Professional Documents
Culture Documents
§Triple Spur Gear type – available in Heavy Duty & Light Duty Models
§Manufactured as per IS: 3832 – 2005, ISI Marked (upto 5.0 Ton),
Certified since 1989
§Designed to minimize Effort – Only one person reqd. to lift the load
upto 5T.
§Product Design Test – accomplished successfully as per the requirement
of IS: 3832 – 2005 (4 times load lifted for 5 minutes)
§Product Endurance Test - 100 Hrs. of running at Hand Chain Pulling
Speed of 20 Mtr. / Min
§Each block tested at 50% Overload
Other Products
Guarantee :
w
Flame Proof w
Reverse Hoists One year from date of purchase on
(Manual & Electric) w
H.O.T. Cranes F.O.R. Kpadwanj basis; for free repair,
replacements of any part proved defective in
Hoists & Trolleys w
E.O.T. Cranes
material or workmanship.
w
Clutch Hoists w
Jib Cranes
In the interest of constant design improvements we reserve the right to change the design of the product without any notice
D A D
A
C
C
F
E
F
E
B
B
Single Fall Two Fall
A D
C
F
E
B
Three Fall
In the interest of constant design improvements we reserve the right to change the design of the product without any notice
Guarantee : One year from date of purchase on F.O.R. Kpadwanj basis; for free repair, replacements of any part proved defective in material or workmanship.
Plot No. 27/28, G.I.D.C., Kapadwanj – 387620, Dist. Kheda, Gujarat Phone : +91 2691 263436/ 262682, Fax : +91 2691 262079
Website : www.anker.in eMail : sales@anker.in, ankerad1@bsnl.in
A P G
B C E
B
F
C
H I
D
A
J
D
A
F
C
E
D
F
E
Fig: CH-3
Guarantee : One year from date of purchase on F.O.R. Kpadwanj basis; for free repair, replacements of any part proved defective in material or workmanship.
Plot No. 27/28, G.I.D.C., Kapadwanj – 387620, Dist. Kheda, Gujarat Phone : +91 2691 263436/ 262682, Fax : +91 2691 262079
Website : www.anker.in eMail : sales@anker.in, ankerad1@bsnl.in
A G
C
D
E
F
MH2 0.5 8x1 1.0 3.5 510 600 31.5 300 42 2.0
1.0 8x1 1.0 3.5 510 600 31.5 340 48 2.0
2.0 8x2 1.0 1.8 510 650 37.5 340 55 3.2
3.0 8x2 1.0 1.5 510 700 42.5 340 60 3.2
MH3 4.0 9x2 2.0 1.4 590 750 42.5 390 80 5.0
MH4 5.0 12 x 2 3.0 1.4 710 850 53 450 114 7.0
10.0 12 x 3 3.0 1.0 950 1020 75 480 170 11.0
Guarantee : One year from date of purchase on F.O.R. Kpadwanj basis; for free repair, replacements of any part proved defective in material or workmanship.
Plot No. 27/28, G.I.D.C., Kapadwanj – 387620, Dist. Kheda, Gujarat Phone : +91 2691 263436/ 262682, Fax : +91 2691 262079
Website : www.anker.in eMail : sales@anker.in, ankerad1@bsnl.in
J K L
A E B E
A
M G M
M G
E
L
L
H
N
K
K
O
Q
Q
H
J
P
J
C D
C
D D
Guarantee : One year from date of purchase on F.O.R. Kpadwanj basis; for free repair, replacements of any part proved defective in material or workmanship.
Plot No. 27/28, G.I.D.C., Kapadwanj – 387620, Dist. Kheda, Gujarat Phone : +91 2691 263436/ 262682, Fax : +91 2691 262079
Website : www.anker.in eMail : sales@anker.in, ankerad1@bsnl.in
CAPACITY in Tonnes 0.5 (II) 1.0 (IV) 2.0 (IV) / 2.0 (II) 3.0 (II) 3.0 (II) 3.0 (IV) 1.0 (II) 2.0 (IV) 4.0 (IV) / 6.0 (IV) / 10.0 (II)
B (CLASS) 2.5 (II) 5.0 (II) 7.5 (II)
C H M No. of Falls 2 2 2 2 2 3 2 4 4 4 4 6
LIFT (MTRS.) 6 6 6 6 6 6 6 6 6 6 6 6
APR. WEIGHT 110 270 390 220 390 280 540 145 325 510 830 990
(Fix Suspension)
(KG)
Dim. B 700 1125 1220 980 1350 1220 1305 940 1315 1370 1455 1645
A
Dim. C 500 591 620 380 750 540 620 740 771 770 770 1180
G HOISTING MOTOR 1.5 (1.1) 3 (2.2) 5 (3.7) 3 (2.2) 5 (3.7) 3 (2.2) 7.5 (5.5) 1.5 (1.1) 3 (2.2) 5 (3.7) 7.5 (5.5) 7.5 (5.5)
W.R.H. WITH H.P. (K.W.)
PULL PUSH TROLLEY
TRAVELING SPEED 16 18 18 15 16 15 18 16 18 18 18 18
Mtr./Min
TRAVELING MOTOR 0.25 0.25 0.5 0.25 0.5 0.5 0.5 0.25 0.25 0.75 0.75 0.75
E D K H.P. (K.W.) (0.18) (0.18) (0.37) (0.18) (0.37) (0.37) (0.37) (0.18) (0.18) (0.55) (0.55) (0.55)
F MIN HEIGHT OF 125 175 250 150 250 250 250 125 175 250 250 300
I BEAM - MM
Dim. F MIN - MAX 75-140 90-180 125-210 80-210 125-210 125-210 125-210 75-140 90-180 125-210 125-210 140-210
Dim. A Head Room 710 980 1160 860 1160 1100 1260 790 1035 1265 1440 1550
I
Dim. D MIN-MAX 310-340 155-200 165-180 135-200 165-180 165-180 165-180 310-340 155-200 165-180 165-180 435-470
J Dim. E MIN-MAX 400-435 400-445 415-460 365-400 415-460 415-460 415-160 400-435 400-445 415-460 415-460 435-470
Dim. G 31.5 31.5 37.5 37.5 42.5 42.5 42.5 31.5 37.5 53 67 75
Dim. H 65 130 155 300 155 300 175 65 130 155 175 85
Dim. I 125 150 200 155 200 175 250 210 265 295 375 375
Dim. J 320 375 400 160 400 160 450 320 375 400 450 635
W.R.H. WITH W.R.H. WITH Dim. K (Min) 310 310 310 310 310 310 310 310 310 310 310 500
ELECTRIC TROLLEY GEAR TROLLEY
All dimensions are in mm.
§Designed & Constructed, to give higher life of the §Gears: Alloy Steel Material, precise machined,
equipment. gear hobbed & case hardened – duly annealed.
§Rope Drum is fitted in the Drum Housing Spur / Helical combination to provide strength &
constructed inline with the Side Plates smooth operation. Gears shall be lubricated with
supporting the Rope Drum. This, instead of Long a semi-liquid grease / oil as per the designs.
distance bolts gives better strength & lesser §Motor: Conical Rotor Motor – operating on 415
skewing effect to the drum. Type 'N' Hoists are Volts, 3 Phase, 50 Hz AC Supply with In-built
designed with Long Distance Bolts. braking mechanism (For MI-0 Hoist) & Hoist Duty,
§Modular Construction: Easily accessible, Squirrel Cage Induction Motor with high starting
designed with - separate independent units – torque – operating on 415 Volts, 3 Phase, 50 Hz AC
Motor Side (Driving Part), Gearbox Supply with Electromagnetic Brake.
(Intermediate), Mechanism Side (Driven Part) & Continuously rated, Suitable for frequent
Control Unit. Giving ease of maintenance to the reversing & braking.
user. §Braking Mechanism: Disc type, Spring Loaded
§Supplied with options of fix suspension (no acting at any load position (For MI-0 Model) &
travel – only hoisting), pull-push or geared A.C. Electromagnetic Brake for Other Models.
(manual travel) or electrically operated traveling §Control Panel Unit: Totally enclosed to protect
of the load. from Weather / Dust, giving output at 24 Volts to
§Driven by Conical Rotor Motor – Z Start Motor the Operational Control Station (Push Button
(Make: Anker) for MI-0 Hoist. For Other models, Station).
Squirrel Cage Induction Motor fitted with §Operational Control Station: Suspended from
Electromagnetic Brake are used. Hoist with a Cable & supporting Wire rope – with
§Manufactured as per IS: 3938 (Indian Standard) two push buttons extendable to four / six push
for Class II & Class IV (medium duty & heavy button station. Operated with 24 Volts.
duty) application §Overload Relay: Provided for protection to Motor
§Tested at 25 % Overload §Limit Switches: Provided to control movement of
§Hooks: As per IS: 15560 – 2005, supported on Hook in Hoisting motion at decided levels
Thrust Bearings. activated by Rope Guide for Upper limit, Lower
limit & Overlowering..
§Rope Drum: Made from Seamless pipe & grooves
are at approx. 2/3rd of height of the wire rope dia. §Special Hoists with Creep Speed arrangement,
to have proper sitting in the drum. Special Control Panel Station, higher lift, Short
Head room also can be supplied at an extra cost.
§Rope Guide: Providing proper guide along the
axis of Rope slides & is easy to dismantle from
rope drum while maintenance.