Professional Documents
Culture Documents
SANS 57 SABS ISO 679 1989 1.00 ST Methods of testing cements - Determination of strength ISO 679:1989 IDT
SANS 201 SABS SM 829 2002 2.01 ST Sieve analysis, fines content and dust content of
aggregates
SANS 274 2004 1.00 ST Quality management systems - Guidelines for quality ISO 10006:2003 IDT
management in projects
SANS 282 SABS 82 2004 5.01 ST Bending dimensions and scheduling of steel
reinforcement for concrete
*1.
SANS 1083 SABS 1083 2002 2.01 ST Aggregates from natural sources - Aggregates for
concrete
SANS 1090 SABS 1090 2002 2.01 ST Aggregates from natural sources - Fine aggregates for
plaster and mortar
SANS 1200 G SABS 1200 G 1982 1.00 ST Standardized specification for civil engineering
construction Section G: Concrete (structural)
SANS 1200 GA SABS 1200 GA 1982 2.00 ST Standardized specification for civil engineering
construction Section GA: Concrete (small works)
SANS 1200 GE SABS 1200 GE 1984 1.00 ST Standardized specification for civil engineering
construction Section GE: Precast concrete (structural)
SANS 1200 GF SABS 1200 GF 1984 1.00 ST Standardized specification for civil engineering
construction Section GF: Prestressed concrete
SANS 1491-1 SABS 1491-1 2005 2.00 ST Portland cement extenders Part 1: Ground granulated
blast-furnace slag
*1. See last page for SANS 1058 which has been added to the collection
Status: DC-Draft for comment, MS-Miscellaneous set, NP-New work item, PC-Project cancelled, PR-Approved project, RG-Regulation,
ST-Standard, WD-Withdrawn
View next page
Report Date 2005-11-14 Page - 2
SELECTIVE LIST
Title of report :
SANS 1491-2 SABS 1491-2 2005 2.00 ST Portland cement extenders Part 2: Fly ash
SANS 1491-3 SABS 1491-3 2005 2.00 ST Portland cement extenders Part 3: Silica fume
SANS 1534 SABS 1534 2004 1.04 ST Resin capsules for use with tendon based support
systems
SANS 1589 SABS 1589 1994 1.00 ST The braking performance of trackless underground mining
vehicles - Load haul dumpers and dump trucks
SANS 1745 SABS 1745 2003 1.01 ST Cementitious grouting capsules for use with tendon-based
support systems
SANS 5551 SABS SM 551 1981 1.00 ST Sodium and potassium contents of portland cement (by
atomic absorption of flame emission)
SANS 5742 SABS SM 742 1971 1.00 ST Sulphide sulphur content of cement
SANS 5744 SABS SM 744 1971 1.00 ST Insoluble residue content of cement
SANS 5746 SABS SM 746 1971 1.00 ST Coarse particles content of cement
SANS 5749 SABS SM 749 1971 1.00 ST Compressive strength of cement mortar cubes
SANS 5751 SABS SM 751 1988 2.00 ST Standard consistency of cement paste
Status: DC-Draft for comment, MS-Miscellaneous set, NP-New work item, PC-Project cancelled, PR-Approved project, RG-Regulation,
View
ST-Standard, next page
WD-Withdrawn
Report Date 2005-11-14 Page - 3
SELECTIVE LIST
Title of report :
SANS 5755 SABS SM 755 1971 1.00 ST Air content of cement mortar
SANS 5832 SABS SM 832 1976 1.00 ST Organic impurities in fine aggregates (limit test)
SANS 5833 SABS SM 833 1994 2.00 ST Detection of sugar in fine aggregates
SANS 5834 SABS SM 834 1994 2.00 ST Soluble deleterious impurities in fine aggregates (limit
test)
SANS 5835 SABS SM 835 1994 2.00 ST Estimation of the effect of fine aggregate on the water
requirement of concrete
SANS 5836 SABS SM 836 2002 2.01 ST Effect of fine and coarse aggregate on the shrinkage and
expansion of cement: aggregate mixes (mortar prism
method)
SANS 5837 SABS SM 837 2002 2.01 ST Low density materials content of aggregates
SANS 5838 SABS SM 838 1976 1.00 ST Sand equivalent value of fine aggregates
SANS 5839 SABS SM 839 2002 2.01 ST Soundness of aggregates (magnesium sulfate method)
SANS 5840 SABS SM 840 2002 2.01 ST Shell content of fine aggregate
SANS 5841 SABS SM 841 1994 2.00 ST Aggregate crushing value of coarse aggregates
SANS 5842 SABS SM 842 1994 2.00 ST FACT value (10% fines aggregate crushing value) of
coarse aggregates
SANS 5844 SABS SM 844 1994 2.00 ST Particle and relative densities of aggregates
SANS 5845 SABS SM 845 1994 2.00 ST Bulk densities and voids content of aggregates
SANS 5846 SABS SM 846 1976 1.00 ST Abrasion resistance of coarse aggregates (Los Angeles
machine method)
SANS 5847 SABS SM 847 2002 2.01 ST Flakiness index of coarse aggregates
SANS 5849 SABS SM 849 2002 2.01 ST Total water-soluble salts content of fines in aggregates
SANS 5850-1 SABS SM 850-1 1998 2.00 ST Sulfates content of fines in aggregates Part 1: Water-
soluble sulfates in fines in aggregates
SANS 5850-2 SABS SM 850-2 2002 1.02 ST Sulfates content of fines in aggregates Part 2: Acid-
soluble sulfates in fines in aggregates
SANS 5851 SABS SM 851 2002 1.01 ST Liquid limit of fines in aggregates for base-courses
SANS 5852 SABS SM 852 1976 1.00 ST Plastic limit and plasticity index of fines in aggregates for
base-courses
SANS 5853 SABS SM 853 1976 1.00 ST Linear shrinkage of fines in aggregates for base-courses
SANS 5854 SABS SM 854 1976 1.00 ST pH Value of fines in aggregates for base-courses
SANS 5855 SABS SM 855 1976 1.00 ST Free water content of aggregates
Status: DC-Draft for comment, MS-Miscellaneous set, NP-New work item, PC-Project cancelled, PR-Approved project, RG-Regulation,
ST-Standard,View next page
WD-Withdrawn
Report Date 2005-11-14 Page - 5
SELECTIVE LIST
Title of report :
SANS 5860 SABS SM 860 1994 1.00 ST Concrete tests - Dimensions, tolerances and uses of cast
test specimens
SANS 5861-1 SABS SM 861-1 1994 2.00 ST Concrete tests - Mixing fresh concrete in the laboratory
SANS 5861-2 SABS SM 861-2 1994 2.00 ST Concrete tests - Sampling of freshly mixed concrete
SANS 5861-3 SABS SM 861-3 1994 2.00 ST Concrete tests - Making and curing of test specimens
SANS 5863 SABS SM 863 1994 2.00 ST Concrete tests - Compressive strength of hardened
concrete
SANS 5864 SABS SM 864 1994 2.00 ST Concrete tests - Flexural strength of hardened concrete
SANS 5865 SABS SM 865 1994 2.00 ST Concrete tests - The drilling, preparation, and testing for
compressive strength of cores taken from hardened
concrete
SANS 5900 SABS SM 900 1983 2.00 ST Warpage and squareness of refractory bricks
SANS 5901 SABS SM 901 1978 1.00 ST True relative density of refractory materials (Pycnometer
method)
SANS 5910 SABS SM 910 1979 1.00 ST Creep of refractory bricks in compression
SANS 5919 SABS SM 919 1980 1.00 ST Modulus of rupture at elevated temperatures of dense
refractory bricks
Status: DC-Draft for comment, MS-Miscellaneous set, NP-New work item, PC-Project cancelled, PR-Approved project, RG-Regulation,
ST-Standard, WD-Withdrawn
Report Date 2005-11-14 Page - 6
SELECTIVE LIST
Title of report :
SANS 6085 SABS SM 1085 2001 2.01 ST Concrete tests - Initial drying shrinkage and wetting
expansion of concrete
SANS 6150 SABS SM 1150 1989 1.00 ST Verification of compression testing machines for concrete:
Calibration of load scale
SANS 6151 SABS SM 1151 1989 1.00 ST Free water content of portland cement extenders
SANS 6152 SABS SM 1152 1989 1.00 ST Available alkali content of portland cement extenders
SANS 6153 SABS SM 1153 1989 1.00 ST Reactivity with lime of portland cement extenders
SANS 6155 SABS SM 1155 2002 1.01 ST Effect of portland cement extenders on the reduction of
alkali-silica reaction (Accelerated mortar prism method)
SANS 6156 SABS SM 1156 1989 1.00 ST Water requirement of portland cement extenders
SANS 6157 SABS SM 1157 2002 1.01 ST Fineness of cement and portland cement extenders (45
µm sieve method)
SANS 6239 SABS SM 1239 2002 1.01 ST Aggregate impact value of coarse aggregate
SANS 6240 SABS SM 1240 2002 1.01 ST Electric conductivity of fine aggregate
SANS 6241 SABS SM 1241 1994 1.00 ST Particle size distribution of material of diameter smaller
than 75 µm in fine aggregate (Hydrometer method)
SANS 6243 SABS SM 1243 2002 1.01 ST Deleterious clay content of the fines in aggregate
(methylene blue adsorption indicator test)
Status: DC-Draft for comment, MS-Miscellaneous set, NP-New work item, PC-Project cancelled, PR-Approved project, RG-Regulation,
ST-Standard, WD-Withdrawn
Report Date 2005-11-14 Page - 7
SELECTIVE LIST
Title of report :
SANS 6244 SABS SM 1244 1994 1.00 ST Particles of diameter not exceeding 20 µm and not
exceeding 5 µm and smaller, respectively, in fine
aggregate (pipette method)
SANS 6245 SABS SM 1245 2002 1.01 ST Potential reactivity of aggregates with alkalis (accelerated
mortar prism method)
SANS 6246 SABS SM 1246 2002 1.01 ST Treton impact value of aggregates
SANS 6250 SABS SM 1250 1994 1.00 ST Concrete tests - Density of compacted freshly mixed
concrete
SANS 6251 SABS SM 1251 1994 1.00 ST Concrete tests - Density of hardened concrete
SANS 6252 SABS SM 1252 1994 1.00 ST Concrete tests - Air content of freshly mixed concrete -
Pressure method
SANS 6253 SABS SM 1253 1994 1.00 ST Concrete tests - Tensile splitting strength of concrete
SANS 6254 SABS SM 1254 1994 1.00 ST Mortar tests - Initial drying shrinkage and wetting
expansion of mortar
SANS 6255 SABS SM 1255 1994 1.00 ST Mortar tests - Compressive strength of mortar
SANS 10100-1 SABS 0100-1 2000 2.02 ST The structural use of concrete Part 1: Design
SANS 10100-2 SABS 0100-2 1992 2.00 ST The structural use of concrete Part 2: Materials and
execution of work
SANS 10120-2 G SABS 0120-2 G 1982 2.00 ST Code of practice for use with standardized specifications
for civil engineering construction and contract documents
Part 2: Project specification Section G: Concrete
(structural)
SANS 10120-2 SABS 0120-2 GA 1982 2.00 ST Code of practice for use with standardized specifications
GA for civil engineering construction and contract documents
Part 2: Project specification Section GA: Concrete (small
works)
Viewfornext
Status: DC-Draft page
comment, MS-Miscellaneous set, NP-New work item, PC-Project cancelled, PR-Approved project, RG-Regulation,
ST-Standard, WD-Withdrawn
Report Date 2005-11-14 Page - 8
SELECTIVE LIST
Title of report :
SANS 10120-2 SABS 0120-2 GB 1984 1.00 ST Code of practice for use with standardized specifications
GB for civil engineering construction and contract documents
Part 2: Project specification Section GB: Concrete
(ordinary buildings)
SANS 10120-2 SABS 0120-2 GE 1984 1.00 ST Code of practice for use with standardized specifications
GE for civil engineering construction and contract documents
Part 2: Project specification Section GE: Precast concrete
(structural)
SANS 10120-2 GF SABS 0120-2 GF 1984 1.00 ST Code of practice for use with standardized specifications
for civil engineering construction and contract documents
Part 2: Project specification Section GF: Prestressed
concrete
SANS 10120-3 GF SABS 0120-3 GF 1984 1.00 ST Code of practice for use with standardized specifications
for civil engineering construction and contract documents
Part 3: Guidance for design Section GF: Prestressed
concrete
SANS 10120-4 GF SABS 0120-4 GF 1984 1.00 ST Code of practice for use with standardized specifications
for civil engineering construction and contract documents
Part 4: Typical schedule of quantities Section GF:
Prestressed concrete
SANS 10120-5 GF SABS 0120-5 GF 1984 1.00 ST Code of practice for use with standardized specifications
for civil engineering construction and contract documents
Part 5: Contract administration Section GF: Prestressed
concrete
SANS 50196-1 SABS EN 196-1 1994 1.00 ST Methods of testing cement Part 1: Determination of EN 196-1:1994 MOD
strength
SANS 50196-2 SABS EN 196-2 1994 1.00 ST Methods of testing cement Part 2: Chemical analysis of EN 196-2:1994 MOD
cement
SANS 50196-3 SABS EN 196-3 1994 1.00 ST Methods of testing cement Part 3: Determination of setting EN 196-3:1994 MOD
time and soundness
SANS 50196-4 SABS ENV 196-4 1993 1.00 ST Methods of testing cement Part 4: Quantitative ENV 196-4:1993 MOD
determination of constituents
SANS 50196-5 SABS EN 196-5 1994 1.00 ST Methods of testing cement Part 5: Pozzolanicity test for EN 196-5:1994 MOD
pozzolanic cement
Status: DC-Draft for comment, MS-Miscellaneous set, NP-New work item, PC-Project cancelled, PR-Approved project, RG-Regulation,
ST-Standard, WD-Withdrawn
Report Date 2005-11-14 Page - 9
SELECTIVE LIST
Title of report :
SANS 50196-6 SABS EN 196-6 1989 1.00 ST Methods of testing cement Part 6: Determination of EN 196-6:1989 MOD
fineness
SANS 50196-7 SABS EN 196-7 1989 1.00 ST Methods of testing cement Part 7: Methods of taking and EN 196-7:1989 MOD
preparing samples of cement
SANS 50196-21 SABS EN 196-21 1989 1.00 ST Methods of testing cement Part 21: Determination of the EN 196-21:1989 MOD
chloride, carbon dioxide and alkali content of cement
SANS 50197-1 SABS EN 197-1 2000 1.00 ST Cement Part 1: Composition, specifications and EN 197-1:2000 IDT
conformity criteria for common cements
SANS 50197-2 SABS EN 197-2 2000 1.00 ST Cement Part 2: Conformity evaluation EN 197-2:2000 IDT
SANS 50413-1 2004 2.00 ST Masonry cement Part 1: Composition, specifications and EN 413-1:2004 IDT
conformity criteria
SANS 50413-2 SABS EN 413-2 1994 1.00 ST Masonry cement Part 2: Test methods EN 413-2:1994 MOD
M 33 A M 33 A 1992 2.00 ST The international metric system (SI). Guide to the use of
the SI in South Africa
Status: DC-Draft for comment, MS-Miscellaneous set, NP-New work item, PC-Project cancelled, PR-Approved project, RG-Regulation,
ST-Standard, WD-Withdrawn
SANS number SABS number Year Ed Title