Professional Documents
Culture Documents
1. Email *
2. NAME *
3. REG NO. *
a) INC
b) SUBB
c) SUB
d) DEC
https://docs.google.com/forms/d/1T5KQPFPUhk7lqaBNUI3Swf9jzSbOmebugbNCiQKebrg/edit 1/6
8/4/2021 EC8681 - MCQ AU EXAM
a) direction flag
b) carry flag
c) parity flag
d) trap flag
8. 5. In which T-state does the CPU send the address to memory or I/O and the ALE
signal for demultiplexing ________ *
A) T1
B) T2
C) T3
D) T4
https://docs.google.com/forms/d/1T5KQPFPUhk7lqaBNUI3Swf9jzSbOmebugbNCiQKebrg/edit 2/6
8/4/2021 EC8681 - MCQ AU EXAM
A) Minimum Mode
B) Maximum Mode
C) Both A and B
D) Control Mode
10. 7. If S’2 =0, S’1 =1, S’0 =1, what is the status of the microprocessor? *
A) Interrupt Acknowledge
D) Halt
11. 8. To save the DAC from negative transients the device connected between
OUT1 and OUT2 of AD 7523 is *
b) Zener
c) FET
https://docs.google.com/forms/d/1T5KQPFPUhk7lqaBNUI3Swf9jzSbOmebugbNCiQKebrg/edit 3/6
8/4/2021 EC8681 - MCQ AU EXAM
12. 9. The register that keeps track of all the DMA channel pending requests and
status of their terminal counts is *
a) mask register
b) request register
c) status register
d) count register
13. 10. In control word format (8254), if RL1=1, RL0=1 then the operation performed
is *
14. 11. The higher and lower bytes of a 16-bit register DPTR are represented
respectively as *
https://docs.google.com/forms/d/1T5KQPFPUhk7lqaBNUI3Swf9jzSbOmebugbNCiQKebrg/edit 4/6
8/4/2021 EC8681 - MCQ AU EXAM
a) register instructions
c) indexed addressing
d) none
a) arithmetic instructions
b) boolean instructions
c) logical instructions
d) none
c) Is the destination or the final register where the result is obtained after the
operation of the timer
18. 15. Why are relays used for driving the motors? *
c) they are used to reduce the back emf from the motors
https://docs.google.com/forms/d/1T5KQPFPUhk7lqaBNUI3Swf9jzSbOmebugbNCiQKebrg/edit 5/6
8/4/2021 EC8681 - MCQ AU EXAM
Forms
https://docs.google.com/forms/d/1T5KQPFPUhk7lqaBNUI3Swf9jzSbOmebugbNCiQKebrg/edit 6/6