Professional Documents
Culture Documents
EI Series Balancing
EI Series Balancing
2
EI SERIES BALANCING MACHINES
EI-300
The EI-300 balancing
machine is ideal for
all types of rotating
parts up to 300 kg, like
rollers,electric motor
rotors, crankshafts, fans,
mills and more. The soft
bearing suspensions are
manufactured using the
highest quality lowest
friction components.
• Easy ajustment of the transmission system Maximum radial displacement 12 mm (0.5 in)
Maximum shaft diameter 101 mm (4 in)
and support distance Distance between supports min/max 100 mm (4 in) / 1778 mm (70 in)
• Soft bearing suspension to minimize Transmision V Band Type A
4
EI SERIES BALANCING MACHINES
EI-2000
The EI- 2000 balancing
machine is built for industry
and rotors to 2000 kg , just
like machine rolls, motors
rotors, large crankshafts,
mills and more. The soft
bearing suspensions of
the EI-300 are made of
ultralightweight anti-friction
components.
• 3 liberty axis per pedestal Maximum rotor diameter 2000 mm (79 in)
• Easy ajust of the transmission system and Maximum weight per base 1000 kg (2200 lb)
support distance
Maximum radial displacement 12 mm (0.5 in)
• Soft bearing suspension to minimize
friction. Maximum shaft diameter 228 mm (9 in)
3.73 kW (5 hp)
Motor caracteristics
220/440 V, 3 fases, 4 polos
5
EI SERIES BALANCING MACHINES
EI-4500
6
EI SERIES BALANCING MACHINES
EI-6000
A 1 686.3 mm / 66.40”
B 1 371.6 mm / 54.00”
C 2 000 mm / 78.74”
7
EI SERIES BALANCING MACHINES
+DigivibeMX M10
Powerful...
Precise..
Performance.
The dynamic
balancing
system
DigivibeMX M10 is the most powerful and precise solutions for dynamic
balancing available on the market today. It is built with an intuitive interface
and designed for both novice and for the most demanding users.
Excellent precision
With this system you can obtain superior
balancing quality
Quality grad: G 0.4 @ 30 000 rpm
Residual Unbalance: 1g mm/100 Kg
Speed: 0.01 mm/s (ISO 10816)
8
EI SERIES BALANCING MACHINES
Functions and
tools
easy to use
Balancing Tools
2 Polar Graphs Balancing calculator with 12 Automatic balancing reports:
functions: Runs values separates in tables
Add or remove weight Balancing evolution in RMS and filtered
Separate and combine weights values
Trial Weights FFT spectra
Balancing in series ( without trial weights)
Signal based on time in waterfall format
Drill depth
Plate size Polar graphics with vibration phase
Residual Unbalance Final spectrum
Quality grade
Balancing report
Bode diagram
Frequency response
Soft Bearing
Suspension Mode
9
EI SERIES BALANCING MACHINES
DigivibeMX includes:
2-Channel interface Accelerometer Laser Optical Sensor
4-pin connectors (1-A, 1-B, 2) for Dinamyc Impact Shock: 50g peak (max Analogic output / Range: 1 - 5000 Hz
24V accelerometers shock 5000g) Power and current
5-pin connector (Op) for Optical Sensor Freq. response (+/- 3dB): 0.32 - 13000 Hz supply: 5V , 20 - 30 mA.
Selector button (Ch 1 / Ch 2) Freq. response (+/- 5%): 2 - 10000 Hz Voltage drop: <0.4 V
Cable with USB connector (15cm) Sensitivity: 100 mV/g +/- 10% Short circuit, Reverse Voltage and
Weight 230g Transverse sensitivity: < 5% Over-Voltage (15V for 1min) protection
Dimensions (mm): 60(d) x 90(w) x 30(h) Power supply: 18-30 V / 3-8 mA Operation distance: up to 15 m
Short-circuit protection Operating temp: −10 - 50 °C
Cables Calibrator Storing temp: −40 - 85 °C
Operation temp.: −10 - 50 °C
Protection grade: IP 67, III Protection grade: IP 67, III
Impact resistance: IEC 60028-27 Impact Resistance: IEC 60028-27
Standard 2-Pin MIL connector Weight 60 g
Magnetic Base Nylamid body
Weight 50g
Stainless steel body
System requirements
Hardware & Software Requirements:
Processor 1.6 GHz Minimum
1 GB RAM Minimum
Windows 7 or newer (supports Windows
8.1 & Windows 10*)
SVGA Monitor or better
“Touch” mode for touch screen
300 MB free disk space
1 USB 2.0 port
*No available on Windows Mobile or Windows RT.
10
EI SERIES BALANCING MACHINES
Accessories
The EI Series balancing
machines have a
wide range of optional
accessories and
supplies to improve
perfomrance and
reliability.
Accessory required to secure rotors with high vibration levels like crankshafts.
11
Service & Support Engineer
1-877-223-4606 /+52 (55) 6280-7654 / 7592-2130
support@erbessd-instruments.com
support@erbessd-reliability.com
Sales
info@erbessd-instruments.com
info@erbessdreliability.com
BUY ONLINE
www.erbessd-instruments.com
www.erbessdreliability.com/
TODAS LAS IMÁGENES CONTENIDAS SON CON FINES ILUSTRATIVOS. EL PRODUCTO PUEDE VARIAR
DEPENDIENDO DE LA VERSIÓN Y/O DE LAS ACTUALIZACIONES QUE SE REALICEN A LOS DISPOSITIVOS
© 2017 ERBESSD INSTRUMENTS S. A. DE C. V.
A-2017.0207.15