SPEC Description Test Items Unit (STD Boom Tolerance Remark P-Mode)
Engine No Load High Standard rpm 1,850 ±50
Speed Power rpm 1,950 ±50 Low idle rpm 800 ±50 AUTO IDLE rpm 1,000 ±50 Load Standard rpm 1,816 over 1 Pump Relief Power rpm 1,902 over Standard rpm 1,816 over 2 Pump Relief Power rpm 1,902 over 2 Main Kgf/cm 330 0 ∼ +10 Pressure PUMP 2 Setting Up Pressure Kgf/cm 350 0 ∼ +10 2 SWING @ Motor Kgf/cm 245 0 ∼ +10 Standard sec - - UP Power sec - - Arti BOOM Standard sec - - DOWN Power sec - - Standard sec 3.2 ±0.4 UP Power sec 2.9 ±0.4 BOOM Standard sec 2.7 ±0.3 DOWN Front Power sec 2.6 ±0.3 Speed Standard sec 2.9 ±0.4 CROWD Power sec 2.8 ±0.4 ARM Standard sec 2.3 ±0.3 DUMP Power sec 2.1 ±0.3 Standard sec 4 ±0.4 CROWD Power sec 3.7 ±0.4 BKT Standard sec 2.2 ±0.3 DUMP Power sec 2.1 ±0.3 Swing Speed Swing 3 turns sec 16.8 ±1.5 Standard sec 25 ±1.5 Low On Ground Power sec 24 ±1.5 (20m) Standard sec 16 ±1.5 High Travel Power sec 15.3 ±1.5 Speed Standard sec 29.78 ±2.0 Low JACK UP Power sec 28.35 ±2.0 (3turns) Standard sec 19 ±2.0 High Power sec 18 ±2.0 Swing Coasting Swing BRG After 360° swing mm 600(57°) ±255 (±20°) Boom mm/5min 20 within Cylinder Creep Front Arm mm/5min 20 within Bucket mm/5min 20 within Travel Low speed mm 150 below 20m Travel Deviation High Speed mm 150 below