Professional Documents
Culture Documents
Cone To Cone Type Rewind Magazine Type
Cone To Cone Type Rewind Magazine Type
R e w ind Ma g az ine ty p e
We reserve our right to modify them at any time, to be confirmed by authorized specification.
CAT. NO. 21P8X2 21-04-2 (C-TU) May. 2021
Drum Traverse Type Arm Traverse Type
Muratec’s Multi-grooved Drum has a control system that switches the drum groove to the diameter at Motor for package drive
which patterning (ribbon) occurs and produce the quality package to facilitates the unwinding.
Suitable for
middle-fine count yarn
Type A
Drum interchange 2W 2.5W
unnecessary regardless of
Suitable for yarn type or yarn count.
Coarse-middle
count yarn
Type B (option) 1.5W 2W Synchronization
Type D (option) For winding of finer count yarn than Ne60, we recommend Type D. Traverse
Jumping mechanism
PAC21, the drum wind controller is used to form a package suitable for high-speed unwinding.
This is achieved by switching the number of winds before and after this particular package diameter
(excluding Type-B).
Ribbon
Winding on 2.5W base Carded Cotton Ne40 Stable and high-speed unwinding Larger packages are available with super fine count
m/min.
Unwinding tension [Cotton Ne80/1300mpm]
cN cN
40 40
Create yarn Conventional Drum (Pac-D)
FPRO EX
Sloughing breaks 30
1,300 30
Number of winds
20 20
10 10
1,000 0
230 190 150(mm)
0
230 190 150(mm)
Latching
Package diameter Package diameter
package weight than conventional drum winder, Flexible combination of package density and traverse width can correct bulge shape package.
0.430
allowing for good dyeing performance. 0.420
0.410
0.400
0.390
FPRO EX (1300m/min) 0.380
Conventional Drum Winder (1100m/min) 0 200 400 600 800 1000 1200
Package weight (g)
3 4
Arm
Traverse Precise Winding
Shorter distance from Features of each winding method
traverse guide to package
FPRO EX was designed to have shorter length from traverse Step Precision Winding Decrease the number of winds and jump
guide to package at any position. (+) Package density is uniform and no ribbon the ribbons.→NO RIBBONS!
initiates. The number of winds decrease step
α1 α’1 α2 α’2
Hook-shaped Traverse Guide α’1
α’2
The hook-shaped traverse guide supports stable α1
Traverse angle α2
winding.
Traverse angle
(Traverse angle of Drum winding)
Package diameter
(※) Number of winds which create ribbon
Traverse angle
α α
Package diameter
Yarn traverse is always checked and a unit is stopped if (-) Package density is not uniform because the Big ribbon
(※)
any irregular traverse occurs to avoid yarn lapping or traverse angle gets smaller aspackage gets
β
defective packages. larger.
Traverse angle
α β
α>β Package diameter
5 6
3 Types of Cone to Cone
1 Package
Model-Ⅰ 〇 〇 〇 〇 ● ● ●
Manual feed
Model-Ⅱ 2 Packages
〇 〇 〇 〇 ● ● 〇
Automatic feed
Model-SR 1 Package
Manual feed
× 〇 × × 〇 ● ●
※Hand splicer
shall be arranged
by customer
〇:With (Standard) ●:Option ×:Without
Outer Layer Sensor / Inner Layer Sensor Pakage Shutter & Conveyor Tower Lamp
Optimized unwinding speed available. New package shutter performs two-stage transfer to LEDs in 3 colors - red, yellow and green
Thanks to outer & inner layer sensor, yarn breakage can be minimized. absorb impact when a wound package is transferred indicate machine status.
Low-speed winding
to the conveyor. This makes it easy to understand the machine
High-speed winding
status even from a distance and contributes to
improve operator efficiency as well as to
reduce machine downtime.
100 200mm
100∼200mm
7 8
Drum
Traverse Rewind Magazine Dimensions of Machine
For Residual Yarn Cone to Cone
(1075*) 751
367 733
835
An intelligent automatic winder for re-winding of the residual yarns
L-H
3200 (3250*)
2550 (2600*)
*ModelⅡ 2000 L1
733 367 TL
1060 1025(1255*)
60SP 60SP
10SP 12SP 20SP 24SP 30SP 36SP 40SP 48SP 50SP (5-span) (6-span) 72SP 84SP★ 96SP★
TL 5270 5910 8540 9820 11810 13730 15080 17640 18350 21550 21620 25460 29370 33280
L1 3270 3910 6540 7820 9810 11730 13080 15640 16350 19550 19620 23460 27370 31280
★Model-SR only
Rewind Magazine
751
367 733
1075
L-H
3200
2550
2000 L1
733 367 TL
1060 1105
1500
2000
L-h
*3200
2000
R-h
2200
L-h
1800
With front suction type of blow cleaner (option) : 3500
9 10