Professional Documents
Culture Documents
Make sure your hoses are clean before connecting them to the hydraulic motor. Make sure your machine
has clean oil inside of the hydraulic system. Operate the reduction gear drive idle for about 5 minutes
(machine lifted), with low load and in one direction. In order to ensure a good cleaning of the system and a
perfect filling.
The hose for the drain port and the hose for the 2-speed control port look similar. With a result that the two hoses are easily
interchanged. If connected incorrectly it will result in direct damage to the final drive. The next test is therefore useful;
Data
Drive unit 6-8 ton
Circuit Open System
Weight 87 kg
Transmission oil type 80W90
Capacity 1,2 Litre
Maintenance
Check the oil before first use
Check the oil every month
Change the oil every 250 driving hours or 1x a year