This document provides design specifications for a 16" nozzle on a vessel including:
- Design pressure of 689470 pa
- Nozzle ID of 396.84 mm
- Required reinforcement area of -172.581277 mm2
- Reinforcement pad outside diameter of 500 mm
- Calculations determine that no reinforcement is required as the area available in the shell and nozzle is greater than the required reinforcement area.
This document provides design specifications for a 16" nozzle on a vessel including:
- Design pressure of 689470 pa
- Nozzle ID of 396.84 mm
- Required reinforcement area of -172.581277 mm2
- Reinforcement pad outside diameter of 500 mm
- Calculations determine that no reinforcement is required as the area available in the shell and nozzle is greater than the required reinforcement area.
This document provides design specifications for a 16" nozzle on a vessel including:
- Design pressure of 689470 pa
- Nozzle ID of 396.84 mm
- Required reinforcement area of -172.581277 mm2
- Reinforcement pad outside diameter of 500 mm
- Calculations determine that no reinforcement is required as the area available in the shell and nozzle is greater than the required reinforcement area.
Diameter of Openning , d 396.84 mm Shell thichkness, t 6 mm Shell thickness required, tr 2.9145 mm Min Allowable stress in shell, Sv 106523115 pa Nozzle Size ND 16 in Nozzle ID 396.84 mm Nozzle thickness, tn 4.78 mm Nozzle thickness required, trn 1.289278752 mm factor F 1 Max allowable stress in nozzle , Sn 106523115 pa fr1 = Sn/Sv 1 fr2=Sn/Sv 1 Nozzle Weld Efficiency 1 E1 1
OutsideFillet weld Leg
Inside Fillet weld leg
requried reinforcement area -172.581277
Reinforcement pad outside dia 500 mm Max Allowable sress in Reinforceme 115141490 Pa fr4 = Sp/ Sv 1 Reinforcement pad thickness -1.84381707 mm orcement Requirement
Area Required , A 1156.59018 mm2
Area available in shell,A1 1224.44982 Area Available in nozzle , A2 104.721637 Area available in weld, A41 0 Area availble in weld inside, A 43 0 No Reinforcement Required