Professional Documents
Culture Documents
Mechanical Building Material Bitumen (Industrial) Loss on Heating IS 1212: 1978 0.01 % to 5 % 0.07 % @0.09% Permanent Facility
Mechanical Building Material Bitumen (Industrial/Paving) Ductility IS 1208: 1978 0.0 cm to 100 cm 3.81 cm@96.6 cm Permanent Facility
Mechanical Building Material Bitumen (Industrial/Paving) Penetration Test IS 1203: 1978 1 mm to 80 mm 2.54 mm @ 49.80mm Permanent Facility
Bitumen (Industrial/Paving/Polymer
Mechanical Building Material Flash Point IS 1209: 1978 200⁰C to 350⁰C 15.05 oC@ 314.0 Permanent Facility
Modified Bitumen)
Bitumen (Industrial/Paving/Polymer
Mechanical Building Material Softening Point IS 1205: 1978 40 ⁰C to 180⁰C 2.14 oC@ 53.9 oC Permanent Facility
Modified Bitumen)
Mechanical Building Material Bitumen (Paving) Solubility in Trichloroethylene IS 1216: 1978 70 % to 100 % 1.45 % @99.55% Permanent Facility
Mechanical Building Material Bituminous Mix/Core Bitumen Content ASTM D 2172: 2017 2 % to 18 % 0.13 % @5.26% Permanent Facility
Thickness of Bituminous
Mechanical Building Material Bituminous Mix/Core Permanent Facility
Layer
Mechanical Building Material Paver Block Compressive Strength IS 15658 (Annexure D): 2006 2 N/mm2 to 25 N/mm2 0.88 N/mm2@ 10.82N/mm2 Permanent Facility
Mechanical Building Material Paver Block Abrasion Resistance IS 15658 (Annexure E): 2006 2 N/mm2 to 25 N/mm2 0.88 N/mm2@ 10.82N/mm2 Permanent Facility
Mechanical Building Material Paver Block Dimesnsions IS 15658 (Annexure B): 2006 2 N/mm2 to 25 N/mm2 0.88 N/mm2@ 10.82N/mm2 Permanent Facility
Mechanical Building Material Paver Block Thickness of Wearing Layer IS 15658 : 2006 2 N/mm2 to 25 N/mm2 0.88 N/mm2@ 10.82N/mm2 Permanent Facility
Mechanical Building Material Paver Block Water Absorption IS 15658 (Annexure C): 2006 2 N/mm2 to 25 N/mm2 0.88 N/mm2@ 10.82N/mm2 Permanent Facility
Mechanical Building Material Cement Compressive Strength IS 4031 (Part 6): 1988 10 N/mm2 to 70 N/mm2 3.71N/mm2 @ 35.7N/mm2 Permanent Facility
Mechanical Building Material Cement Consistency IS 4031 (Part 4): 1988 10 % to 35 % 1.57 % @28.76% Permanent Facility
Mechanical Building Material Cement Density IS 4031 (Part 11):1988 2 gm/cc to 4 gm/cc 0.01 gm/cc @ 2.84 gm/cc Permanent Facility
Mechanical Building Material Cement Fineness Test (Dry) IS 4031 (Part 1): 1996 1 % to 30 % 0.56 % @2.13% Permanent Facility
Mechanical Building Material Cement Soundness by Autoclave IS 4031 (Part 3): 1988 0.01 % to 2 % 0.02 % @0.04% Permanent Facility
Mechanical Building Material Cement Concrete Flooring Tile Flatness IS 1237: 2012 0.01 mm to 10 mm 0.11 mm @ 0.71mm Permanent Facility
Mechanical Building Material Cement Concrete Flooring Tile Perpendicularity IS 1237: 2012 0.01 % to 5 % 0.08 % @ 0.22% Permanent Facility
Mechanical Building Material Cement Concrete Flooring Tile Straightness IS 1237: 2012 0.0 % to 5 % 0.02 % @0.16% Permanent Facility
Mechanical Building Material Cement Concrete Flooring Tile Water Absorption IS 1237: 2012 0.1 % to 20 % 0.78 % @5.85% Permanent Facility
Mechanical Building Material Cement Concrete Flooring Tile Wet Transverse Strength IS 1237: 2012 1 N/mm2 to 10 N/mm2 0.39N/mm2 @3.7 N/mm2 Permanent Facility
Mechanical Building Material Ceramic Tile/Vitrified Tiles Rectangularity IS 13630 (Part 1):2019 0.01 % to 5 % 0.06 % @0.3% Permanent Facility
Mechanical Building Material Ceramic Tile/Vitrified Tiles Straightness IS 13630 (Part 1): 0.0 % to 5 % 0.07 % @0.22% Permanent Facility
Mechanical Building Material Ceramic Tile/Vitrified Tiles Water Absorption IS 13630 (Part 2): 0.1 % to 20 % 0.64 % @5.36% Permanent Facility
Mechanical Building Material Chequered Cement Concrete Tile Flatness IS 13801: 2013 0.01 mm to 10 mm 0.13 mm @ 0.66 Permanent Facility
Mechanical Building Material Chequered Cement Concrete Tile Perpendicularity IS 13801: 2013 0.01 % to 5 % 0.08 % @ 0.25% Permanent Facility
Mechanical Building Material Chequered Cement Concrete Tile Straightness IS 13801: 2013 0.00 % to 5 % 0.06 % @0.22% Permanent Facility
Mechanical Building Material Chequered Cement Concrete Tile Water Absorption IS 13801: 2013 0.1 % to 20 % 0.56 % @7.04% Permanent Facility
Discipline Group Product/Material of test Specific Test Performed Test method Range of Testing/Limit of detection (@±)MU Test Performed at
Mechanical Building Material Coarse Aggregate / Ballast Bulk Density IS 2386 (Part III): 1963 1 kg/L to 4 kg/L 0.02 kg/L @ 1.56 kg/L Permanent Facility
Mechanical Building Material Coarse Aggregate / Ballast Elongation Index IS 2386 (Part I): 1963 5 % to 70 % 1.34 % @ Permanent Facility
Mechanical Building Material Coarse Aggregate / Ballast Flakiness Index IS 2386 (Part I): 1963 5 % to 70 % 1.59 % @ Permanent Facility
Mechanical Building Material Coarse Aggregate / Ballast Impact Value IS 2386 (Part IV): 1963 5 % to 60 % 2.00 % @ 21 % Permanent Facility
Mechanical Building Material Coarse Aggregate / Ballast Los Angeles Abrasion Value IS 2386 (Part IV): 1963 5 % to 70 % 1.67 % @ Permanent Facility
Mechanical Building Material Coarse Aggregate / Ballast Sieve Analysis (Gradation) IS 2386 (Part I): 1963 0.1 % to 100 % 1.26 % @ 100-0.23 Permanent Facility
Mechanical Building Material Coarse Aggregate / Ballast Specific Gravity IS 2386 (Part III): 1963 2to 4 0.04@ Permanent Facility
Mechanical Building Material Coarse Aggregate / Ballast Stripping Value IS 6241: 1971 1 % to 100 % 5.10 % @ 68 % Permanent Facility
Mechanical Building Material Coarse Aggregate / Ballast Water Absorption IS 2386 (Part III): 1963 0.2 % to 20 % 0.02 % @ Permanent Facility
Mechanical Building Material Concrete Compressive Strength (Core) IS 516 (Part IV): 2018 5 N/mm2 to 80 N/mm2 4.31 N/mm2@ 28.78N/mm2 Permanent Facility
Mechanical Building Material Concrete Compressive Strength (Cube) IS 516: 1959 5 N/mm2 to 80 N/mm2 0.57 N/mm2@ 29.31N/mm2 Permanent Facility
Mechanical Building Material Concrete Flexural Strength IS 516: 1959 1 N/mm2to 10 N/mm2 0.28 N/mm2@ 4.11N/mm2 Permanent Facility
Workability by Compacting
Mechanical Building Material Concrete IS 1199 (Part-II):2018 0.75to 1 0.01@0.93 Permanent Facility
Factor
Mechanical Building Material Concrete Workability by Slump Test IS 1199 (Part-II):2018 0.00 mm to 250 mm 6.78 mm @ 108 mm Permanent Facility
Mechanical Building Material Concrete Density of Fresh Concrete IS 1199 (Part-II):2018 0.00 mm to 250 mm 6.78 mm @ 108 mm Permanent Facility
Discipline Group Product/Material of test Specific Test Performed Test method Range of Testing/Limit of detection (@±)MU Test Performed at
Mechanical Building Material Concrete Density of Harden Concrete IS 1199 (Part-II):2018 0.00 mm to 250 mm 6.78 mm @ 108 mm Permanent Facility
Mechanical Building Material Concrete Flow value IS 1199 (Part-II):2018 0.00 mm to 250 mm 6.78 mm @ 108 mm Permanent Facility
Mechanical Building Material Fine Aggregate Bulk Density IS 2386 (Part III): 1963 1 kg/L to 4 kg/L 0.03 kg/L @ 1.73 kg/L Permanent Facility
Mechanical Building Material Fine Aggregate Bulking IS 2386 (Part III): 1963 10 % to 35 % 1.414 % @ 30 % Permanent Facility
Mechanical Building Material Fine Aggregate Sieve Analysis (Gradation) IS 2386 (Part I): 1963 0.1 % to 100 % 4.50 % @ 95.2-2.87% Permanent Facility
Mechanical Building Material Fine Aggregate Fineness Modulus IS 2386 (Part I): 1963 0.1 % to 100 % 4.50 % @ 95.2-2.87% Permanent Facility
Mechanical Building Material Fine Aggregate Specific Gravity IS 2386 (Part III): 1963 2to 4 0.04@2.61 Permanent Facility
Mechanical Building Material Fine Aggregate Water Absorption IS 2386 (Part III): 1963 0.2 % to 20 % 0.04 % @0.44% Permanent Facility
Deflection Measurement of
Mechanical Soil & Rock Field Testing Pavement using Benkelman IRC 81: 1997 0 mm to 10 mm 0.16 mm @ 1.06 SiteFacility
Beam Deflection Test
Discipline Group Product/Material of test Specific Test Performed Test method Range of Testing/Limit of detection (@±)MU Test Performed at
Deflection Measurement of
Mechanical Soil & Rock Field Testing Pavement using falling weight IRC 81: 1997 0.16 mm @ 1.06 SiteFacility
deflectometer
Measurement of Surface
Mechanical Soil & Rock Field Testing Roughness by Fifth Wheel IRC SP 16 : 2019 500 mm/km to 5000 mm/km 172.05mm/km @ 1920mm/km SiteFacility
Bump Integrator
Unconfined Compressive
Mechanical Soil & Rock Soil IS 2720 (Part 10):1991 0.5 kg/cm2 to 25 kg/cm2 0.22 kg/cm2 @ 4.46kg/cm2 Permanent Facility
Strength
Mechanical Soil & Rock Soil Water Content IS 2720 (Part II): 1973 0.50 % to 30 % 0.06 % @0.59% Permanent Facility
Mechanical Soil & Rock Soil Testing (Field) Field CBR IS 2720 (Part 31) 1 % to 30 % 0.49 % @4.6% SiteFacility
Mechanical Soil & Rock Soil Testing (Field) Standard Penetration Test IS 2131: 1981 1 N-Value to 100 N- Value 3.69 N- Value @ 21 N- Value SiteFacility
Mechanical Soil & Rock Soil Liquid Limit IS 2720 (Part 5): 1985 10 % to 600 % 0.67 % @22.5% Permanent Facility
Mechanical Soil & Rock Soil Plastic Limit IS 2720 (Part 5) :1985 10 % to 150 % 1.52 % @ 14 % Permanent Facility
Mechanical Soil & Rock Soil Specific Gravity IS 2720 (Part III) Sec1/2: 1980 1to 3 0.07@2.62 Permanent Facility
Building Materials -
Half Cell Potential Difference
NDT Reinforced Concrete Reinforced Concrete Structure ASTM C 876: 2015 -0.1 Volt to -1 Volt V-0.02 Volt @ @ -0.1792 volt SiteFacility
Test
Structures
Building Materials -
NDT Reinforced Concrete Reinforced Concrete Structure Rebound Hammer Test IS 13311 (Part II): 1992 10 Mpa to 70 Mpa 2.33 Mpa @ 27.6 Mpa SiteFacility
Structures
Building Materials -
NDT Reinforced Concrete Reinforced Concrete Structure Ultrasonic Pulse Velocity Test IS 516 (Part 5, Sec I): 2018 1 km/sec to 6 km/sec 0.5km/sec @ 5.72 km/sec SiteFacility
Structures
Building Materials -
NDT Reinforced Concrete Reinforced Concrete Structure Cover Depth SiteFacility
Structures
Discipline Group Product/Material of test Specific Test Performed Test method Range of Testing/Limit of detection (@±)MU Test Performed at
Building Materials -
NDT Reinforced Concrete Reinforced Concrete Structure Spacing of Reinforcement Bar
Structures
Building Materials -
Diameter of Reinforcement
NDT Reinforced Concrete Reinforced Concrete Structure
Bar
Structures
Job Mix formula for GSB
Job Mix formula for WMM
Job Mix formula for BM,SDBC,DBM,BC
Concrete Mix design for various Grades
Design of Crust overlay for flexible Pavement by BBD and falling Weight Deflectometer
Design for new flexible pavement as per IRC 37
Design for Concrete Pavement