Professional Documents
Culture Documents
03/2011
READ AND UNDERSTAND FIRST, THEN ACT
1(3) February 23, 2011
VDO CAN-cockpit GEN2 panel meters manufacturing has been terminated. A small
batch of GEN2 -series meters are in the stock for spare part use.
GEN 3 VDO panel meters have been released and used in Sandvik UG drill from
Q1/2010. These new meters are not interchangeable with earlier GEN1 and GEN2
series.
Service bulletin 13/08 was released on 2008 to inform about GEN1 meters
manufacturing termination.
This document shall be incorporated in the "information of use" documentation and kept there for the life of the product. Unless
otherwise specified, Sandvik accepts no responsibility for changes, labor or replacements incurred from this bulletin.
BULLETINS RELEASED IN 2011
UG 1 2 3
© 2011 SANDVIK MINING AND CONSTRUCTION, Tampere plant Tel.int. +358 205 44 121, Telefax int. +358 205 44 4418
P.O.Box 100, FIN-33311 Tampere, FINLAND www.sandvik.com
PARTS BULLETIN 03/2011 2(3) February 23, 2011
Solution:
For machines with Mercedes Benz engine kits includes master gauge (100), fuel
gauge (110), brake pressure gauges 1 and 2 (120,130) and the plug cable set (111,
121, 131) for gauges. For Deutz engine kits include master gauge (100), fuel gauge
(110) and the plug cable set (111) for gauges.
How to proceed:
1. Always when ordering a separate meter or the complete set of meters, the ID-
code and software version from existing master gauge (ø 80mm) must be
mentioned. This will ensure the correct meters when ordering new ones.
Master VDO ID *
GEN1 A2C60000001
GEN2 A2C60000011
GEN3 A2C60000020
This document shall be incorporated in the "information of use" documentation and kept there for the life of the product. Unless
otherwise specified, Sandvik accepts no responsibility for changes, labor or replacements incurred from this bulletin.
© 2011 SANDVIK MINING AND CONSTRUCTION, Tampere plant Tel.int. +358 205 44 121, Telefax int. +358 205 44 4418
P.O.Box 100, FIN-33311 Tampere, FINLAND www.sandvik.com
PARTS BULLETIN 03/2011 3(3) February 23, 2011
2. When replacing the separate meter for the machine where the existing meters are
GEN1 series, the whole panel meter set must be replaced with a correct GEN3 kit
from the list above. Order suitable kit through SMC Logistics LTD.
3. When replacing the separate meter for the machine where the existing meters are
GEN 2 series, the whole panel meter set must be replaced with a correct GEN3 kit
from the list above. Order suitable kit through SMC Logistics LTD.
When ordering, it is recommended to ask if separate GEN2 meters are
available as there is a small batch of GEN2 meters for spare part use.
4. When replacing the separate meter from the GEN3 set, then it is only needed to
replace that specified meter. ID’s for separate panel meters can be found from the
appendix
5.
GEN1, GEN2 and GEN3 panel meters must not be mixed with
each other. It may cause meters to fail.
More info of separate GEN1-GEN3 panel meters and kits can be found from the
appendix 1.
APPENDICES:
This document shall be incorporated in the "information of use" documentation and kept there for the life of the product. Unless
otherwise specified, Sandvik accepts no responsibility for changes, labor or replacements incurred from this bulletin.
© 2011 SANDVIK MINING AND CONSTRUCTION, Tampere plant Tel.int. +358 205 44 121, Telefax int. +358 205 44 4418
P.O.Box 100, FIN-33311 Tampere, FINLAND www.sandvik.com
1(3)
VDO panel meters used in Sandvik
UG drills
VDO panel meters used in Axera 7 and Sandvik 400/700-series with MB engine
Programmed electronic
GEN I 55044241 VDO CanCockpit master GEN I (fw12A5) + Software TC7MB v1.xx
assembly
Programmed electronic VDO CanCockpit master GEN II (fw12A7) + Software 400/700 (TC7) MB
GEN II 55076780
assembly v2.xx/v3.xx
GEN I 55041618 Panel meter Fuel level gauge VDO CANcockpit GEN I satellite
GEN II 55074842 Panel meter Fuel level gauge VDO CANcockpit GEN II satellite 52mm, 0-1/2-1
GEN I 55044901 Panel meter Pressure gauge VDO CANcockpit GEN I satellite, 0-250 bar (1)
GEN II 55074843 Panel meter Pressure gauge VDO CANcockpit GEN II satellite, 0-250 bar (1)
GEN I 55044902 Panel meter Pressure gauge VDO CANcockpit GEN I satellite, 0-250 bar (2)
GEN II 55074844 Panel meter Pressure gauge VDO CANcockpit GEN II satellite, 0-250 bar (2)
Separate meter above must be replaced with a kit 55181484, which includes following components:
Programmed electronic
GEN III 55174351 VDO CanCockpit master GEN III (fw12A8) + Software 400/700 (TC7) MB v4.00
assembly
GEN III 55171071 Panel meter Fuel level gauge VDO CANcockpit GEN III satellite 52mm, 0-1/2-1
GEN III 55171072 Panel meter Pressure gauge VDO CANcockpit GEN III satellite 52mm, 0-250 bar (1)
GEN III 55171073 Panel meter Pressure gauge VDO CANcockpit GEN III satellite 52mm, 0-250 bar (2)
GEN III 55174357 WIre kit Plug cable, CANcockpit,GEN III, master-satellite-satellite-satellite
Programmed electronic
GEN I 55048548 VDO CanCockpit+ master GEN I + Software TC7 DEUTZ v1.xx
assembly
Programmed electronic
GEN II 55076814 VDO CanCockpit master GEN II + Software 400/700 (TC7) DEUTZ v2.xx/v3.xx
assembly
GEN I 55041618 Panel meter Fuel level gauge VDO CANcockpit GEN I satellite
GEN II 55074842 Panel meter Fuel level gauge VDO CANcockpit GEN II satellite 52mm, 0-1/2-1
Separate meter above must be replaced with a kit 55181486, which includes following components:
Programmed electronic
GEN III 55179300 VDO CanCockpit master GEN III + Software 400/700 (TC7) DEUTZ v4.00 **
assembly
GEN III 55171071 Panel meter Fuel level gauge VDO CANcockpit GEN III satellite 52mm, 0-1/2-1
GEN III 55171084 WIre kit Plug cable, CANcockpit,GEN III, master-satellite
Programmed electronic
GEN II 55061767 VDO CanCockpit master GEN II (fw12A7) + Software 500/800 (TC8) MB v3.01
assembly
GEN II 55074842 Panel meter Fuel level gauge VDO CANcockpit GEN II satellite 52mm, 0-1/2-1
GEN II 55074843 Panel meter Pressure gauge VDO CANcockpit GEN II satellite, 0-250 bar (1)
GEN II 55074844 Panel meter Pressure gauge VDO CANcockpit GEN II satellite, 0-250 bar (2)
© 2011 SANDVIK MINING AND CONSTRUCTION, Tampere plant Tel.int. +358 205 44 121, Telefax int. +358 205 44 4418
P.O.Box 100, FIN-33311 Tampere, FINLAND www.sandvik.com
2(3)
VDO panel meters used in Sandvik
UG drills
Separate meter above must be replaced with a kit 55181465, which includes following components:
Programmed electronic
GEN III 55174355 VDO CanCockpit master GEN III (fw12A8) + Software 500/800 (TC8) MB v4.00
assembly
GEN III 55171071 Panel meter Fuel level gauge VDO CANcockpit GEN III satellite 52mm, 0-1/2-1
GEN III 55171072 Panel meter Pressure gauge VDO CANcockpit GEN III satellite 52mm, 0-250 bar (1)
GEN III 55171073 Panel meter Pressure gauge VDO CANcockpit GEN III satellite 52mm, 0-250 bar (2)
GEN III 55174357 WIre kit Plug cable, CANcockpit,GEN III, master-satellite-satellite-satellite
Programmed electronic VDO CanCockpit master GEN II (fw12A7) + Software DL520-W (TC8i-W100)
GEN II 55076155
assembly MB v3.00
GEN II 55074842 Panel meter Fuel level gauge VDO CANcockpit GEN II satellite 52mm, 0-1/2-1
GEN II 55074843 Panel meter Pressure gauge VDO CANcockpit GEN II satellite, 0-250 bar (1)
GEN II 55074844 Panel meter Pressure gauge VDO CANcockpit GEN II satellite, 0-250 bar (2)
Separate meter above must be replaced with a kit 55181519, which includes following components:
Programmed electronic VDO CanCockpit master GEN III (fw12A8) + Software DL520-W (TC8i-W100)
GEN III 55181526
assembly MB v4.00
GEN III 55171071 Panel meter Fuel level gauge VDO CANcockpit GEN III satellite 52mm, 0-1/2-1
GEN III 55171072 Panel meter Pressure gauge VDO CANcockpit GEN III satellite 52mm, 0-250 bar (1)
GEN III 55171073 Panel meter Pressure gauge VDO CANcockpit GEN III satellite 52mm, 0-250 bar (2)
GEN III 55174357 WIre kit Plug cable, CANcockpit,GEN III, master-satellite-satellite-satellite
Programmed electronic
GEN II 55044290 VDO CanCockpit master GEN II (fw12A7) + Software 900i (TC9i) MB v3.01
assembly
GEN II 55074842 Panel meter Fuel level gauge VDO CANcockpit GEN II satellite 52mm, 0-1/2-1
GEN II 55074843 Panel meter Pressure gauge VDO CANcockpit GEN II satellite, 0-250 bar (1)
GEN II 55074844 Panel meter Pressure gauge VDO CANcockpit GEN II satellite, 0-250 bar (2)
Separate meter above must be replaced with a kit 55181470, which includes following components:
Programmed electronic
GEN III 55174356 VDO CanCockpit master GEN III (fw12A8) + Software 900i (TC9i) MB v4.00
assembly
GEN III 55171071 Panel meter Fuel level gauge VDO CANcockpit GEN III satellite 52mm, 0-1/2-1
GEN III 55171072 Panel meter Pressure gauge VDO CANcockpit GEN III satellite 52mm, 0-250 bar (1)
GEN III 55171073 Panel meter Pressure gauge VDO CANcockpit GEN III satellite 52mm, 0-250 bar (2)
GEN III 55174357 WIre kit Plug cable, CANcockpit,GEN III, master-satellite-satellite-satellite
Programmed electronic VDO CANCockpit master GEN II (fw 12A7) + Software 1000(i)/1100(i)/1200(i)
GEN II 55061769
assembly MB v3.01
GEN II 55074842 Panel meter Fuel level gauge VDO CANcockpit GEN II satellite 52mm, 0-1/2-1
GEN II 55074843 Panel meter Pressure gauge VDO CANcockpit GEN II satellite, 0-250 bar (1)
GEN II 55074844 Panel meter Pressure gauge VDO CANcockpit GEN II satellite, 0-250 bar (2)
© 2011 SANDVIK MINING AND CONSTRUCTION, Tampere plant Tel.int. +358 205 44 121, Telefax int. +358 205 44 4418
P.O.Box 100, FIN-33311 Tampere, FINLAND www.sandvik.com
3(3)
VDO panel meters used in Sandvik
UG drills
Separate meter above must be replaced with a kit 55181471, which includes following components:
Programmed electronic VDO CANCockpit master GEN III (fw 12A8) + Software 1000(i)/1100(i)/1200(i)
GEN III 55173311
assembly MB v4.00
GEN III 55171071 Panel meter Fuel level gauge VDO CANcockpit GEN III satellite 52mm, 0-1/2-1
GEN III 55171072 Panel meter Pressure gauge VDO CANcockpit GEN III satellite 52mm, 0-250 bar (1)
GEN III 55171073 Panel meter Pressure gauge VDO CANcockpit GEN III satellite 52mm, 0-250 bar (2)
GEN III 55174357 WIre kit Plug cable, CANcockpit,GEN III, master-satellite-satellite-satellite
© 2011 SANDVIK MINING AND CONSTRUCTION, Tampere plant Tel.int. +358 205 44 121, Telefax int. +358 205 44 4418
P.O.Box 100, FIN-33311 Tampere, FINLAND www.sandvik.com