Rigtools clamps provide an improved solution for safely handling lifting subs during bottom hole assembly operations. Crews report the clamps reduce risks to personnel by securely holding subs without needing slings, bolts, or pins. This eliminates risks of pinched fingers when installing subs into collars using chain tongs. The clamps save time by allowing both vertical and horizontal installation of subs, with less risk of threads hanging up during removal. They directly clamp onto subs to install or remove them from BHA items.
Rigtools clamps provide an improved solution for safely handling lifting subs during bottom hole assembly operations. Crews report the clamps reduce risks to personnel by securely holding subs without needing slings, bolts, or pins. This eliminates risks of pinched fingers when installing subs into collars using chain tongs. The clamps save time by allowing both vertical and horizontal installation of subs, with less risk of threads hanging up during removal. They directly clamp onto subs to install or remove them from BHA items.
Rigtools clamps provide an improved solution for safely handling lifting subs during bottom hole assembly operations. Crews report the clamps reduce risks to personnel by securely holding subs without needing slings, bolts, or pins. This eliminates risks of pinched fingers when installing subs into collars using chain tongs. The clamps save time by allowing both vertical and horizontal installation of subs, with less risk of threads hanging up during removal. They directly clamp onto subs to install or remove them from BHA items.
on pinched fingers ! • • I believe these clamps are the best tools I have seen offshore for safety and operational performance. A good product that reduced the risk to the personnel working on building BHA operations. • Crews highly commend this product. We have tried two other designs with no success and crews were not happy to use them. I regret we did not have this product years ago. • The Rigtools Clamps make handling of our lifting subs safer and easier, no more wrapping slings round The best possible solution subs, quick and easy installation of the clamp either vertically or horizontally, no shackles bolts or safety when handling subs. pins to worry about, the subs are held securely and rotate easily so installing into collars etc. made safer with little chance of nipped or crushed fingers when using chain tongs. We have a 5½” and 5” Rigtools clamp, two of the best additions to drill floor safety and efficiency we have had.
Rigtools Clamp improves safety and efficiency when handling lifting sub's on bottom hole assemblies.
Highlights
• Time saving and more safe when installing
and removing lift subs in vertical and especially horizontal position. • No loose bolts or shackles required. • No need of lifting slings. • Less risk of hanging up in threads when removing lifting subs in vertical position. • Rigtools Clamp is clamped directly on the lifting sub when installing or removing them from BHA items. • The clamp is delivered with lifting chains and full certification for offshore use.