Professional Documents
Culture Documents
ITU (BSEE14)
Due Date: October 14, 2016 0830 hours (start of Friday S&S Lab)
Q1) Sketch the following signals. Clearly label both the axis:
0,
< 4
a) () = { + 2 , 4 < 3
2,
3
b) () = ( 1) () ().
0,
2
c) [] = {2 4, 2 < < 4
4 ,
4
d) [] = [ + 1] [] ()
FIG 2B.
3+4
)
2
ii)
() = 2 (
iii)
() = 2[() ()]( 1)
Q3) Sample the given signal in Figure 3 using the following impulse
functions and sketch the results.
FIG 3.
Q4) From the given plots, determine the equation of the sketched signals in
terms of u(t) :
1.
2.
3.
Q5) Decompose the given signals into their even and odd parts. You should
also sketch the signal and its even and odd parts:
2(+3) ( + 3),
2(3) ( 3),
i)
() = {
ii)
iii)
2() ()
iv)
<0
0
Express the following signals using only f(t) above and its time-shifted, time-scaled, and
time-inverted versions.
Q8).
a) Sketch a voltage signal () = || [( + 4) ( 3)] Volts.
b) Sketch a voltage signal () = 12() where () is the function from the previous problem.
c) Sketch a voltage signal () = (2) where () is function from part (a)
d) Sketch a voltage signal () = ( 2) where () is function from part (a)
e) Applying the voltage signal () across a 1000 resistor (as shown in the figure); sketch the function
() that describes the instantaneous power dissipation of the resistor (R)