Professional Documents
Culture Documents
OPERATOR TIPS
Operation and Maintenance Manual thoroughly
and make sure that you understand the content.
Types of Regeneration
Passive Active Manual Stationary
» Invisible to the operator » Automatically started » Manually started by operator after machine prompt
» Always occurring » No effect on operation » Machine must be in the correct idling position
» Exhaust temperatures are normal » Exhaust temperatures may be HIGH » Exhaust temperatures may be VERY HIGH
Run a manual stationary regeneration The aftertreatment system is damaged, regeneration is no longer available.
3 4
1
1 Get to the KDPF Regeneration screen 4 Press again to confirm the disable
1 5
3 4
View
Demonstration 1300 566 287 | komatsu.com.au
KDPF REGENERATION This Cab Card is not a substitute for the Operation
and Maintenance Manual. Always read the
OPERATOR TIPS
Operation and Maintenance Manual thoroughly
and make sure that you understand the content.
Excavators Bulldozers
Manual Stationary Regeneration Request Manual Stationary Regeneration Required KDPF system damage - manual stationary
» Complete current work » Stop current work regeneration is disabled
» Move machine to a safe place » Move machine to a safe place » Stop the engine IMMEDIATELY
» Place in correct idle position » Place in correct idle position » Contact your Komatsu distributor for
» Perform manual stationary regeneration » Perform manual stationary regeneration assistance and service
View
Demonstration 1300 566 287 | komatsu.com.au