Professional Documents
Culture Documents
(Autonomous)
Paritala, Kanchikacherla (MD), Krishna Dt. AP, India – 521 180
Mid-I Examination, July-2021
Programme - B.Tech; Branch- CIVIL ENGINEERING ; Year : I11; Semester-II
Subject: DESIGN AND DRAWING OF STEEL STRUCTURES
Date:01-07-2021 AY:2020-21 SET-I Duration: 1:30 Hrs
Name of the Faculty: G.MANIDHAR Max Marks: 15 Min Passing Marks:08
Note: All Questions are compulsory. Question 1 through 3 carry 5 marks each.
Q.1 Explain the various types of fillet welds with neat sketches. (05)
Section ISMB 400 Span 8m subjected to a live load of 16 KN/m and the beam is
Q.2 (05)
laterally supported check the beam for bending, shear and deflection
Determine the tensile strength of a roof truss member 2 ISA 90 X 60X 6mm
Q.3 connected to the gusset plate of 8mm plate by 4mm weld. The effective length of (05)
weld is 200mm
Note: All Questions are compulsory. Question 1 through 3 carry 5 marks each.
A welded crane bracket support a load of 120 kN at a distance of 150 mm from the
edge of a column, using 15 mm thick plate. Design the connection. Assume any
Q.1 (05)
missing data.
Note: All Questions are compulsory. Question 1 through 3 carry 5 marks each.
A tie member consisting of an ISA 80x50x8 section of Fe410 grade steel is welded
Q.1 to a 12mm thick gusset plate at site. Design welds to transmit load equal to the (05)
design strength of the member.
Section ISMB 450 Span 8m subjected to a live load of 16 KN/m and the beam is
Q.2 (05)
laterally supported check the beam for bending, shear and deflection
Determine the tensile strength of a roof truss member 2 ISA 90 X 60X 8mm
Q.3 connected to the gusset plate of 10mm plate by 4mm weld. The effective length of (05)
weld is 250mm
Note: All Questions are compulsory. Question 1 through 3 carry 5 marks each.
Q.1 Explain various types of butt welds. Describe procedure for designing a butt weld. (05)