Professional Documents
Culture Documents
Outcome Based Lab Task
Outcome Based Lab Task
BASED LAB
TASK
REPORT
1
LAB TASK - 3
Submitted by
SUSEENDRAN V
202IT243
2
JULY 2021
3
DECLARATION
I affirm that the lab task work titled “LAB TASK -3” being submitted as the record of
original work done by us under the guidance of Miss NANDHINI N, ASSISTANT
PROFESSOR, Department of Mechanical Engineering.
V.Suseendran
( Signature of candidate )
SUSEENDRAN V
202IT243
Miss NANDHINI N
4
PAGE NO
S.NO TABLE OF
CONTENTS
ANNEXURE 3
1
AIM 6
PROCEDURE 6
DIAGRAM 6
2 ANNEXURE 3
7
AIM
7
PROCEDURE
7
DIAGRAM
3 ANNEXURE 3
AIM 8
PROCEDURE 8
DIAGRAM
8
4 CONCLUSION 9
5
6
ANNEXURE -3
NUMBER :- 1
AIM:-
Our aim is to Draw the front, top and side views of the object.
PROCEDURE:-
Draw XY plane.
Observe the given object.
Draw its top view projection.
Draw its front view projection.
Draw its side view projection.
Mark all points and measure the length.
Darken the view lines.
7
NUMBER:-
2 AIM:-
Our aim is to Draw the front, top and side views of the object.
PROCEDURE:-
Draw XY plane.
Observe the given object.
Draw its top view projection.
Draw its front view projection.
Draw its side view projection.
Mark all points and measure the length.
Darken the view lines.
8
NUMBER :
-3 AIM:-
Our aim is to Draw the isometric view of the object, the orthographic
projections of the object is given.
Procedure:-
Observe the diagram well.
Draw XY plane.
Measure the length.
Draw a line of length 39mm
Draw another line 12mm away from the first line.
At a particular angle draw a line of length 66mm.
Connect all the line.
Draw a ramp line of height 42 mm and width 12mm.
Connect all the lines.
Draw two arcs and connect it.
9
CONCLUSION:-
10
OUTCOME BASED LAB TASKS
RUBRICS FORM (*to be filled by the lab handling faculty
only)
Student name:
Register number:
Name of the laboratory:
Name of the lab handling
faculty: Name of the task:
Experiments mapped:
1.
2.
3.
11