Professional Documents
Culture Documents
Results: Envelope
The results of any calculated envelope can be displayed. The list is empty at first. The user has to select
one of the existing envelopes to fill the list with the results.
Setting Description
File Select the file containing the results to be shown. After clicking
the arrow beside the list of the CALCULATED envelopes will be
displayed, select one of them.
ElNo/Node Element number (if 'Element' is selected) or node (if the 'Node'
is selected) to be displayed in the listing
Tendon Number of tendon (if 'Tendon' is selected) for which the results
in the element division points will be shown.
Comb. Select a combination, for which the results will be shown. Click
the arrow beside to open the list of possible superposition
combinations.
Choice The results for elements, nodes OR tendons are displayed in the
Element/Node/Tendon listing.
Choice Global/Local The results in the list can be shown for the GLOBAL resp. LOCAL
element coordinate system.(only for Option
Element/Tendon!).In case of Element the local results mean the
results in direction of element, the GLOBAL results mean the
results in direction of global coordinate system axis. In case of
tendons the local results mean the results in direction of
elements, the GLOBAL results mean the results in direction of
tendons.
Ntel Pnt The element results will be shown for begin and end point of
the element only. If an element subdivision is defined, the
intermediate point results can also be displayed by using the
button NTEL.
Choice results: The results in the list can be shown for forces/stresses
total/primary/secondary
Choice type: The results in the list can be shown for composite elements as:
normal/splitted/jointed
Normal the results will be shown only for composite
elements
Splitted the results will be shown also for partial
elements of the composite element
Jointed the results for composite elements will be
represented as sum of partial element results and
composite element result
mk:@MSITStore:C:\Program%20Files\Bentley\RMBridge\v11.04.00.17\rmev10\rm9e... 30/6/2020
Results: Envelope Page 2 of 2
Setting Description
ElemGrp The results in the list can be shown for certain element group
After clicking the arrow beside the list all existing element
groups will be displayed.
PRINT The button is used to print the screen list to the file. There is
possible to set the series and type of elements to be print out. If
nothing is set, the complete list will be print out.
MAX/MIN Value To get the max/min value from the listing, one of six
displacements/forces has to be selected. There is possible to set
the series and type of elements, too. By using the MAXIMUM or
MINIMUM button the program find out the corresponding value
and highlights the line in the listing.
To get the Max/Min values from the listing, one of the six
Displacements (Vx, Vy, Vz, Rx, Ry, Rz), Forces (Nx, Qy, Qz, Mx,
My, Mz), or Normal/Shear Stress (Sig XX, Tau YZ) should be
selected. There is possible to set the series and type of elements
as well. By clicking on the Max or Min button, the corresponding
value will be highlighted in the listing .
Note: For Normal or Shear stress, Stress Leading Points need to
be selected from the dropdown menu.
Related reference
Selection of a component of the result vector
List of reference sets
mk:@MSITStore:C:\Program%20Files\Bentley\RMBridge\v11.04.00.17\rmev10\rm9e... 30/6/2020