Professional Documents
Culture Documents
Name ID no section
1, Mulatu mared cesr/0577/09 1
i
Contents
Objective ....................................................................................................................................................... 1
Introduction .................................................................................................................................................. 1
Materials and methods ................................................................................................................................. 1
Result ............................................................................................................................................................ 2
Decision ......................................................................................................................................................... 3
Conclusion ..................................................................................................................................................... 4
References .................................................................................................................................................... 5
ii
Objective
The main purpose of this garbage waste storage is to store solid hazardous wastage
Introduction
A garbage storage is stationary device, designed to contain an accumulation of hazardous waste
which is constructed primarily of non-earthen materials which provides structural support
Must be inspected by an independent qualified expert prior to use to ensure that the tank was not
damaged during installation.
The wastage box designed and maintained to contain solid waste without falling, collapse or
rupturing. It is positioned in roadsides, home, office and it must be kept closed, expect when
adding or removing
1
Methods
First safety in the work shop so we wear safety jackets, glove and safety shoes for the
health care. Then we cut sheet metal based on determined dimension by the grinder. After
cutting sheet metal we cut the rectangular tubes based on given measurement. Finally we
connect them with welding. Finally it become box shape.
Result
This experiment is generally how we produce the waste storage in the work shop.
Sheet metal 30 40 1 4
Sheet meta 30 2 4
Rectangular 70 5
Tubes 1.5
Iron 5 2 1
steel
2
cost analysis
NO Material number of item cost in birr
1 sheet metal 4 200
2 pipe 5 100
3 spring 1 30
4 paint 1 100
total 1 430
Decision
The wastage box designed and maintained to contain solid waste without falling, collapse
or rupturing. As the garbage storage it will been positioned any place. It is positioned in
roadsides, home, office and it must be kept closed, expect when adding or removing. The
opening system done by spring system. That mean if any boy want to add wastage he/she
press pedal legs. Then it is open return back to closed due to application of spring.as
generally the working system of garbage storage is depend up on the pedal and spring
system. the box pedal press by the leg it be open for adding hazardous wastage. And return
back due to application of spring. As we know spring is compress and expand in nature.
3
Conclusion
Finally we can conclude the following deductions from the above experimental and analysis part.
Garbage storage for solid wastage to be one of the promising techniques for the storing wastage as this
process will preserve the environmental qualities of the people. Garbage storage is a special type of
wastage storing technics around rod sides, office home etc.
4
References
[1] . Solar Stirling Engine for Remote Power and Disaster Relief
5
6