Professional Documents
Culture Documents
Activity No 1 - Lab 1
Activity No 1 - Lab 1
Procedure:
1. Cut 4pcs. (1x1 inch) PCB.
2. Place the PCB in a different container.
3. Apply the surface level Ferric Chloride solution.
4. Fill out the Table 1-1.
5. Prepare 2 set of 2x2 PCB.
6. Wrap a 1 2x2 PCB using a masking tape.
7. Write “AMA Computer College - Engineering” at the top of covered copper portion.
8. Use a cutting device to engrave the words.
9. Remove all excess masking tape at the PCB.
10. Using the permanent market write the word “AMA Computer College - Engineering”.
11. Place the each PCB inside the container with copper laid up and copper lay down position.
12. Apply the best technique in Table 1-1.
13. Fill-out Table 1-2.