Professional Documents
Culture Documents
B
A REPORT
TASK
S
E
D
L
A
B
1
LAB TASK -1
Submitted by
SUSEENDRAN V
202IT243
JULY 2021
2
DECLARATION
I affirm that the lab task work titled “LAB TASK -1” being submitted as the record of
original work done by us under the guidance of Miss NANDHINI N, ASSISTANT
PROFESSOR, Department of Mechanical Engineering.
V.Suseendran
(Signature of candidate)
SUSEENDRAN V
202IT243
Miss NANDHINI N
3
PAGE NO
S.NO TABLE OF CONTENTS
ANNEXURE 1
1
AIM 5
PROCEDURE 5
DIAGRAM 5
2 ANNEXURE 1
6
AIM
6
PROCEDURE
7
DIAGRAM
3 ANNEXURE 1
AIM 8
PROCEDURE 8
DIAGRAM
9
4 CONCLUSION 10
4
ANNEXURE – 1
NUMBER: 1
AIM: -
PROCEDURE:-
1. Draw XY plane.
2. Mark Each points In its position respectively..
3. Marks all the points and measurements..
5
NUMBER: 2
AIM: -
PROCEDURE: -
1. Draw XY plane.
2. Mark a point C` 20mm above HP and make a line of 70mm in the
angle of 45 degree and mark it as D`.
3. Mark a point C 30mm in front of VP and make a line of 70mm in the
angle of 30 degree and mark it as D.
4. Extend a locus point line in both D and D` points.
5. Draw a line from D` to C1 and cut an arc at the locus line of D and
mark it as D1.`
6. Draw a line from D to C1` and cut an arc at the locus line of D` and
mark it as D1.
7. Measure the angle and length of the line D1.
8. Measure the angle and length of the line D1`.
6
7
NUMBER: 3
AIM: -
PROCEDURE: -
1) Draw XY plane.
2) Draw apex line 60mm from O.
3) Mark a Point ‘P’ 20mm above HP.
4) Draw a line of length 86mm which cuts the apex line at Q1`.
5) Mark a Point ‘P`’ 30mm in front of VP.
6) Draw a line of length 86mm which cuts the apex line at Q2`.
7) Draw a line from Q2` to Q2.
8) With Q2 as radius cut an arc at apex line and mark it as Q`.
9) Draw a line from Q1` to Q1.
10) With Q1 as radius cut an arc at apex line and mark it as Q.
11) Mark all the points and mark angles and measure the length.
8
9
CONCLUSION:-
FOR ALL THE ABOVE TASKS THE EXPECTED DIAGRAM (RESULT) HAS
BEEN ACHIEVED.
10
OUTCOME BASED LAB TASKS
RUBRICS FORM (*to be filled by the lab handling faculty only)
Student name:
Register number:
Name of the laboratory:
Name of the lab handling
faculty: Name of the task:
Experiments mapped:
1.
2.
3.
11