Professional Documents
Culture Documents
CLO3: Apply (Laplace and Fourier) transform methods on continuous time signals and systems.
(Cognitive Level: C3)
Total Marks: 60
Instructions:
* Each student must individually attempt this assignment.
* Copying someone's else solution or providing your solution to someone else, will simply lead to
zero marks for both
* Solution must be submitted through “Assignment” option on the Slate in the form of a scanned
pdf (of your handwritten solution) with the file name as roll no._Section, e.g., 19I-0123_Section
A. We will create an Assignment entry related to this assignment on the Slate
Q1:
Compute inverse Fourier transform of the following:
(3 × 3 = 9 Marks)
I II
III
Q2: Compute Fourier transform and plot magnitude spectrum of the following signal [6 Marks]
t
𝑥(𝑡) = 2sinc 2 ( ) cos(20𝜋𝑡) + cos(8𝜋𝑡)
2π
Q3 A continuous time periodic signal 𝑥(𝑡) with fundamental frequency 𝜔0 = 100rad/sec has the
following Fourier series coefficients. [2 + 2 + 2 = 6]
𝑗𝜋 𝑗𝜋
𝑐1 = 2, 𝑐4 = 𝑒 − 4 , 𝑐−1 = 2, 𝑎𝑛𝑑𝑐−4 = 𝑒 4
ii. Plot magnitude spectrum of the system|𝐻(𝜔)|. Which frequencies (high or low) will be
attenuated by this system?
ii.
Q6: Let 𝑥(𝑡) = 𝑒 −2𝑡 𝑢(𝑡). Compute Fourier transform of the following [3+3+3 = 9 Marks]
𝑑𝑥(𝑡−2)
a) 𝑦(𝑡) = 𝑑𝑡
b) 𝑦(𝑡) = 𝑥(−𝑡)cos(10𝑡)
c) 𝑦(𝑡) = 𝑥(2𝑡)
Q7: 6 Marks
𝜋
𝑥(𝑡) = cos (2𝑡 + ) + sin(4𝑡)
4
Also sketch the magnitude and phase spectrum of the input and the output signal.
Q8: Course book Exercise 3.18 (5 Marks)
Q9: Course book Exercise 3.26 (5 Marks)