Professional Documents
Culture Documents
2 3
Unique details that make
all the difference.
No more restricted views. The unique, high-speed and spring-loaded cab with full
panoramic windscreen offers you an unrivalled view of every loading job.
4 5
Transforming your daily work
The Fendt Cargo T955 goes where other telehandlers can't,
and gives you a better overview, better performance, more
safety and more comfort. The Fendt Cargo T955 is the first
to combine the best features of a telehandler and a wheel
loader, and is perfectly equipped with a range of clever
details to meet any farming requirements:
Impressively versatile,
uncompromisingly reliable.
6 7
CONCEPT
New machine
concept opens up
new horizons.
8 9
CAB LIFT ARM AND SWING ARM
Best seat in the house The display elements are connected to the armrest and Way out front, but not too far Maximum precision with maximum comfort
Just two steps and you're in the spacious cab of arranged in such a way that they form a line of sight The telescopic arm reaches from the front wheel to the For maximum driving comfort, not only is the cab
the Fendt Cargo T955, which sets new standards in with the right A-pillar. This does away with the usual centre of gravity of the pallet fork (max. 4350 mm). To spring-loaded with a nitrogen bubble, but the telescopic
the telehandler class. Use the foot pedal on the move extensive dashboard. You can control the engine with a prevent overload and the machine tipping forward, the arm can also be equipped with a load swing damping
to continuously raise the cab up to 4.25 m on the start/stop button. Perfect if your work involves lots of Fendt Cargo T is equipped with an overload system. If a system. This effectively intercepts impacts even at high
visual axis. This gives you a perfectly clear view to short stops. critical angle is reached, all functions that could put the speeds. At a slow driving speed, the load swing
fill high-sided vehicles. The floor-to-ceiling safety machine in a dangerous position are locked. damping system is blocked.
glass windscreen also helps. Because of the slim
steering column, there's nothing to obstruct your Comfort first
view. The hydraulic cylinder which lifts up the cab, The optional bucket-return function makes life much Extra strong and unique in shape Push not pull
is also equipped with a nitrogen bubble. This cushions easier. It retracts the telescopic arm all the way in, while The telescopic arm has been designed to be extra The swing arm has Z-kinematics. This system uses the
the cab from impacts while driving, for an ultra- the tilting angle of the attachment moves to the pre- strong and robust. Any torsion is counteracted with a maximum force of the hydraulic cylinder. The pushing
comfortable ride. programmed position. With this option, all the driver has 8-mm thick base body and a 10-mm thick arm. In cylinder achieves a breakaway torque of up to 85 kN.
to do is control the height. The Fendt Cargo T can be addition, the telescopic arm is mounted centrally to This technology is adopted from the wheel loader and
equipped to preheat the engine. If your vehicle has this best channel the resulting forces. Two-sided end promises full power capacity from the telehandler.
Spacious cab with fully-loaded armrest system you can use a 230V connection as well as the position damping supports you in your work.
The spacious cab of the Fendt Cargo T955 offers plenty cab preheating function. This means you can use a
of space and is very bright with large windows. The portable heating system to heat the cab, for example. A
operating armrest and joystick are installed on the comfortable start to the day is a good start to the day.
standard suspension seat, so the suspension
movements do not cause any proportional movements
between the seat itself and the armrest.
10 11
FRAME AND CHASSIS ENGINE AND GEARBOX
Well thought-out through and through Agile, stable and flexible Engine Stepless drive
The machine concept opens up new possibilities right Depending on the tyres, the narrow chassis allows a The Fendt Cargo T features state-of-the-art engine The stepless drive of the Fendt Cargo T955 consists of
down to the frame. You can use the added space to turning radius of less than 4 m. Compact spaces are and exhaust technologies. These sophisticated an axial piston adjustment pump, driven directly by the
attach the lift cylinder to the very top of the frame. This therefore no problem for the Fendt Cargo T. The rear components still leave plenty of room in the engine diesel engine. It detects the accelerator pedal position
ensures both optimum power delivery and a fully closed axle is mounted at a free-swinging angle of 8° as compartment. The air can flow through perfectly, and swivels out depending on the diesel engine speed.
off area under the telescopic arm. There are no nooks standard, for permanent ground contact on the four always preventing the Fendt Cargo T from overheating. Going by the swing angle, it sends hydraulic oil to the
or openings here, which prevents dirt from settling and powered wheels. You can opt for an automatic swing To stop the air grilles and radiators from collecting dust, travel motor in the CompactDrive transmission, which,
endangering the components. axle lock for the rear axle. the vehicle can be equipped with a reversible fan. depending on the load, uses it to generate either a high
speed (fast driving speed) or a lot of torque (driving on
The telescopic arm itself is mounted exactly in the To meet special requirements, the Fendt Cargo T can a slope or into crops). The vehicle has an inch/brake
centre of the vehicle. This prevents torsion and be equipped with a levelling system for the front axle. pedal. With this, the traction drive is disengaged from
damage from day one. With its 8° buffer, the vehicle can deliver maximum the engine speed. At low driving speeds, this provides
stability no matter how uneven the ground. more hydraulic power for the working hydraulics.
12 13
FENDT CARGO T955
Technical specifications.
CARGO T955 CARGO T955
Performance characteristics Electrical features
Max. lift height mm 8500 Batteries Number 2
Max. load (LSP 600 mm) kg 5500 Battery power Ah/V 105 / 24
Max. load at max. height kg 4850
Max. load at max. outreach kg 2400 Tyres
Max. extension mm 4350 Standard tyres 460/70 -24
Tractive power kN 90 1. Optional tyres 500/70 R24
Breakaway torque on the bucket kN 85 2. Optional tyres 600/55 -26.5
Engine Dimensions
Rated power ECE R 120 kW/hp 123/167 Overall length including tool carrier mm 5635
Maximum power ECE R 120 kW/hp 126/171 Overall height, cab down mm 2670
No. of cylinders Number 4 Overall height, cab up mm 4550
Cubic capacity cm³ 4500 Overall width with standard tyres mm 2475
Rated speed rpm 2200 Overall width with max. tyres mm 2750
Max. torque at 1200 rpm Nm 763 Cab width mm 950
Fuel level litres 160.0 Distance from middle of front axle to front of tool carrier mm 1335
AdBlue level litres 16.0 Distance from middle of rear axle to rear of machine mm 1045
Max. ground clearance mm 425
Transmission Wheelbase mm 3250
Transmission type CompactDrive Track width mm 2050
Max. road speed, standard km/h 20 Rear startup angle ° 33
Max. road speed, Option 1 km/h 30 Min. turning radius with standard tyres m 3.98
Max. road speed, Option 2 km/h 40
Max. road speed, reverse km/h 20 (30/40) Weights
Payload and working range Load capacity and working range Unladen weight (standard equipment, full tanks, with driver) kg 11800
Without hydraulic levelling / with swing axle lock Without hydraulic levelling / without swing axle lock Hydraulics Max. trailer load of towing hitch kg 3000
Powershift variable flow pump l/min 200 Max. trailer load of towing hitch, height-adjustable (optional) kg 15000
Operation with bucket Operation with lifting fork
Working pressure bar 310
Flow capacity of auxiliary hydraulics 1 (on boom head) l/min 100
Flow capacity of auxiliary hydraulics 2 (optional, at rear) l/min 65
Flow capacity of auxiliary hydraulics 3 (optional, on boom head) l/min 100
Load capacity and working range Load capacity and working range Dimensions /
Without hydraulic levelling / with swing axle lock With hydraulic levelling / with swing axle lock turning radius in mm
Operation with lifting fork Operation with lifting fork
14 15
It’s Fendt. Because we understand Agriculture.
www.fendt.com
AGCO GmbH – Fendt Marketing Fendt is a worldwide brand of AGCO.
87616 Marktoberdorf, Germany All details regarding scope of delivery, appearance, performance, dimensions and weights, fuel
consumption and running costs of vehicles reflect the latest information available at the time of print.
These may change by the time of purchase. Your Fendt dealer will be happy to inform you about any
changes. The vehicles shown do not feature country-specific equipment.
EN/2001