Professional Documents
Culture Documents
01-General Information en US-03
01-General Information en US-03
General Information
Waterleaks
Diagnostic Information and
Procedures
Object-ID=2609524 Owner=Warrilow, Lisa LMD=22-Mar-2011 LMB=Warrilow, Lisa
95572 95574
Note: Use a water hose without the nozzle attached. Caution: SIO-ID=2051845 LMD=24-Jan-2008 The air hose test
1. Have an assistant inside of the vehicle in order to should only be used on fully cured urethane adhesive.
locate the leak. Otherwise, damage to the urethane adhesive bead
could result in additional leaks.
2. Begin testing at the base of the window or the
windshield. 1. Using a liquid detergent, diluted with water in a
spray bottle, spray the window at the edges. Begin
3. Slowly move the hose upward and across the top at the bottom and gradually move up and across
of the vehicle. the top.
Note: The compressed air should not exceed 205 kPa
(30 psi).
2. Have an assistant inside of the vehicle with an
air hose.
3. Have the assistant aim the compressed air at the
suspected areas.
2014 - Spin Service Manual (5618083) - (Misc Draft) - 6/7/13
Waterleaks 1-31
Bubbles will form in the soap solution at the
location of the leak.
BLANK