils on
s
2 2 iti
ay
al S
s
tio n ns
Cl
ay
s i a
n Tr
Cl
Tra
I r"
ow
100 100
"L
3 ys 3
Cla
ys
I r"
an
ow
Q = qcnet/sig'v
Q = qcnet/sig'v
la
d "L
C
l ts
s an
ve
Sil t
Si
iti
1a 1a
ns
Se
ys 1b
C la
1b
1c 1c
10 10
ys
e Cla
s itiv
Sen
1 1
-2 -1 0 1 2 3 4 5 6 7 8 9 10 0 .1 1 10 100
Du2/sig'v Du2/sig'v
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:15 PM 30
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
SoilSoil
Behaviour
Behaviour
Type
Type Fuzzy
Fuzzy
Classification
Classification
0
0 .2 0 .2
0 .4 0 .4
0 .6 0 .6
0 .8 0 .8
1 1
1 .2 1 .2
1 .4 1 .4
1 .6 1 .6
1 .8 1 .8
2 2
2 .2 2 .2
2 .4 2 .4
2 .6 2 .6
2 .8 2 .8
3 3
3 .2 3 .2
3 .4 3 .4
3 .6 3 .6
3 .8 3 .8
Depth (m)
Depth (m)
4 4
4 .2 4 .2
4 .4 4 .4
4 .6 4 .6
4 .8 4 .8
5 5
5 .2 5 .2
5 .4 5 .4
5 .6 5 .6
5 .8 5 .8
6 6
6 .2 6 .2
6 .4 6 .4
6 .6 6 .6
6 .8 6 .8
7 7
7 .2 7 .2
7 .4 7 .4
7 .6 7 .6
7 .8 7 .8
8 8
8 .2 8 .2
8 .4
0 2 4 6 8 10 12 14 16 18 0 20 40 60 80 100
SBTn (Robertson 1990) Probability of Soil Types (%)
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:15 PM 31
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Cone
Cone
resistance
resistance
qt qt Friction
Friction
ratio
ratio Pore
Pore
pressure
pressure
u u SBTSBT
Index
Index SoilSoil
Behaviour
Behaviour
Type
Type
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
2 .5 2 .5 2 .5 2 .5 2 .5
3 3 3 3 3
3 .5 3 .5 3 .5 3 .5 3 .5
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 4 4 4 4
4 .5 4 .5 4 .5 4 .5 4 .5
5 5 5 5 5
5 .5 5 .5 5 .5 5 .5 5 .5
6 6 6 6 6
6 .5 6 .5 6 .5 6 .5 6 .5
Silty sand & sandy silt
1 0 0 .5 1 1 .5 0 50 1 2 3 4 0 2 4 6 8 10 12 14 16 18
Tip resistance (MPa) Rf (%) Pressure (kPa) I(SBT) SBT (Robertson, 2010)
SBT legend
1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravely sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:16 PM 32
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
cone
cone
resistance
resistance Norm.
Norm.
friction
friction
ratio
ratio Norm.
Norm.
pore
pore
pressure
pressure
ratio
ratio SBTn
SBTn
Index
Index Norm.
Norm.
SoilSoil
Behaviour
Behaviour
Type
Type
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
2 2 2 2 2
2 .5 2 .5 2 .5 2 .5 2 .5
3 3 3 3 3
3 .5 3 .5 3 .5 3 .5 3 .5
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Silty sand & sandy silt
4 4 4 4 4
4 .5 4 .5 4 .5 4 .5 4 .5
5 5 5 5 5
5 .5 5 .5 5 .5 5 .5 5 .5
6 6 6 6 6
6 .5 6 .5 6 .5 6 .5 6 .5
Silty sand & sandy silt
Silty sand & sandy silt
7 7 7 7 7
Clay & silty clay
7 .5 7 .5 7 .5 7 .5 7 .5 Sensitive fine grained
8 8 8 8 8
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:16 PM 33
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
cone
cone
resistance
resistance Norm.
Norm.
friction
friction
ratio
ratio Norm.
Norm.
pore
pore
pressure
pressure
ratio
ratio Mod.
Mod.
SBTn
SBTn
I(B)
I(B) Mod.
Mod.
Norm.
Norm.
SBTn
SBTn
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
2 2 2 2 2
2 .5 2 .5 2 .5 2 .5 2 .5
3 3 3 3 3
3 .5 3 .5 3 .5 3 .5 3 .5
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Sand-like - Contractive
4 4 4 4 4
4 .5 4 .5 4 .5 4 .5 4 .5
5 5 5 5 5
5 .5 5 .5 5 .5 5 .5 5 .5
6 6 6 6 6
6 .5 6 .5 6 .5 6 .5 6 .5
Sand-like - Contractive
Sand-like - Contractive
7 7 7 7 7 Transitional - Contractive
Clay-like - Contractive - Sensitive
7 .5 7 .5 7 .5 7 .5 7 .5
8 8 8 8 8
32 22
0 100 200 300 400 0 2 4 6 8 10 -2 0 2 4 6 8 10 100 10 0 2 4 6 8 10 12 14 16 18
Qtn Fr (%) U2 I Mod. SBTn (Robertson 2016)
B
Mod. SBTn legend
1. CCS: ClayLike - Contractive, Sensitive 4. TC: Transitional - Contractive 7. SD: Sand-like - Dilative
2. CC: Clay-like - Contractive 5. TD: Transitional - Dilative
3. CD: Clay-Like: Dilative 6. SC: Sand-like - Contractive
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:16 PM 34
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Modified
Modified
Robertson
Robertson
(2016)
(2016)
SBTn
SBTn Modified
Modified
Schneider
Schneider
et alet(2008)
al (2008)
SBTnSBTn Normalized
Normalized
Rigidity
Rigidity
Index
Index
1 ,0 0 0 1 ,0 0 0 1 ,0 0 0
SD
IB=32
Normalized Cone Resistance, Qtn
TC
TD CC
SC CCS
CD
K*
TC
(G
10 10 10
)=
K*
33
(G
0
)=
CCS CC
10
0
1 1 1
0 .1 1 10 -2 0 2 4 6 8 10 12 14 16 18 20 1 10 100 1 ,0 0 0
Normalized Friction Ratio, Fr (%) Du2/sig'v Go/qn
CCS: Clay-like - Contractive - Sensitive K(G) > 330: Soils with significant microstructure
CC: Clay-like - Contractive (e.g. age/cementation)
CD: Clay-like - Dilative
TC: Transitional - Contractive
TD: Transitional - Dilative
SC: Sand-like - Contractive
SD: Sand-like - Dilative
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:16 PM 35
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Permeability
Permeability SPTSPT
N60N60 Young's
Young's
modulus
modulus Relative
Relative
density
density Friction
Friction
angle
angle
3 .9 3 .9 3 .9
4 4 4 4
0 .5
4 .1 4 .1 4 .1
4 .2
1 4 .2 4 .2 4 .2
4 .4 4 .3 4 .3 4 .3
1 .5 4 .4 4 .4 4 .4
4 .6 4 .5 4 .5 4 .5
2 4 .6 4 .6 4 .6
4 .8 4 .7 4 .7 4 .7
2 .5 4 .8 4 .8 4 .8
5
4 .9 4 .9 4 .9
3
5 .2 5 5 5
5 .1 5 .1 5 .1
5 .4 3 .5
5 .2 5 .2 5 .2
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
5 .3 5 .3 5 .3
5 .6 4
5 .4 5 .4 5 .4
5 .8 4 .5 5 .5 5 .5 5 .5
5 .6 5 .6 5 .6
6 5 5 .7 5 .7 5 .7
5 .8 5 .8 5 .8
6 .2
5 .5 5 .9 5 .9 5 .9
6 6 6
6 .4
6 6 .1 6 .1 6 .1
6 .6 6 .2 6 .2 6 .2
6 .5 6 .3 6 .3 6 .3
6 .8 6 .4 6 .4 6 .4
7
6 .5 6 .5 6 .5
7
6 .6 6 .6 6 .6
7 .5
7 .2 6 .7 6 .7 6 .7
6 .8 6 .8 6 .8
8
7 .4 6 .9 6 .9 6 .9
-9 -6 -3 +0 0 10 20 30 40 50 0 10 0 20 40 60 80 100 30 35 40 45 50
1 x1 0 1 x1 0 1 x1 0 1 x1 0
Ksbt (m/s) N60 (blows/30cm) Es (MPa) Dr (%) φ (degrees)
Calculation parameters
Permeability: Based on SBTn Relative density constant, CDr: 350.0
SPT N60 : Based on Ic and qt Phi: Based on Kulhawy & Mayne (1990)
Young’s modulus: Based on variable alpha using Ic (Robertson, 2009) User defined estimation data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:16 PM 36
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Constrained
Constrained
Modulus
Modulus Shear
Shear
modulus
modulus Shear
Shear
strength
strength Undrained
Undrained
strength
strength
ratio
ratio OCROCR
0 0 7 7 7
Su peak
7 .0 2 Su remolded 7 .0 2 7 .0 2
0 .5
7 .0 4 7 .0 4 7 .0 4
1 1 7 .0 6 7 .0 6 7 .0 6
7 .0 8 7 .0 8 7 .0 8
1 .5
7 .1 7 .1 7 .1
2 2 7 .1 2 7 .1 2 7 .1 2
7 .1 4 7 .1 4 7 .1 4
2 .5
7 .1 6 7 .1 6 7 .1 6
3 3 7 .1 8 7 .1 8 7 .1 8
7 .2 7 .2 7 .2
3 .5
7 .2 2 7 .2 2 7 .2 2
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 4 7 .2 4 7 .2 4 7 .2 4
7 .2 6 7 .2 6 7 .2 6
4 .5
7 .2 8 7 .2 8 7 .2 8
5 5 7 .3 7 .3 7 .3
7 .3 2 7 .3 2 7 .3 2
5 .5
7 .3 4 7 .3 4 7 .3 4
6 6 7 .3 6 7 .3 6 7 .3 6
7 .3 8 7 .3 8 7 .3 8
6 .5
7 .4 7 .4 7 .4
7 7 7 .4 2 7 .4 2 7 .4 2
7 .4 4 7 .4 4 7 .4 4
7 .5
7 .4 6 7 .4 6 7 .4 6
8 8 7 .4 8 7 .4 8 7 .4 8
7 .5 7 .5 7 .5
0 10 20 0 50 100 0 20 40 0 1 2 3 4 0 5 10 15 20
M(C PT) (MPa) Go (MPa) Su (kPa) Su/σ',vo OC R
Calculation parameters
Constrained modulus: Based on variable alpha using Ic and Qtn (Robertson, 2009) OCR factor for clays, Nkt: 0.33
Go: Based on variable alpha using Ic (Robertson, 2009) User defined estimation data
Undrained shear strength cone factor for clays, Nkt: 14 Flat Dilatometer Test data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:16 PM 37
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Shear
Shear
Wave
Wave
velocity
velocity State
State
parameter
parameter In-situ
In-situ
stress
stress
ratio
ratio SoilSoil
sensitivity
sensitivity Effective
Effective
friction
friction
angle
angle
0 3 .9 7 7
4 7 .0 2 7 .0 2
0 .5
4 .1 7 .0 4 7 .0 4
4 .2
1 7 .0 6 7 .0 6
4 .3
4 .4 7 .0 8 7 .0 8
1 .5
4 .5 7 .1 7 .1
2 4 .6 7 .1 2 7 .1 2
4 .7
7 .1 4 7 .1 4
2 .5 4 .8
4 .9 7 .1 6 7 .1 6
3 5 7 .1 8 7 .1 8
5 .1 7 .2 7 .2
3 .5 5 .2
7 .2 2 7 .2 2
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
5 .3
4 7 .2 4 7 .2 4
5 .4 0
5 .5 7 .2 6 7 .2 6
4 .5
5 .6 7 .2 8 7 .2 8
5 5 .7
7 .3 7 .3
5 .8
7 .3 2 7 .3 2
5 .5 5 .9
6 7 .3 4 7 .3 4
6 6 .1 7 .3 6 7 .3 6
6 .2
7 .3 8 7 .3 8
6 .5 6 .3
7 .4 7 .4
6 .4
7 7 .4 2 7 .4 2
6 .5
6 .6 7 .4 4 7 .4 4
7 .5
6 .7 7 .4 6 7 .4 6
6 .8
8 7 .4 8 7 .4 8
6 .9
7 .5 7 .5
100 200 - 0 .2 - 0 .1 0 0 .1 0 0 .5 1 1 .5 2 2 .5 3 0 2 4 6 8 10 20 25 30 35 40
Vs (m/s) ψ Ko St Peak φ (degrees)
Calculation parameters
Soil Sensitivity factor, NS: 7.00
User defined estimation data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:16 PM 38
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C3
Geotechnical Engineers Total depth: 8.38 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Bearing
Bearing
Capacity
Capacity
200
190
180
Ultimate Bearing Capacity (kPa)
170
160
150
140
130
120
Bearing Capacity calculation is
perfromed based on the formula: 110
where: 90
Rk: Bearing capacity factor
qt: Average corrected cone 80
resistance over calculation depth
qsoil: Pressure applied by soil 1 2 3 4
above footing Footing Width (m)
:: Tabular results ::
No B Start End Depth Ave. qt Rk Soil Press. Ult. bearing
(m) Depth (m) (MPa) (kPa) cap. (kPa)
(m)
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:16 PM 39
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Cone
Cone
resistance
resistance Sleeve
Sleeve
friction
friction Pore
Pore
pressure
pressure
0 0 0
0 .5 0 .5 0 .5
1 1 1
1 .5 1 .5 1 .5
2 2 2
2 .5 2 .5 2 .5
3 3 3
3 .5 3 .5 3 .5
4 4 4
Depth (m)
Depth (m)
Depth (m)
4 .5 4 .5 4 .5
5 5 5
5 .5 5 .5 5 .5
6 6 6
6 .5 6 .5 6 .5
7 7 7
7 .5 7 .5 7 .5
8 8 8
8 .5 8 .5 8 .5
9 9 9
0 1 2 3 -5 0 5 10 15 20 25 30 0 20 40 60 80
Tip resistance (MPa) Friction (kPa) Pressure (kPa)
The plot below presents the cross correlation coeficient between the raw qc and fs values (as measured on the field). X axes presents the lag
distance (one lag is the distance between two sucessive CPT measurements).
Cross correlation
Cross correlation
between qcbetween
& fs qc & fs
1.2
0.8
0.6
0.4
0.2
20
0
-20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20
-0.2
-0.4
-0.6
-0.8
-1
-1.2
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:17 PM 40
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
SBT - Bq plots
SBTSBT
plotplot Bq plot
Bq plot
1 ,0 0 0 1 ,0 0 0
10
10
1
-0 .6 0 - 0 .4 0 -0 .2 0 0 .0 0 0 .2 0 0 .4 0 0 .6 0 0 .8 0 1 .0 0 1 .2 0 1 .4 0
Pore pressure ratio, Bq
1
0 .1 1 10 SBT legend
Friction Ratio, Rf (%) 1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravelly sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:17 PM 41
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
SBTn
SBTn
plotplot Normalized
Normalized
Bq plot
Bq plot
1 ,0 0 0 1 ,0 0 0
100
100
10
10
1
-0 .6 0 - 0 .4 0 -0 .2 0 0 .0 0 0 .2 0 0 .4 0 0 .6 0 0 .8 0 1 .0 0 1 .2 0 1 .4 0
Pore pressure ratio, Bq
1
0 .1 1 10 SBTn legend
Normalized Friction Ratio, Fr (%)
1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravelly sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:17 PM 42
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Bq plots (Schneider)
Schneider
Schneider
et alet(2008)
al (2008)
SoilSoil
Class.
Class. Schneider
Schneider
et alet(2008)
al (2008)
SoilSoil
Class.
Class.
1 ,0 0 0 1 ,0 0 0
Essentialy Essentialy
Drained Drained
Sands Sands
ils
l So
a
o ils on
s
2 2 iti
ay
al S
s
tio n ns
Cl
ay
s i a
n Tr
Cl
Tra
I r"
ow
100 100
"L
3 ys 3
Cla
ys
I r"
an
ow
Q = qcnet/sig'v
Q = qcnet/sig'v
la
d "L
C
l ts
s an
ve
Sil t
Si
iti
1a 1a
ns
Se
ys 1b
C la
1b
1c 1c
10 10
ys
e Cla
s itiv
Sen
1 1
-2 -1 0 1 2 3 4 5 6 7 8 9 10 0 .1 1 10 100
Du2/sig'v Du2/sig'v
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:17 PM 43
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
SoilSoil
Behaviour
Behaviour
Type
Type Fuzzy
Fuzzy
Classification
Classification
0
0 .5 0 .5
1 1
1 .5 1 .5
2 2
2 .5 2 .5
3 3
3 .5 3 .5
4 4
Depth (m)
Depth (m)
4 .5 4 .5
5 5
5 .5 5 .5
6 6
6 .5 6 .5
7 7
7 .5 7 .5
8 8
8 .5 8 .5
9 9
0 2 4 6 8 10 12 14 16 18 0 20 40 60 80 100
SBTn (Robertson 1990) Probability of Soil Types (%)
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:17 PM 44
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Cone
Cone
resistance
resistance
qt qt Friction
Friction
ratio
ratio Pore
Pore
pressure
pressure
u u SBTSBT
Index
Index SoilSoil
Behaviour
Behaviour
Type
Type
0 0 0 0 0
Sensitive fine grained
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
Sensitive fine grained
1 .5 1 .5 1 .5 1 .5 1 .5 Clay & silty clay
Silty sand & sandy silt
2 2 2 2 2
Silty sand & sandy silt
Silty sand & sandy silt
2 .5 2 .5 2 .5 2 .5 2 .5 Clay & silty clay
Silty sand & sandy silt
3 3 3 3 3
Clay & silty clay
4 4 4 4 4
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 .5 4 .5 4 .5 4 .5 4 .5
Clay
5 5 5 5 5
5 .5 5 .5 5 .5 5 .5 5 .5
6 .5 6 .5 6 .5 6 .5 6 .5
Silty sand & sandy silt
7 7 7 7 7
8 8 8 8 8 Clay
Clay & silty clay
Clay
8 .5 8 .5 8 .5 8 .5 8 .5
Clay & silty clay
9 9 9 9 9
0 1 2 0 1 2 3 4 5 0 50 1 2 3 4 0 2 4 6 8 10 12 14 16 18
Tip resistance (MPa) Rf (%) Pressure (kPa) I(SBT) SBT (Robertson, 2010)
SBT legend
1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravely sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:18 PM 45
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
cone
cone
resistance
resistance Norm.
Norm.
friction
friction
ratio
ratio Norm.
Norm.
pore
pore
pressure
pressure
ratio
ratio SBTn
SBTn
Index
Index Norm.
Norm.
SoilSoil
Behaviour
Behaviour
Type
Type
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
Silty sand & sandy silt
2 2 2 2 2
Sand & silty sand
Sand & silty sand
2 .5 2 .5 2 .5 2 .5 2 .5 Silty sand & sandy silt
Sand & silty sand
3 3 3 3 3 Silty sand & sandy silt
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 .5 4 .5 4 .5 4 .5 4 .5
Clay
5 5 5 5 5
5 .5 5 .5 5 .5 5 .5 5 .5
6 .5 6 .5 6 .5 6 .5 6 .5
Silty sand & sandy silt
7 7 7 7 7
8 8 8 8 8 Clay
Clay & silty clay
8 .5 8 .5 8 .5 8 .5 8 .5 Clay
Clay & silty clay
9 9 9 9 9 Clay
Clay
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:18 PM 46
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
cone
cone
resistance
resistance Norm.
Norm.
friction
friction
ratio
ratio Norm.
Norm.
pore
pore
pressure
pressure
ratio
ratio Mod.
Mod.
SBTn
SBTn
I(B)
I(B) Mod.
Mod.
Norm.
Norm.
SBTn
SBTn
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
Sand-like - Contractive
2 2 2 2 2
Sand-like - Contractive
2 .5 2 .5 2 .5 2 .5 2 .5
Sand-like - Contractive
3 3 3 3 3 Transitional - Contractive
Sand-like - Contractive
3 .5 3 .5 3 .5 3 .5 3 .5 Sand-like - Contractive
Transitional - Contractive
4 4 4 4 4 Clay-like - Dilative
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 .5 4 .5 4 .5 4 .5 4 .5 Clay-like - Contractive
5 5 5 5 5
Clay-like - Contractive - Sensitive
5 .5 5 .5 5 .5 5 .5 5 .5
6 6 6 6 6 Transitional - Contractive
Sand-like - Contractive
6 .5 6 .5 6 .5 6 .5 6 .5
Sand-like - Contractive
7 7 7 7 7
Transitional - Contractive
Clay-like - Contractive - Sensitive
7 .5 7 .5 7 .5 7 .5 7 .5
Clay-like - Contractive
8 .5 8 .5 8 .5 8 .5 8 .5
Clay-like - Contractive - Sensitive
9 9 9 9 9
32 22
0 100 200 300 400 0 2 4 6 8 10 -2 0 2 4 6 8 10 100 10 0 2 4 6 8 10 12 14 16 18
Qtn Fr (%) U2 I Mod. SBTn (Robertson 2016)
B
Mod. SBTn legend
1. CCS: ClayLike - Contractive, Sensitive 4. TC: Transitional - Contractive 7. SD: Sand-like - Dilative
2. CC: Clay-like - Contractive 5. TD: Transitional - Dilative
3. CD: Clay-Like: Dilative 6. SC: Sand-like - Contractive
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:18 PM 47
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Modified
Modified
Robertson
Robertson
(2016)
(2016)
SBTn
SBTn Modified
Modified
Schneider
Schneider
et alet(2008)
al (2008)
SBTnSBTn Normalized
Normalized
Rigidity
Rigidity
Index
Index
1 ,0 0 0 1 ,0 0 0 1 ,0 0 0
SD
IB=32
Normalized Cone Resistance, Qtn
TC
TD CC
SC CCS
CD
K*
TC
(G
10 10 10
)=
K*
33
(G
0
)=
CCS CC
10
0
1 1 1
0 .1 1 10 -2 0 2 4 6 8 10 12 14 16 18 20 1 10 100 1 ,0 0 0
Normalized Friction Ratio, Fr (%) Du2/sig'v Go/qn
CCS: Clay-like - Contractive - Sensitive K(G) > 330: Soils with significant microstructure
CC: Clay-like - Contractive (e.g. age/cementation)
CD: Clay-like - Dilative
TC: Transitional - Contractive
TD: Transitional - Dilative
SC: Sand-like - Contractive
SD: Sand-like - Dilative
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:18 PM 48
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Permeability
Permeability SPTSPT
N60N60 Young's
Young's
modulus
modulus Relative
Relative
density
density Friction
Friction
angle
angle
1 .4 1 .4 1 .4
1 .5
1 .6 1 .6 1 .6
0 .5
2 1 .8 1 .8 1 .8
1 2 2 2
2 .5 2 .2 2 .2 2 .2
1 .5
2 .4 2 .4 2 .4
3 2 2 .6 2 .6 2 .6
2 .8 2 .8 2 .8
3 .5 2 .5
3 3 3
3 3 .2 3 .2 3 .2
4
3 .4 3 .4 3 .4
3 .5
4 .5 3 .6 3 .6 3 .6
4 3 .8 3 .8 3 .8
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
5 4 4 4
4 .5
4 .2 4 .2 4 .2
5 .5 4 .4 4 .4 4 .4
5
4 .6 4 .6 4 .6
6 5 .5
4 .8 4 .8 4 .8
6 5 5 5
6 .5
5 .2 5 .2 5 .2
6 .5 5 .4 5 .4 5 .4
7
5 .6 5 .6 5 .6
7
7 .5 5 .8 5 .8 5 .8
7 .5 6 6 6
8
6 .2 6 .2 6 .2
8
6 .4 6 .4 6 .4
8 .5
8 .5 6 .6 6 .6 6 .6
6 .8 6 .8 6 .8
9 9
7 7 7
-9 -6 -3 +0 0 10 20 30 40 50 0 10 20 0 20 40 60 80 100 30 35 40 45 50
1 x1 0 1 x1 0 1 x1 0 1 x1 0
Ksbt (m/s) N60 (blows/30cm) Es (MPa) Dr (%) φ (degrees)
Calculation parameters
Permeability: Based on SBTn Relative density constant, CDr: 350.0
SPT N60 : Based on Ic and qt Phi: Based on Kulhawy & Mayne (1990)
Young’s modulus: Based on variable alpha using Ic (Robertson, 2009) User defined estimation data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:18 PM 49
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Constrained
Constrained
Modulus
Modulus Shear
Shear
modulus
modulus Shear
Shear
strength
strength Undrained
Undrained
strength
strength
ratio
ratio OCR
OCR
0 0
Su peak 3 .2
0 .5 Su remolded
3 .4
3 .6
1 1
3 .8
1 .5 4 4 4
4 .2
2 2 4 .4
4 .6
2 .5
4 .8
3 3 5 5 5
5 .2
3 .5 5 .4
5 .6
4 4
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
5 .8
6 6 6
4 .5
6 .2
5 5 6 .4
6 .6
5 .5
6 .8
7 7 7
6 6
7 .2
6 .5 7 .4
7 .6
7 7
7 .8
8 8 8
7 .5
8 .2
8 8 8 .4
8 .6
8 .5 8 .8
9 9 9
9 9
9 .2
0 20 0 50 100 150 0 50 0 1 2 3 4 0 5 10 15 20
M(C PT) (MPa) Go (MPa) Su (kPa) Su/σ',vo OC R
Calculation parameters
Constrained modulus: Based on variable alpha using Ic and Qtn (Robertson, 2009) OCR factor for clays, Nkt: 0.33
Go: Based on variable alpha using Ic (Robertson, 2009) User defined estimation data
Undrained shear strength cone factor for clays, Nkt: 14 Flat Dilatometer Test data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:19 PM 50
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Shear
Shear
Wave
Wave
velocity
velocity State
State
parameter
parameter In-situ
In-situ
stress
stress
ratio
ratio SoilSoil
sensitivity
sensitivity Effective
Effective
friction
friction
angle
angle
0 1 .4
3 .2 3 .2
1 .6
0 .5 3 .4 3 .4
1 .8
3 .6 3 .6
1 2
3 .8 3 .8
2 .2
1 .5 4 4
2 .4 4 .2 4 .2
2 2 .6 4 .4 4 .4
2 .8 4 .6 4 .6
2 .5
3 4 .8 4 .8
3 3 .2 5 5
3 .4 5 .2 5 .2
3 .5 5 .4 5 .4
3 .6
5 .6 5 .6
4 3 .8
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
5 .8 5 .8
4
6 6
4 .5
4 .2 0
6 .2 6 .2
5 4 .4 6 .4 6 .4
4 .6 6 .6 6 .6
5 .5
4 .8 6 .8 6 .8
6 5 7 7
5 .2 7 .2 7 .2
6 .5 5 .4 7 .4 7 .4
7 .6 7 .6
5 .6
7
7 .8 7 .8
5 .8
8 8
7 .5 6
8 .2 8 .2
6 .2
8 8 .4 8 .4
6 .4
8 .6 8 .6
8 .5 6 .6 8 .8 8 .8
6 .8 9 9
9
7 9 .2 9 .2
100 200 300 - 0 .2 - 0 .1 0 0 .1 0 0 .5 1 1 .5 2 2 .5 3 0 2 4 6 8 10 20 25 30 35 40
Vs (m/s) ψ Ko St Peak φ (degrees)
Calculation parameters
Soil Sensitivity factor, NS: 7.00
User defined estimation data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:19 PM 51
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C4
Geotechnical Engineers Total depth: 9.22 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Bearing
Bearing
Capacity
Capacity
285
280
275
Ultimate Bearing Capacity (kPa)
270
265
260
255
250
245
240
Bearing Capacity calculation is
perfromed based on the formula: 235
Q ult R k q t q soil 230
where: 225
Rk: Bearing capacity factor
qt: Average corrected cone 220
resistance over calculation depth
qsoil: Pressure applied by soil 1 2 3 4
above footing Footing Width (m)
:: Tabular results ::
No B Start End Depth Ave. qt Rk Soil Press. Ult. bearing
(m) Depth (m) (MPa) (kPa) cap. (kPa)
(m)
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:19 PM 52
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Cone
Cone
resistance
resistance Sleeve
Sleeve
friction
friction Pore
Pore
pressure
pressure
0 0 0
0 .5 0 .5 0 .5
1 1 1
1 .5 1 .5 1 .5
2 2 2
2 .5 2 .5 2 .5
3 3 3
3 .5 3 .5 3 .5
Depth (m)
Depth (m)
Depth (m)
4 4 4
4 .5 4 .5 4 .5
5 5 5
5 .5 5 .5 5 .5
6 6 6
6 .5 6 .5 6 .5
7 7 7
7 .5 7 .5 7 .5
8 8 8
8 .5 8 .5 8 .5
0 1 2 3 0 5 10 15 0 50 100
Tip resistance (MPa) Friction (kPa) Pressure (kPa)
The plot below presents the cross correlation coeficient between the raw qc and fs values (as measured on the field). X axes presents the lag
distance (one lag is the distance between two sucessive CPT measurements).
Cross correlation
Cross correlation
between qcbetween
& fs qc & fs
1.2
0.8
0.6
20
0.4
0.2
0
-20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20
-0.2
-0.4
-0.6
-0.8
-1
-1.2
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:19 PM 53
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
SBT - Bq plots
SBTSBT
plotplot Bq plot
Bq plot
1 ,0 0 0 1 ,0 0 0
10
10
1
-0 .6 0 - 0 .4 0 -0 .2 0 0 .0 0 0 .2 0 0 .4 0 0 .6 0 0 .8 0 1 .0 0 1 .2 0 1 .4 0
Pore pressure ratio, Bq
1
0 .1 1 10 SBT legend
Friction Ratio, Rf (%) 1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravelly sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:20 PM 54
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
SBTn
SBTn
plotplot Normalized
Normalized
Bq plot
Bq plot
1 ,0 0 0 1 ,0 0 0
100
100
10
10
1
-0 .6 0 - 0 .4 0 -0 .2 0 0 .0 0 0 .2 0 0 .4 0 0 .6 0 0 .8 0 1 .0 0 1 .2 0 1 .4 0
Pore pressure ratio, Bq
1
0 .1 1 10 SBTn legend
Normalized Friction Ratio, Fr (%)
1. Sensitive fine grained 4. Clayey silt to silty clay 7. Gravelly sand to sand
2. Organic material 5. Silty sand to sandy silt 8. Very stiff sand to clayey sand
3. Clay to silty clay 6. Clean sand to silty sand 9. Very stiff fine grained
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:20 PM 55
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Bq plots (Schneider)
Schneider
Schneider
et alet(2008)
al (2008)
SoilSoil
Class.
Class. Schneider
Schneider
et alet(2008)
al (2008)
SoilSoil
Class.
Class.
1 ,0 0 0 1 ,0 0 0
Essentialy Essentialy
Drained Drained
Sands Sands
ils
l So
a
o ils on
s
2 2 iti
ay
al S
s
tio n ns
Cl
ay
s i a
n Tr
Cl
Tra
I r"
ow
100 100
"L
3 ys 3
Cla
ys
I r"
an
ow
Q = qcnet/sig'v
Q = qcnet/sig'v
la
d "L
C
l ts
s an
ve
Sil t
Si
iti
1a 1a
ns
Se
ys 1b
C la
1b
1c 1c
10 10
ys
e Cla
s itiv
Sen
1 1
-2 -1 0 1 2 3 4 5 6 7 8 9 10 0 .1 1 10 100
Du2/sig'v Du2/sig'v
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:20 PM 56
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
SoilSoil
Behaviour
Behaviour
Type
Type Fuzzy
Fuzzy
Classification
Classification
0
0 .5 0 .5
1 1
1 .5 1 .5
2 2
2 .5 2 .5
3 3
3 .5 3 .5
Depth (m)
Depth (m)
4 4
4 .5 4 .5
5 5
5 .5 5 .5
6 6
6 .5 6 .5
7 7
7 .5 7 .5
8 8
8 .5 8 .5
0 2 4 6 8 10 12 14 16 18 0 20 40 60 80 100
SBTn (Robertson 1990) Probability of Soil Types (%)
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:20 PM 57
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Cone
Cone
resistance
resistance
qt qt Friction
Friction
ratio
ratio Pore
Pore
pressure
pressure
u u SBTSBT
Index
Index SoilSoil
Behaviour
Behaviour
Type
Type
0 0 0 0 0
1 1 1 1 1
Sensitive fine grained
1 .5 1 .5 1 .5 1 .5 1 .5
Sensitive fine grained
2 2 2 2 2
Sensitive fine grained
2 .5 2 .5 2 .5 2 .5 2 .5 Sensitive fine grained
3 3 3 3 3
3 .5 3 .5 3 .5 3 .5 3 .5
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 4 4 4 4
4 .5 4 .5 4 .5 4 .5 4 .5
5 .5 5 .5 5 .5 5 .5 5 .5
Silty sand & sandy silt
6 6 6 6 6
Sand & silty sand
6 .5 6 .5 6 .5 6 .5 6 .5
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:21 PM 58
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
cone
cone
resistance
resistance Norm.
Norm.
friction
friction
ratio
ratio Norm.
Norm.
pore
pore
pressure
pressure
ratio
ratio SBTn
SBTn
Index
Index Norm.
Norm.
SoilSoil
Behaviour
Behaviour
Type
Type
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
2 2 2 2 2
2 .5 2 .5 2 .5 2 .5 2 .5
3 3 3 3 3
3 .5 3 .5 3 .5 3 .5 3 .5
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 4 4 4 4
4 .5 4 .5 4 .5 4 .5 4 .5
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:21 PM 59
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Norm.
Norm.
cone
cone
resistance
resistance Norm.
Norm.
friction
friction
ratio
ratio Norm.
Norm.
pore
pore
pressure
pressure
ratio
ratio Mod.
Mod.
SBTn
SBTn
I(B)
I(B) Mod.
Mod.
Norm.
Norm.
SBTn
SBTn
0 0 0 0 0
0 .5 0 .5 0 .5 0 .5 0 .5
1 1 1 1 1
1 .5 1 .5 1 .5 1 .5 1 .5
2 2 2 2 2
2 .5 2 .5 2 .5 2 .5 2 .5
3 3 3 3 3
3 .5 3 .5 3 .5 3 .5 3 .5
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 4 4 4 4
4 .5 4 .5 4 .5 4 .5 4 .5
Sand-like - Contractive
5 5 5 5 5
Sand-like - Contractive
5 .5 5 .5 5 .5 5 .5 5 .5 Sand-like - Contractive
6 6 6 6 6
6 .5 6 .5 6 .5 6 .5 6 .5 Sand-like - Contractive
7 7 7 7 7
7 .5 7 .5 7 .5 7 .5 7 .5 Transitional - Contractive
Sand-like - Contractive
Clay-like - Contractive
8 8 8 8 8
Clay-like - Contractive - Sensitive
8 .5 8 .5 8 .5 8 .5 8 .5
32 22
0 100 200 300 400 0 2 4 6 8 10 -2 0 2 4 6 8 10 100 10 0 2 4 6 8 10 12 14 16 18
Qtn Fr (%) U2 I Mod. SBTn (Robertson 2016)
B
Mod. SBTn legend
1. CCS: ClayLike - Contractive, Sensitive 4. TC: Transitional - Contractive 7. SD: Sand-like - Dilative
2. CC: Clay-like - Contractive 5. TD: Transitional - Dilative
3. CD: Clay-Like: Dilative 6. SC: Sand-like - Contractive
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:21 PM 60
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Modified
Modified
Robertson
Robertson
(2016)
(2016)
SBTn
SBTn Modified
Modified
Schneider
Schneider
et alet(2008)
al (2008)
SBTnSBTn Normalized
Normalized
Rigidity
Rigidity
Index
Index
1 ,0 0 0 1 ,0 0 0 1 ,0 0 0
SD
IB=32
Normalized Cone Resistance, Qtn
TC
TD CC
SC CCS
CD
K*
TC
(G
10 10 10
)=
K*
33
(G
0
)=
CCS CC
10
0
1 1 1
0 .1 1 10 -2 0 2 4 6 8 10 12 14 16 18 20 1 10 100 1 ,0 0 0
Normalized Friction Ratio, Fr (%) Du2/sig'v Go/qn
CCS: Clay-like - Contractive - Sensitive K(G) > 330: Soils with significant microstructure
CC: Clay-like - Contractive (e.g. age/cementation)
CD: Clay-like - Dilative
TC: Transitional - Contractive
TD: Transitional - Dilative
SC: Sand-like - Contractive
SD: Sand-like - Dilative
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:21 PM 61
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Permeability
Permeability SPTSPT
N60N60 Young's
Young's
modulus
modulus Relative
Relative
density
density Friction
Friction
angle
angle
4 .8 4 .8 4 .8 4 .8
1 .5
4 .9 4 .9 4 .9
5
5 5 5
2
5 .2 5 .1 5 .1 5 .1
5 .2 5 .2 5 .2
5 .4 2 .5
5 .3 5 .3 5 .3
5 .6 5 .4 5 .4 5 .4
3
5 .5 5 .5 5 .5
5 .8 5 .6 5 .6 5 .6
3 .5
6 5 .7 5 .7 5 .7
5 .8 5 .8 5 .8
6 .2 4
5 .9 5 .9 5 .9
6 6 6
6 .4
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 .5 6 .1 6 .1 6 .1
6 .6 6 .2 6 .2 6 .2
5 6 .3 6 .3 6 .3
6 .8
6 .4 6 .4 6 .4
5 .5 6 .5 6 .5 6 .5
7
6 .6 6 .6 6 .6
7 .2 6 6 .7 6 .7 6 .7
7 .4 6 .8 6 .8 6 .8
6 .5 6 .9 6 .9 6 .9
7 .6 7 7 7
7 7 .1 7 .1 7 .1
7 .8
7 .2 7 .2 7 .2
8 7 .5 7 .3 7 .3 7 .3
7 .4 7 .4 7 .4
8 .2
8 7 .5 7 .5 7 .5
8 .4 7 .6 7 .6 7 .6
8 .5 7 .7 7 .7 7 .7
-9 -6 -3 +0 0 10 20 30 40 50 0 10 20 0 20 40 60 80 100 30 35 40 45 50
1 x1 0 1 x1 0 1 x1 0 1 x1 0
Ksbt (m/s) N60 (blows/30cm) Es (MPa) Dr (%) φ (degrees)
Calculation parameters
Permeability: Based on SBTn Relative density constant, CDr: 350.0
SPT N60 : Based on Ic and qt Phi: Based on Kulhawy & Mayne (1990)
Young’s modulus: Based on variable alpha using Ic (Robertson, 2009) User defined estimation data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:21 PM 62
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Constrained
Constrained
Modulus
Modulus Shear
Shear
modulus
modulus Shear
Shear
strength
strength Undrained
Undrained
strength
strength
ratio
ratio OCR
OCR
0 0
Su peak 7 .4 5
Su remolded
0 .5
7 .5
1 1 7 .5 5
7 .6
1 .5
7 .6 5
2 2
7 .7
2 .5 7 .7 5
7 .8
3 3
7 .8 5
3 .5
7 .9
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
4 4 7 .9 5
4 .5 8 8 8
8 .0 5
5 5
8 .1
5 .5 8 .1 5
6 6 8 .2
8 .2 5
6 .5
8 .3
7 7 8 .3 5
7 .5 8 .4
8 .4 5
8 8
8 .5
8 .5
0 10 20 30 0 50 0 50 0 1 2 3 4 0 5 10 15 20
M(C PT) (MPa) Go (MPa) Su (kPa) Su/σ',vo OC R
Calculation parameters
Constrained modulus: Based on variable alpha using Ic and Qtn (Robertson, 2009) OCR factor for clays, Nkt: 0.33
Go: Based on variable alpha using Ic (Robertson, 2009) User defined estimation data
Undrained shear strength cone factor for clays, Nkt: 14 Flat Dilatometer Test data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:21 PM 63
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Shear
Shear
Wave
Wave
velocity
velocity State
State
parameter
parameter In-situ
In-situ
stress
stress
ratio
ratio SoilSoil
sensitivity
sensitivity Effective
Effective
friction
friction
angle
angle
0
4 .8 7 .4 5 7 .4 5
0 .5 4 .9
7 .5 7 .5
5
1 5 .1 7 .5 5 7 .5 5
5 .2 7 .6 7 .6
1 .5
5 .3
7 .6 5 7 .6 5
5 .4
2
5 .5 7 .7 7 .7
2 .5 5 .6 7 .7 5 7 .7 5
5 .7
7 .8 7 .8
3 5 .8
5 .9 7 .8 5 7 .8 5
3 .5
6 7 .9 7 .9
Depth (m)
Depth (m)
Depth (m)
Depth (m)
Depth (m)
6 .1
4 7 .9 5 7 .9 5
6 .2 0
4 .5 6 .3 8 8
6 .4 8 .0 5 8 .0 5
5 6 .5
8 .1 8 .1
6 .6
5 .5 8 .1 5 8 .1 5
6 .7
6 .8 8 .2 8 .2
6
6 .9
8 .2 5 8 .2 5
6 .5 7
7 .1 8 .3 8 .3
7 7 .2 8 .3 5 8 .3 5
7 .3
7 .5 8 .4 8 .4
7 .4
7 .5 8 .4 5 8 .4 5
8
7 .6 8 .5 8 .5
8 .5 7 .7
100 200 - 0 .2 - 0 .1 0 0 .1 0 0 .5 1 1 .5 2 2 .5 3 0 2 4 6 8 10 20 25 30 35 40
Vs (m/s) ψ Ko St Peak φ (degrees)
Calculation parameters
Soil Sensitivity factor, NS: 7.00
User defined estimation data
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:21 PM 64
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
GeoLogismiki CPT: C5
Geotechnical Engineers Total depth: 8.54 m, Date: 6/6/2021
Merarhias 56 Surface Elevation: 0.00 m
http://www.geologismiki.gr
Coords: X:0.00, Y:0.00
Project: Cone Type:
Location: Cone Operator:
Bearing
Bearing
Capacity
Capacity
320
310
300
290
Ultimate Bearing Capacity (kPa)
280
270
260
250
240
230
220
Bearing Capacity calculation is
perfromed based on the formula: 210
200
Q ult R k q t q soil
190
where:
Rk: Bearing capacity factor 180
qt: Average corrected cone
170
resistance over calculation depth
qsoil: Pressure applied by soil 1 2 3 4
above footing Footing Width (m)
:: Tabular results ::
No B Start End Depth Ave. qt Rk Soil Press. Ult. bearing
(m) Depth (m) (MPa) (kPa) cap. (kPa)
(m)
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:21 PM 65
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt
This software is licensed to: Loi Doan Huy
Presented below is a list of formulas used for the estimation of various soil properties. The formulas are presented in SI unit system and assume
that all components are expressed in the same units.
I c 4.00 and I c 3.27 then k 10 -4.52-1.37Ic :: Undrained peak shear strength, Su (kPa) ::
If Ic > 2.20
α = 14 for Qtn > 14 :: Peak Friction Angle, φ' (°) ::
α = Qtn for Qtn ≤ 14
MCPT = α·(qt − σv) φ ' 29.5 B 0.121
q 0.256 0.336 B q logQ t
(applicable for 0.10<Bq<1.00)
If Ic ≥ 2.20
MCPT =0.03 (qt σ v ) 10 0.55Ic +1.68
References
• Robertson, P.K., Cabal K.L., Guide to Cone Penetration Testing for Geotechnical Engineering, Gregg Drilling & Testing, Inc., 5th Edition, November
2012
• Robertson, P.K., Interpretation of Cone Penetration Tests - a unified approach., Can. Geotech. J. 46(11): 1337–1355 (2009)
• N Barounis, J Philpot, Estimation of in-situ water content, void ratio, dry unit weight and porosity using CPT for saturated sands, Proc. 20th NZGS
Geotechnical Symposium
CPeT-IT v.3.5.4.9 - CPTU data presentation & interpretation software - Report created on: 6/6/2021, 4:28:21 PM 66
Project file: D:\Vinh Phuc\So Lieu Goc\Xuyen Vinh Phu - File Goc.cpt