Professional Documents
Culture Documents
Frequently it is required that motors shall start and stop in a certain sequence. This can be
achieved by interlock of the control. In the represented circuit (in coherent representation)
motor M 2 can be operated only if motor M1 is already running. For the stop M 2 has to be
switched off before M1 can be switched off.
There is to do:
1. Draw the current flow diagram of the control circuit in detached representation. There is
only to complete the present drawing.
5. Wire the circuit on the exercise board by using the wiring diagram.
L1
- K1 - K2
Power circuit:
Wiring diagram:
-X1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
-X1
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40